|
| 1 | Supply and fixing in position of white glazed of 20” size Indiantype water closet with ‘p’ or ‘S’ trap and a pair porcelain foot rest toslaps set in bricks jelly cc 1:4:8100mm thick using 20mm thick jelly and finishing to sludge out any leakage and defaultincludingcost and conveyance of all materials labour charges for fixing inposition and other incidental charges etc., complete as directed by dept. officers. |
| 2 | Floor finishing with colour ceramic tiles of size 305mmx305mmx6mm of approved quality & Colour laid in cement mortar 1:3mix 20mm thick and pointing with white cement using 0.40 kg/m2including cost and conveyance of all labour and materials charges etc., complete |
| 3 | Dadooing walls withGlazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 4 | Supply and Fixing of 50mm Cadappa Slab including all labour charges etc., |
| 5 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 6 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains.(SD - 65) |
| 7 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour |
| 8 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (6points per coil) (SD 20) |
| 9 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and Condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. |
| 10 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K-Lite) suitable for 11W CFL lamp with CFL |
| 11 | Supply the following pipe materials with spericals etc.,complete |
| 12 | 32mm UPVC Pipe |
| 13 | 32mm UPVC Elbow |
| 14 | 32mm UPVC Tee |
| 15 | 32mm UPVC Ball Valve |
| 16 | 15mm Tap |
| 17 | Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.Fully panelled Single leaf - Door 0.90 m x 2.00 m |
| 18 | Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
