Tender For Repairs To Partition Between Gun Shop And Fettling Shop
Tender Value
70.90 Lakhs
Estimated cost
Bid Submission
03 Dec 2024
0 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Partition Between Gun Shop And Fettling Shop Repairs To Partition Between Gun Shop And Fet.Shop And Provision Of Office Space Inside Gun Shop In Bldg No. Extension Of Gun Shop 02 Including Reactivation Of Lightning Arrestor And Provision Of Turbo Ventilators In Bldg 02 As Per Scope Of Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed |
| 2 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for as directed |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil and getting out as directed |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft loose soil and all as directed |
| 5 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar all as directed |
| 6 | M&L for Hard core, broken to gauge n exc 63 mm broken stones /boulders as directed |
| 7 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as directed |
| 8 | M&L for flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter as directed |
| 9 | M&L for Cement concrete,(Type D2 1:4:8 40 mm graded aggregate) in foundations, filling and mass concrete,all as directed. |
| 10 | M&L for Reinforced cement concrete (nominal mix)(Type B1 1:2:4 20 mm graded concrete) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete as directed. |
| 11 | S&F, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed |
| 12 | S&F Mild steel round bars 6mm to 8mm dia.Fe-410-W,(Gde.E-250),quality-A or Fe 290 (Gde -E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed |
| 13 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Columns, pillars, piers, posts and struts as directed |
| 14 | M&L Flat Formwork square, rectangular, polygonal to sides of pillars, posts, struts, piers, columns and stanchionsas directed |
| 15 | M&L Flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. as directed |
| 16 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span as directed |
| 17 | M&L for Brickwork woth subclass \"B\"bricks., straight or curved on plan exc 6m mean radius built in cement mortar 1:6 as ddirected. |
| 18 | M&l Rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surface and rendering is to be finished even and smooth (without using extra lime or cement) and all as directed |
| 19 | M&l , Surfacepreparatiopn of new wall surfaces, Priming plastered and other surfaces with one coat alkali resistant priming paint, and applyingone coat of distemper oil emulsion and s subsequent coat of distemperoil emulsion on it |
| 20 | M&L, |Preparation and Painting new wall surfaces with two coats synthetic enamel ordinary tint of any description over 10cm girth or width, not otherwise described |
| 21 | M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) Fe290-W (Gde-E-165) and all as directed |
| 22 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (make: Tata durashine, everest,JSW or equivalent.) of approved colour having tensiles strength of 550 MPA as in roof coverings, north light curves, ridges etc. fixed with seld tapping screw and all acessories complete as specified and as diected |
| 23 | S &F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/claidding to wall, fixed with self tapping screws as specified and as directed. |
| 24 | M& L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of aluminium paint, as directed |
| 25 | S&F Mild steel plates (plain or chequered) channels, square cut ornotched (ordinary and countersunk) foriming holes, without any attachment FE410-W (Gde-E-250) quality-A and all as directed |
| 26 | M&L Mild steel rag or lewis bolts dia up to 20mm, screwed one end,with hexagonal or square nuts and washers , the other end enlarged and jagged oor lewised but length of bolt exc 15 cm and n exc 30 cm long and all as directed. |
| 27 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc with powder coating of colour (as directed) (Thickness of powder coating not less than 50 micron) complete all as specified. |
| 28 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with powder coating of colour (as directed) (Thickness of powder coating not less than 50 micron)complete all as specified |
| 29 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with powder coating of colour (as directed) (Thickness of powder coating minimum 50 micron). . complete all as specified and directed. |
| 30 | S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane. All as directed |
| 31 | S&F for ACP sheet thickness 3 mm including necessary required accessories such as joining cleats, glazing clips, rubber neoprene packing etc complete as directed |
| 32 | S & F Anodised aluminium snap grid frame Size 605X605 mm work for false ceiling all as specified and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 33 | M&L Non asbestos fibre cement building boards 6 mm thick fixed or laid/ inserted to timber/GI/ Aluminium framework with screws all as directed |
| 34 | S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:but gear operated type with bevel gear box and crank handle Thickness of laths(1.25 mm) all as directed. |
| 35 | S&F for Ball bearing for rolling shutter. |
| 36 | S&F for Safety lever locks mild steel with 4 levers for rolling shutters. |
| 37 | Removing building materials etc. aggregate (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 500 meter, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as directed |
| 38 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes 1:6 cement plaster all as directed |
| 39 | M&L Virified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 40 | S&F Turbo ventilator (industrial air blowers with FRP sheet matching with existing roof sheet profile) over existing galvalume roof sheets, including cutting existing sheets, taking down and refixing existing sheets all as required and directed, having turbine dia 28 inches, height 18 inches, throat diameter 24 inches, material of vane blades- stainless steel, bearings- self lubricating to ensure frictionless rotation even at lowest wind velocity, in roof sheeting including fixing arrangements complete all as specified, all approved. |
| 41 | S&F air termination, single pointed, copper rod 12 mm dia and 300mm long. |
| 42 | S&F Aluminium strips 25 mm X 3 mm complete with saddles and fixing screws for fitting the strips. |
| 43 | S&F test point terminal block made up of gunmetal or phosphorous bronze size 75X75X25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. Head screw. |
| 44 | S&F GI tubing medium grade 40mm bore in vertical of 1.0 m length for mounting of air terminiation rod and embedded in PCC. |
| 45 | M&L for earthing complete with galvanized steel earth plate electrode 600mmX600mmX6mm thick, buried directly into ground(earth pit not less that 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, collected to galvanized earth strip of size 32 mm X 6mm by means of bolts, nuts, chucknuts and washers of galvanized iron or steel connected to earthing test point all as specified incl. excavation and earth work and disposal of surplus soil incl. 40mm GI tubing medium grade and necessary fitting for protection of GI strip incl. laying of charcoal dust and common salt PCC (1:2:3) type C1 using 20mm stone aggregate earth pit with 40X40mmX6mm MS angle iron frame, RCC cover 40mm thi ck (1:2:4) type B0using 12.5 mm grading stone aggregate reinforced with 6mm dia round bars @ 75mm c/c of both ways with MS handle 12 mm dia, plastering 15 mm thick CM 1:6 internally and upto 150 mm below ground level externally, PGI funnel with 20mm dia GI pipe medium grade for watering and wire mesh complete all specified and shown on electrical plate no. 03 of SSR 2009 part 2 and connected to earth test incl. testing complete all specified and directed. |
| 46 | CONTRACTORS\" PROPERTY/ CREDIT ITEM: The Demoliton/Dismantled materials i.e. Old rusted, damaged structural steel will be contractor\"s property & deduction will be made on these materials.The contractor should visit the site before making quotation. |
AI Tender Summary
Tender Timeline
Nov 12, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender