|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | All kinds of soil |
| 5 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 11 | W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 13 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 14 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 15 | Flat back wash basin of size 550x400 mm. |
| 16 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 17 | Semi rigid pipe |
| 18 | 32 mm dia |
| 19 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 20 | Rectangular shape 453x357 mm |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 22 | 20 mm nominal outer dia. Pipes. |
| 23 | 25 mm nominal outer dia .Pipes. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 25 | 25 mm nominal outer dia. Pipes. |
| 26 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 27 | 30 cm length |
| 28 | 15 mm nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 30 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 31 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 32 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 33 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 34 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 35 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 36 | Providing and fixing PTMT grating of approved quality and colour. |
| 37 | Circular type. |
| 38 | 100 mm nominal dia. |
| 39 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 40 | 15 mm nominal bore with 45 cm length. |
| 41 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 42 | 25mm nominal bore. Weighing not less than 62 gms. |
| 43 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 44 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 45 | 100x100 mm size P type |
| 46 | With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 47 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 48 | Inside size 90x80 cm and 45 cm deep including precast RCC manhole cover and frame : L D - 2.5 : Rectangular shape 600x450 mm internal dimensions. |
| 49 | With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 50 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 51 | L D - 2.5 |
| 52 | Rectangular shape 600x450 mm internal dimensions |
| 53 | Providing. Laying and jointing Foam corePVC drainagepipes, including necessaryfittings etc , jointing with solvent and testing for water leakages etc all complete as per the directions of Engineer-In-Charge solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant . (I)Single socketed pipe(couplings, other accessories will be paid separately) |
| 54 | 100 mm dia |
| 55 | Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. |
| 56 | 20 mm nominal bore |
| 57 | 25 mm nominal bore |
| 58 | Providing and fixing CPVC union in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. |
| 59 | 20 mm nominal bore |
| 60 | 25 mm nominal bore |
| 61 | providing and fixing PTMTHealth pauset set with wall support lever of 15mm nominal borePTMTnozzle jet and handle of approved quality and make for EWC |
