Supply of Chain Saw, Petrol Brush Cutter and Petrol Pole Pruner at Store of Subhash Mohalla Ward No.233, Shahdara North Zone.
Sl. No.
Item Description
1
PETROL OPERATED CHAIN SAW Engine :SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY Displacement: 45.4CC POWER OUTPUT:2.3Kw. 3.0 HP Max.engine speed (with guide bar & chain ): At least 12500 RPM Carburetor: Diaphragm type & compensator technology. Fuel tank capacity: Should be minimum 450 ml. Dry weight( without cutting attachment ): Should not be more than 5.0 KG Clutch: Clutch shoe LININING metal ONLY. Guide Bar Design: Should be Rollomatic type. Guide Bar Length: Guide bar length must have 50 cm/20\" inch. Guide bar and Chain: Should have same manufacture only. Chain Type: Every drive link require groove & small oil receiver hole for beter Lubrication. 0.325 inch Pitch & 1.6 mm thickness only. chain Lubrication System: Fully automatic ,speed controlled rotary oil pump Chain oil tank capacity: Should be minimum 200 ml. oii Pum Drive: Should have direct drive from Crankshaft & Oil Pump flow adjustable. Master Lever Control: Must have all operation in One Hand, Chock,throttle, Acceleration,switch off. |Guaranteed Sound power level: Should not be more than115 Db(A) Maximum chain velocity to ISO 11681: Should be minimum 28 mis
2
PETROL OPERATED BRUSH CUTTER Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compernsator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right lhandle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 |Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton
3
Supply of Telescopic Pole Pruner: Specification: Pole length including blade: 6.5m Blade Material: Hardened & Tempered high carbon steel. The head of the blade shall have a hooked tip useful for cutting twigs Saw Blade Shape: Hooked type curved saw blade Type & no of cutting teeth :Tripple grounded 86 teeth Blade Length : 15\"-16\" Pole type: Light weight telescopic tubular Aluminium alloy extendable pole No of positions for pole Height Adjustment: 10 positions Locking Mechanism : Ergonomically designed two way locking mechanism Total Working length: Max 219\"(6623 mm), Mln 103\" (3103mm) Branch cutting capacity: 200mm max
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
