Construction work of Sulabh toilet near Badi Dargah in Zone-08 Ward-52 Haveli. - Earth work Exavation in foundation as in wet and foul position leadlift &30 m lead with aqll complete work (S.I.No.251) 2 Cartage of earth upto 5 km. distance from site with all complete work. 3 PCC 1:2:4 cement sand and 40mm brick ballast and all compelte the work (s.I.No.-273) 4 PCC 1:4:8 cement sand and 40mm brick ballast and all compelte the work (s.I.No.-273) 5 R.CC work (1:2:4) with cement course sand &20mm the stone grit including all complete work (S.I.No.279B) 6 1st class brick work (1:4) cement sand mortor including all complete work (S.I.No.303) 7 R.CC work (1:1.5:3) with cement course sand &20mm the stone grit including all complete work (S.I.No.285) 8 R.CC work (1:1.5:3) with cement course sand &20mm the stone grit including all complete work (S.I.No.288) 9 1nd class brick work (1:4) cement sand mortor including all complete work305+309+310 10 1rd class brick work (1:4) cement sand mortor including all complete work 305+309+310+310A 11 R.CC work (1:1.5:3) with cement course sand &20mm the stone grit including all complete work (S.I.No.285) 12 1th class brick work (1:4) cement sand mortor including all complete work 305+309+310 13 1th class brick work (1:4) cement sand mortor including all complete work (S.I.No.303) 14 M.S iron work including cutting bending and praper laying all complete work (S.I.No.504) 15 Sand filling in the plinth i.c supply of necessary quality of sand from a distance not exceeding 8km etc all complete work 16 supply and fixing 6mm china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and aproved coarse sand mortar etc all complete work 17 Providing and laying Polished Granite stone flooring in required design and patterns, In linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge DSR 2023.11.56.2 18 12 mm thick cement plaster with cement and fine sand of 1.25 fineness modulus on brick work in proportion of 1:4cement mortar complete 19 12 mm thick cement plaster with cement and fine sand of 1.25 fineness modulus on brick work in proportion of 1:4cement mortar complete 20 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complet DSR 13.8 21 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.S.I. no. 649+651 22 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 23 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer in-charge DSR 9.117.1 24 P/F Factory made uPVC made uPVC door frame DSR 9.147A.3 25 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm dia. dsr 12.41.2 26 Standerd water bproofing Methodology cleaning the surface of all loose material, dirt & grit, coating exposed slab surface with water proofing chemical as instructed by E/I. Top coat cover in M15 cement concrete with 8mm aggregate, with a minimum thickness of 50 mm and laid to gradient to drain of all surface water 27 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests DSR2023.17.1.1 28 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required W.C. pan with ISI marked white solid plastic seat and lid 29 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, Including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern dsr 2023.17.4.1 30 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tab dsr 2023.17.7.2 31 S/F of fresh air fan with complete set made og bajaj/hevells, crompton etc heaving 12 dia 32 P/F of urinal devider made of 20 mm thick black granite slab 33 P/F C.P. brass long body bib cock of approved quality confirming ti IS standered and weighing not less than 690 gms 15 mm bore 34 P/F 16 mm M.S. clamps of standard shape and size in R.C.C. slab i/c cutting chase, enchoring clamp to RFT. Bar 35 S/F of cellling fan with complete set made of bajaj, crompton, Havells etc having 48 dia 36 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Dsr 2023.17.31 37 P/F in position collapsible steel shutter with vertical chennels 20x10x2 mm and braced with flat from top and bottom rails of T iron 40x40x6 mm with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete S.I. no. 518 38 Supply and fixing of inoguration black granite stone padestal i/c grooving matter, b/w, plaster, painting etc all complete work 39 Plumbing 40 Electrification, pump, led light
