|
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in in soft/disintegrated rock complete all as specified and directed. |
| 2 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified anddirected. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified anddirected |
| 4 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting pointcomplete all as specified and directed |
| 5 | Material and labour Cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 6 | Material and labour for RCC (M:30) 20mm graded aggregate as infoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | Material and labour for RCC (M:30) 20mm graded aggregate as in Columns, pillars, piers posts and struts complete all as specified and directed. |
| 8 | Material and labour for RCC (M:30) 20mm graded aggregate as in Beams, lintel cantilevers, bressummers, lintels over 1.5m spanand in shelves and the like complete all as specified and directed. |
| 9 | Material and labour for (M30) RCCWalls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 10 | Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 11 | Material and labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, ressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.forincluding fair surfaces of finished concrete surfacescomplete all as specified and directed. |
| 12 | Material and labour forFormwork to sides of pillars,posts, struts, piers, columns and stanchions for fair finished concretesurfaces complete all as specified and directed |
| 13 | Supply and Fix Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. |
| 14 | Supply and Fix MS TMT Bars of 5 mm dia and overup to 10 mm diain stirrups, spacers and binders,cut to length bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and bindingwithand including MS wire annealed not less than 0.9 mm dia or securing with clip complete all as specified and directed |
| 15 | Material and labour Brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified as directed |
| 16 | Material and labour brick work with fly ash bricks straight or curved on plan not exceeding 6m mean radius built in old size brick in CM 1:6 complete all as aspecified and directed |
| 17 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as aspecified and directed |
| 18 | Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed |
| 19 | Material and labour for two coat of oil bound distemperon plastered surfaces ofwalls including prepartion of new surfaces.complete all as specified and as directed. |
| 20 | Material and labour for preparation of new plastere surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 3mm wall care putty on new surface completeall as specified and directed. |
| 21 | Supply only integral waterproofing compound complete all as specified and directed. |
| 22 | Supply and Fix Roof trusses Angle/tubular Fe 410-W(Gde-E- 250) quality-A (framed), trussed, including purlins, rafter ,gusset plate ,nut bolt ,crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat sec) including distance pieces cleats etc complete all as aspecified and directed |
| 23 | Supply and Fix for Compound girders ,angles and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,Fe 410-W(Gde-E- 250) quality-A (framed) etc. complete all as specified and directed. |
| 24 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum getting out iin soft/disintegrated rock, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distancenot exceeding 50 m and making good surface. complete all as specified and directed. |
| 25 | Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 26 | Supply and Fix Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 27 | Supply and Fix forPre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding (eaves board) to wall fixed with self tapping screws complete all as specified and directed Note- Plain Galvalume sheet will be fix with wall after necessary grove cutting |
| 28 | Material and labour for preparation of steel and iron surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed |
| 29 | Material and Labour for moorum/red bajari fillingnot exceeding 15cm thick layers complete all as specified and directed. |
| 30 | Material and labour for Hardcore of broken stone or boulder of gauge exceeding 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed |
| 31 | .Material and labour PCC 1:4:8 type D-2, 75 mm thick using 40 mm graded aggregate as sub base complete all as specified and directed |
| 32 | Material and labour 25mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate)finished even and smooth without using extra cement complete all as specified and directed |
| 33 | Material and labour 75mm thick 1:3:6 type C-2,(40mm gradded aggregate) PCC in plinth protectionfinishing cement concrete evenand smooth without using extra cement complete all as specified and directed |
| 34 | Supply and fix false ceiling work of aluminium anodised snap grid frame work, size of grid 605 X 605mm , 6mm thick Everest designer boards or equivalent fixedAluminium frame work with screws, including hangers 6mm dia, G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 X 3mm size 60mm long as in ceilings complete all as specified and directed. |
| 35 | Supply and Fix Non skid ceramic colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes,complete all as specified and directed |
| 36 | Supply and Fix Glazed ceramic tiles (coloured tiles) in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4on other than fair face of brick work complete all as specified and directed |
| 37 | Supply and Fix forSupply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete all as specified and directed. |
| 38 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and directed. |
| 39 | Supply and Fix 100 long butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 40 | Supply and Fix Aluminium barrel tower bolt stove enamelled black, with bright bolt 150 mm size complete all as specified and directed |
| 41 | Supply and Fix Aluminium 150 mm long handles cast type anodised complete all asspecified and directed |
| 42 | Supply and Fix 250 mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedalloy and fixed sections or cast-aluminium complete all as specified and directed |
| 43 | Supply and Fix forWhite vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and connections including 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed. |
| 44 | Supply and Fix inPVC valve less, symphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle including brackets complete high level, flush pipes of PVC 32 mm dia for low level cistern, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm, 15mm CP angle stop valve fancy type etc complete all as specified and directed |
| 45 | Supply and Fix wash hand basinwhite flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar tap chromium plated swan neck 15mm, PVC connection 15mm size with PTMT nuts of length 450mmincluding cutting for and pinning in ends of brackets for erecting stand etc.including32 mm PVC waste pipe etcand 15mm CP angle stop valve fancy type etc complete all as directed complete all as specified and directed. |
| 46 | Supply and Fix for600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup waste washer. complete all as specified and directed. |
| 47 | Material and labour for vitreous china bowl urinal flat black, size of 465x355x265mm white with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe)including fixed in PVC connection 450mmand angle cock Ptmt 15mm bore complete all as specified and directed. |
| 48 | Supply and Fix forVitreous china urinal partition white of size 310x700 mm. complete all as specified and directed. |
| 49 | Supply and Fix inBrass chromium plated shower rose 125mm with 450mm arm complete all as specified and directed. |
| 50 | Supply and Fix inSheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 51 | Supply and Fix in Towel rail \"D\" type 60 cm long brass chromium plated 20mm dia with brackets fixed to walls. complete all as specified and directed. |
| 52 | Supply and Fix for factory made uPVCcolouredfixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete all as specified and directed. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 53 | Supply and Fix 4 mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 54 | Supply and Fix Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed complete all as specified and directed. |
| 55 | Material and labour for Providing and laying 60mm thick colouredfactory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 56 | Material and labour forcoloured chequered cement concrete tiles 20cmx20cmx25mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20 mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 57 | Supply and FixFancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm. complete all as specified and directed. |
| 58 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 59 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 60 | Supplying and laying of 40mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 61 | Supply and Fix forin CPVC 20mm Brass Elbow (3/4 x 1/2) complete all as specified and directed. |
| 62 | Supply and Fix forin CPVC 20mm Brass Tee complete all as specified and directed. |
| 63 | Supply and Fix for in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 64 | Supply and Fix forin CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 65 | Supply and Fix PVC (SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 66 | Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 67 | Supply and Fix PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 68 | Supply and Fix PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as aspecified and directed |
| 69 | Supply and Fix PVC bends 110 mm bore complete all as a specified and directed |
| 70 | Supply and Fix PVC (SWR) junctiion (Single T) equal or unequal 110 mm bore complete all as specified and directed |
| 71 | Supply and Fix PVC (SWR) reducers 110 mm bore complete all as specified and directed |
| 72 | Supply and Fix PVC (SWR) vent cowl 75 mm bore complete all as specified and directed |
| 73 | Supply and Fix Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including Ball brass valve 20 mm bore, high pressure with polythene ball & float complete all as specified and directed. |
| 74 | Supply and Fix 20 mm bore dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 75 | Material and labour for Concrete bed to 200 mm bore drain pipes to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;n Cement concrete (1:3:6), type C-2, complete all as specified and directed |
| 76 | Material and labour for Reinforced concrete pipes of 200 mm bore dia,class NP3, laid and jointed complete with collars, with and including testing,complete all as specified and directed. |
| 77 | Material and labour forprecast concrete type B1, 1: 2: 4 (20 mm graded aggregate) as in manhole covers slab set in CM 1:4 complete all as specified and directed. |
| 78 | Material and labour for cement concrete Type B-0 1:2:4 (12.5 mm graded aggregate) in copping, rounded or chamfered on edges and the like complete all as specified and directed. |
| 79 | Material and labour point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC FRLSH conduit (medium grade) Concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including Sunken Iron Boxes / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws including modular cover plates and cover frame any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories including making good of wall surface by cementing / plastering, applying wall putty including 02 coats of distempering in disturbed surface with existing colour all as specified and directed complete all as specified and directed |
| 80 | (a) One light point controlled by one way switch. |
| 81 | (b) One exhaust fan point controlled by one way switch |
| 82 | Material and labour for point wiring for 15Amp independent socket point controlled by one switch complete with 1100 Volts grade 2.50 Sqmm PVC insulated unsheathed multistranded FRLSH grade copper conductor cablefixed/ drawn through and includingnon-metallic, rigid non metallic PVC FRLSH conduit (medium grade) Concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including Sunken Iron Boxes / pressed steel modular terminal boxes any size/module, concealed on walls and fixed by means of brass screws including modular cover plates and cover frame any size/modulemounting switches, sockets, regulators etc and providing one run of 2.5 sqmm PVC insulated unsheathed multistranded FRLSH grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 83 | Supply and fix Switch socket combination 3 pin 16A, flush type universal, 240 Volt, white finish complete all as specified and as directed. |
| 84 | Material and labour for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and as directed. |
| 85 | Supply and fix ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and as directed. |
| 86 | Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed. |
| 87 | Supply and fix MCB SP 240volts, 6-32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. |
| 88 | Supply and fix MCB SPN 240volts, 6-32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. |
| 89 | Supply and Fixing LED light fitting 1 x 20 watt 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 90 | Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 91 | Supply and Fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 92 | Supply and fix LED light fitting 1x 9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed. |
| 93 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including making suitable hole on wall and making good complete all as specified and as directed. |
| 94 | Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 3 of SSR Part-I complete all as specified and as directed.Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 95 | Supply and Laying in trenches galvanised steel water tubing of medium grade with and including all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site, laid in trenches including dismantling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and directed Note:- (i) Excavation and earth work shall be measured and paid separately under relevant item of Sch \"A\"(ii) The rates quoted inclusive of cutting, jointing and testing of the pipe (iii) All other fittings required shall be provided by the contractor at his own cost.Bore of tube 25 mm Dia |
| 96 | Supply and fix Gun metal valve 25 mm (1”) dia pipe with iron wheel thread screwed with both ends for iron pipes complete including dismantling of old unsv gate valve fixed at any location complete all as specified and as directed. |
| 97 | Supply and Fix float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs for the following sizes.complete all as specified and as directed.(a)25 mm dia (minimum weight 210 gms) |
| 98 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation laying of pipe line etc and getting out in hard/dense soil complete all as specified and as directed. |
| 99 | Supply, lay and connect cable XLPE Insulated screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including taking down old unserviceable service wire/cable of any size complete all as specified and as directed. |
| 100 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specifiedand directed |
| 101 | Supply and Laying DWC HDPE pipe of outer dia of 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and directed. |
| 102 | Supply and fixing galvanised pipe light grade of ISI marked 40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed. |
| 103 | M&L point wiring with 1.5 sqmm (Nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through PVC casing and caping of suitable sizes (medium grade) ISI marked) on wall/ ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour), with PVC board of suitable sizes for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light/ fan/ exhaust fan/ call bell point controlled by one 5/6 Amps switch, complete incl making good of wall surface by cementing/ plastering, applying wall putty incl 02 coat of distempering in disturbed surface with existing colour compete all as specified and directed. |
| 104 | S & F switch piano, flush type single pole, one way 6 Amp compete all as specified and directed. |
| 105 | Supply and fixingexhaust fans AC single phase 230 volt metalic body of size 300 mm sweep with louver, 1300-1400 RPM complete with bolts nuts and washers size of the bolt 15 cm long 13 mm dia embeded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhuast fan for connection and fixing the exhaust fan complete all as specified and directed. |
| 106 | Supply and Fix surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals on PVC block white finish complete all as specified and directed |
| 107 | Material and labour for cutting the existing wall in sqare/ round shape suitable for fixing Exhaust fan in cement morter (1:3) work including material and labour for 4 nos long bolt, nut, washers of required size and making good the disturbed surface complete all as specified and directed. |
| 108 | Supply and laying galvanised steel water tubing of medium grade of dia 25mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.Note: Excavation and earth work shall be measured and paid seperately under relevant item of Sch \"A\" |
| 109 | All as peritem No. 108 here in before but for size of dia 20mm |
| 110 | Supply and fix gun metal gate valve 20mm dia heavy duty ISI marked with iron wheel head screwed both ends for iron pipe with all fittings complete all as specified and directed . |
