Tender For Supply And Laying Cables And Reinstallation Of Poles Near Sea Beach Of Digha - Dismantling Of Existing 50 Nos Pole And Pole Muffing . 2 Erection Of Frp/Single Steel Tubular Pole Upto 9 Mtrlength As Given Below With/Without Sole Plate & Cap Et, Medinipur East-West Bengal

Supply and Laying Cables And Reinstallation Of Poles Near Sea Beach Of Digha - Dismantling of existing 50 nos pole and pole muffing . 2 Erection of FRP/Single Steel tubular pole upto 9 mtrlength as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly 3 Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl.drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box 4 Supply and fixing of 4 Nos. M24X 750 foundation bolts as per EN-8 Grade manufactured fromspecial stainlessteel along with nuts, washers, and templates. 5 Supplying of 1.1 KVGradeXLPE Aluminium conductor, PVC sheathed, armoured cable conformingto IS 7098, of earthed system of following size.[ Make : Gloster / Polycab / Havells / RR Kabel ] 6 4 core 16 sqmm 7 Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½& 4 core [2(a)/F-1 ] 8 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 16 sqmm 9 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 16 sqmm 10 Cement Concrete road cutting avg. dept. 1ft x avg. width. 1 ft including mending finishing good damages to original finish concrete floor by net cement concrete. 11 Inter connection of compound light fittings by 3 x 1.5 Sq. mm. PVC insulated copper wire ( Finolex/Polycab/Havells)from loop box inside the pole to light fittings through pole & bracketwith 13mm dia 3mm thick Polythene Pipeas perdirection of EIC 12 Supply & fixing 80 mm dia HDPE and laying along the pavement as per direction of E.I.C. 13 Earthing with 50 mm dia GI pipe (ISI-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts 14 Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. 15 Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil 16 Earthing with15mm dia 3 m long G.I Earth Spike 17 Extra for providing masonery enclosure of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) including RCC 100 mm slab oh appropiate size to cover the masonery enclosure near pole and fidderpiler for keeping cable loop.

Refer document

INR 38000.0 /-

Refer document