Bids Are Invited For Spares Of Pa 1 82426007070 Wall Mounted Pa Stations Ea 30 Complete Wall Mounted Handsets Station For Public Address Sysytem Offered System Should Seamlessly Fit Into Our Existing System Of Lbd-8921/02 Bosch/Philips Or Equivalent Ma, Koraput-Odisha

Bids Are Invited For Spares Of Pa 1 82426007070 WALL MOUNTED PA STATIONS EA 30 COMPLETE WALL MOUNTED HANDSETS STATION FOR PUBLIC ADDRESS SYSYTEM OFFERED SYSTEM SHOULD SEAMLESSLY FIT INTO OUR EXISTING SYSTEM OF LBD-8921/02 BOSCH/PHILIPS OR EQUIVALENT MAKE WITH ALL FUNCTIONALITIES AND FEATURES. THE SUPPLIED MATERIAL SHOULD BE COMPATIBLE WITH OUR EXISTING SYSTEM THEN ONLY MATERIAL SHALL BE ACCEPTED 2 86090560040 Main PCB EA 30 MAIN PCB WITH PRE-AMPLIFIER FOR EXISTING PA SYSTEM OF PHILIPS/BOSCH OR EQUIVALENT MAKE AND MODEL: LBD-8921/02. THE PCB SHOULD ASSEMBLE AS BELOW. I)PCB ASSY.MAIN PCB PART NO.-3915 101 54680 II)PCB ASSY.POWER AMPLIFIRE PART NO.-3915 101 54710 III)PCB ASSY.SWITCH PCB PART NO.-3915 101 39530 IV)PCB ASSY.POTMETER PART NO.-3915 101 35950 3 82202524510 LINE DRIVER TRANSFORMER(TRAFO) EA 30 PAGE RECEIVING TRANSFORMER (3915 10139670), ALSO KNOWN AS PAGE RECEIVER (AUDIO ISOLATION TRANSFORMER) TRANSFORMER IN RESISTANCE VALUE: 800 OHMS TO 1000 OHM TRANSFORMER OUT RESISTANCE VALUE: 1200 OHM TO 1500 OHM TRANSFORMER HEIGHT: 13 MM-15 MM, TRANSFORMER WIDTH: 15 MM THE ABOVE ITEM SHOULD BE COMPATIBLE WITH EXISTING WALL MOUNTED PA STATION OF BOSH/PHILIPS OR EQUIVALENT MAKE AND MODEL: LBD 8921/02. 4 82614172180 TRANSISTOR BDW 93C EA 100 BDW 93C TRANSISTOR, I/CODE NO.82614172180 USED IN LBD 8921/02 OF EXISTING SYSTEM OF MAKE: PHILIPS/BOSCH OR EQUIVALENT 5 82614179130 TRANSISTOR BDW 94C EA 200 BDW 94C TRANSISTOR, I/CODE NO.82614179130 USED IN EXISTING SYSTEM OF MODEL: LBD 8921/02 OF MAKE: PHILIPS/BOSCH OR EQUIVALENT 6 82220040820 CRADLE SWITCH EA 30 A PLASTIC BODY CRADLE SWITCH ASSEMBLY (THIS IS WHERE ON WHICH THE HAND SET IS KEPT) WITH REED RELAY COIL. THE HAND SET REST IS REQUIRED FOR LBD 8921/02 OF BOSCH/PHILIPS OR EQUIVALENT MAKE PA SYSTEM. THE SUPPLIED MATERIAL SHOULD BE COMPATIBLE WITH OUR EXISTING SYSTEM. 7 37201024070 DESK TOP STATION 8904 EA 10 THE DESKTOP HANDSET STATION LBD 8904/00 CONSISTING OF FIBER GLASS HOUSING WITH A HANDSET. THIS SINGLE ELECTRONIC MODULE SHOULD PROVIDE THE NECESSARY PRE- AMPLIFICATION AND SIGNAL PROCESSING. IT SHOULD OPERATE AS COMPLETE HANDSET STATION WITH ALL THE FUNCTIONS OF A STANDARD INDUSTRIAL PUBLIC ADDRESS SYSTEM WHEN USED WITH EXTENSION AMPLIFIER LBD 8924. ANY PRODUCT SHALL BE ACCEPTABLE IF THE SUPPLIED PRODUCT IS AS PER THE SPECIFICATION OF EXISTING SYSTEM OF LBD 8904 (PHILIPS/BOSCH MAKE OR EQUIVALENT). 8 83001030050 JUNCTION BOXES FOR PA SYSTEM EA 20 JUNCTION BOX TO BE OF INDUSTRIAL GRADE LM6 MATERIAL (SHOULD BE WEATHER PROOF, SHOULD ENDURE INDUSTRIAL OUTDOOR CLIMATIC CONDITIONS AND CAUSTIC). SHOULD HAVE BUILT-IN CONNECTORS FOR SIGNAL CABLE <(>&<)> MAINS CABLE ALONG WITH THE FCS. PROVISION OF MULTILAYER PCB WITH THE CONNECTORS FOR FIELD CONNECTIONS LIKE PVT, PAGE <(>&<)> FS SIGNAL etc. SHOULD BE GIVEN. PRODUCT WILL BE ACCEPTABLE IF THE SAID PRODUCT SHALL BE AS PER THE SPECIFICATION OF EXISTING SYSTEM OF MODEL: LBD 8930/00, MAKE: PHI LIPS/BOSCH OR EQUIVALENT. 9 82423026070 DRIVER UNIT LBD 8304 16 DHMS EA 20 IGNORE SHORT DESCRIPTIONS DRIVER UNIT WITH LINE MATCHING TRANSFORMER LBD 8308. 40WATT 16 OHMS 1)DRIVE UNIT HEIGHT SHALL BE: 90MM-95MM 2)DRIVE UNIT WIDTH SHALL BE: 85MM-90MM SHOULD HANDLE FREQUENT FIXING/REMOVAL OF THE DRIVE UNIT. PRODUCT SH BE ACCEPTED IF THE SUPPLIED PRODUCT IS AS PER THE SPECIFICATIONS OF EXISTING MODEL LBD 8308M, MAKE: PHILIPS/BOSCH OR EQUIVALENT. 10 82202524520 Microphone Capsule for PA System EA 30 SHOULD BE COMPATIBLE WITH THE MOUTH PIECE MICROPHONE FOR EXISTING SYSTEM OF MODEL: LBD-8921/02, MAKE: PHILIPS/BOSCH OR EQUIVALENT 11 82426038011 STAND FOR HANDSET OF PA SYSTEM EA 20 IGNORE SHORT DESCRIPTIONS COMPLETE HAND SET FOR LBD 8921/02 SHOULD CONSIST OF THE FOLLOWING ITEMS1. MICROPHONE CAPSULE: MOUTH PIECE MICROPHONE COMPATIBLE WITH EXISTING MODEL LBD-8921/02, MAKE: PHILIPS/BOSCH 2. COIL CHORD: COIL CORD FOR HANDSET COMPATIBLE WITH EXISTING MODEL LBD 8921/02 OF BLACK COLOUR (PREFERABLY) 3. SHOULD BE COMPATIBLE WITH EXISTING SYSTEM OF MAKE: PHILIPS/BOSCH OR EQUIVALENT 4. RECEIVER CAPSULE: COMPATIBLE WITH HAND SET LBD 8921/02, MAKE: PHILIPS/BOSCH ALONG WITH REQUIRED ACCESSORIES NOTE: ONE SAMPLE FROM EACH OF THE ABOVE ITEMS TO BE SUPPLIED BEFORE FINAL BULK SUPPLY, FOR TESTING/APPROVAL FOR COMPATIBILITY WITH THE EXISTING PA SYSTEM AT ALUMINA PLANT. IF NOT COMPATIBLE WITH THE PRESENT PA SYSTEM, THEN SAME WILL NOT BE ACCEPTED. Total Quantity : 520

Refer document

Refer document

Refer document