Beautification Work Of Kali-Triveni Approach Road - Brick work in superstructure Cement mortar 1:6 (1 cement : 6 coarse sand 2 12 mm cement plaster 1:6 (1 cement : 6 coarse sand) 3 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 5 Wall Mural Painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) conten less than 50 grams / litre, of approvedbrand andmanufacture, includingapplyingadditionalcoatswhererequired,to achieve even shade and colour 6 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50 m x2.00 m made of 40x40x6 mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5 mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5 m. MS channel ISLC 75 @ 5.70 kg/m, 50 cm long shall be provided at the bottom having oval shaped holes of size 50x25 mm at both ends with 50 cm long MS angle 40x40x6 mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250 mm long expansion fasteners at both ends. The work shall be executed as per rawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its aintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. 7 Earth work in excavation by mechanical means {Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (All kind of soil) 8 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 9 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (GRADE BEAM) 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chanas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost ofcentering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). (TOP BEAM) 11 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-5000 ormore 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand) 13 Half brick masonrywith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand) +Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means 14 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. 15 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 16 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete 18 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. 19 Lintels, beams, plinth beams, girders, bressumers andcantilevers with water proof ply 12 mm thick 20 Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay orsand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplusexcavated earth as directed by the Engineer i/c with in a lead of 50m. 21 Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. 22 C.C.workwithcementapprovedcoarse sandand40mmgaugeapprovedstone ballast in proportion of 1:2:4 incl. cost of form work in foundation & floor 23 Centering and shuttering including strutting, propping etc. and removalof form for Columns, Pillars, Piers, Abutments, Posts and Struts 24 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting , hoisting, fixing in position andB+61 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Electric resistance or induction butt welded tubes 25 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zincchromate yellow primer on new work 26 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 6 mm nominal size ), reinforced with1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering ofthe jambs, sills and soffits ( 40 MM) 27 Supplying and stacking sludge at site including royalty and carriage upto 1 km (sludge measured in stacks will be reduced by 8% for payment) 28 Carriage of sludge upto 5 Km 29 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm 30 Carriage of manure upto 5 Km 31 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge 32 Spreading of sludge, dump manure and/or good earth in requiredthicknessasperdirectionofofficer-in-charge (costof sludge,dump manureand/ or good earth to be paid separately). 33 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing, including removal of rubbish and surplus earth, if any with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately) 34 Providing & stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. 35 Providing & stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35cm as per direction of the officer-in-charge 36 Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). With rass Turf. 37 Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. 38 Existing Drain Cleaning
