Tender For Major Repair At Ghs Proper Marhoon, Pyt. Marhoon Block Baggan District Kathua Under Pm Shri Scheme Approved Under Pab For The Year 2023-24 For The Financial Year 2024-25
Tender Value
3 Lakhs
Estimated cost
Bid Submission
19 Nov 2024
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
baggan → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Major Repair At Ghs Proper Marhoon, Pyt. Marhoon Block Baggan District Kathua Under Pm Shri Scheme Approved Under Pab For The Year 2023-24 For The Financial Year 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge in cement mortar. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 25meter from cutting edge and disposal of surplus excavated earth as directed: |
| 3 | All kinds of soil 70% |
| 4 | Ordinary rocks 30% |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand). Including extra for Super structure |
| 8 | Half brick work with F.P.S. bricks ofclass designation 75 in foundation and plinth in:1cement : 4 Coarse sand mortar. |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars @ 90 Kg/Cum |
| 13 | 6mm cement plaster to ceiling of mix 1:3 |
| 14 | 12mm thick cement plaster of 1 cement: 6 fine sand mix. |
| 15 | 15 mm Cement plasteron the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 16 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 20 | Providing and laying/fixing ceramic Glazed Floortiles 300X300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved makein all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete. |
| 21 | Providing & laying flooring of40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 22 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade (Asianpaints, Kansai Nerolac, Indogo, Berger, Dulux, Shalimar, British Paints, etc) |
| 23 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 24 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 25 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid. |
| 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Cera, Jaquar, Hindware, Parryware, etc.) |
| 28 | Providing and fixing wash basin with C.I. brackets, 15 mm CP pillar cock, 32 mm CP waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm CP Pillar cock. |
| 29 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 30 | Providing and fixing G.I pipe to IS ( MediumClass) with fitting upto 150mm dia & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls)& includes testing of joints.20mm Dia Pipe |
| 31 | Providing and fixing G.I pipe to IS ( MediumClass) with fitting upto 150mm diad & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls) & includes testing of joints.25mm Dia Pipe |
| 32 | Providing and Fixing of G.I/PVC fittings. 75 mm PVC Pipe |
| 33 | Providing and Fixing of G.I/PVC fittings. 110mm Dia PVC Pipe |
| 34 | Providing and Fixing of G.I/PVC fittings. 110mm Plain Bend |
| 35 | Providing and Fixing of G.I/PVC fittings. 75mm plain Bend |
| 36 | Providing and Fixing of G.I/PVC fittings. Floor Trap 75mm Dia |
| 37 | Providing and Fixing of G.I/PVC fittings. Floor Trap110mm |
| 38 | Providing and Fixing ofPVC Bal value 20mm |
| 39 | Providing and Fixing of20mm Tank Nipple |
| 40 | Providing and Fixing of Soap Dish |
| 41 | Providing and Fixing of Bevelled LookingGlass (600x450)mm |
| 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 44 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 45 | Providing and fixing Cpgrating of approved quality 100 mmofnominal dia |
| 46 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre |
| 47 | Providing and Fixing of white vitrous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:2556 |
| 48 | Providing and Fixing of GI flush pipe and C.P. brass spreader including C.P connecting pipe range of two lipped urinals |
| 49 | Providing and Fixing of white viterous Chinna Urinal Partition plate Size 160x400x825mm Including Fittings.two lipped urinals |
| 50 | Supply and fixing 9W LED lamp |
| 51 | Wiring for light point/ fan point/ exhaust fan point/with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 52 | Providing and making CIBas per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R. (Painting and writing only ) |
| 53 | Carriage of Sand & Agg. 25.00 Km by M.T and 3km A.T from source to side of work |
| 54 | Carriage of cement for 25KM by M.T and 3km at AT from source to side of work |
| 55 | Carriage of Bricks 90.00 Km by M.T and 3km by A.T from source to side of work |
AI Tender Summary
Tender Timeline
Nov 13, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 20, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender