|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Excavation in foundation in ordinary soil lift up to 1.50 m and lead up to 30 m complete in all respect. |
| 3 | Add for every additional 30m lead or for addition lead 1.50 m |
| 4 | Add for every additional 30m lead or for addition lead 1.50 m |
| 5 | sand filling in plinth complete in all respect. |
| 6 | Cement Concrete in 1:4:8 cement c sand and4cm gauge approved stone ballast complete in all respect. |
| 7 | R.C.C work with 1:1.5:3 cement csand and 20 mm dala stone grite complete in all respect. |
| 8 | R.C.C work with 1:1.5:3 cement csand and 20 mm dala stone grite complete in all respect. But R.C.C T beam collumn slab |
| 9 | F.F |
| 10 | S.F |
| 11 | T.F |
| 12 | R.C.C work with 1:2:4 cement csand and 20 mm dala stone grite complete in all respect. |
| 13 | F.F |
| 14 | S.F |
| 15 | T.F |
| 16 | R.C.C LINTOL |
| 17 | R.C.C work with 1:1.5:3 cement csand and 20 mm dala stone grite 40 mm thickcomplete in all respect. |
| 18 | M-150 brick work in 1:4 cement and csand complet in all respect. For half brick masonary |
| 19 | M-150 brick work in 1:4 cement and csand complet in all respect. HALF brick masonary |
| 20 | G.F |
| 21 | F.F |
| 22 | S.F |
| 23 | T.F |
| 24 | TARRACE FLOOR |
| 25 | M-150 brick work in 1:4 cement and csand complet in all respect.brick masonary |
| 26 | F.F |
| 27 | S.F |
| 28 | T.F |
| 29 | Providing and fixing ISI marked flush door shutters confirming to IS:2202 (Part 1)non decorative type core of block board 35mm thick including ISI marked Stainless steel butt hinges with necessary screws. |
| 30 | Extra for providing lipping with 2nd class tak wood battens 25mm mion all edges of flunium depth of flush door shutter |
| 31 | Providingand fixing aluminium sliding door bots ISI marked anodise not less than grade AC10 tranparent or dyed to required colour or shade with nuts and screws etc. for 0.90 m to 1.00 m wide |
| 32 | 250x16mm |
| 33 | Providingand fixing aluminium sliding door bots ISI marked anodise not less than grade AC10 tranparent or dyed to required colour or shade with nuts and screws etc. for 300m m x 10 mm wide |
| 34 | 200x10mm at centre below handle from inside |
| 35 | Providing and fixing of aluminium handles ISI marked anodised125 mm |
| 36 | mild steel or iron work in heavy sizes such as trusses builts up gates record racks roof work gates etc complete In all respect. |
| 37 | Mild steel or iron in plain work such as in reinforcement cement concrete or reinforcement brick work complete in all respect. |
| 38 | Providing and fixing in position sollapsible steel shutterwith vertical channels 20x 10 x 2mm ( 3/4\" x 3/8\" x 1/12\") and braced with flat iron diagonals 20 x 5mm ( 3/4\" x 3/16\") size with top and bottom rails of T iron 40 x 40 x 6mm ( 1 1/2\" x 1 1/2\" x 1/4\") with 38mm dia steel pulleys with bolts, nuts, locking |
| 39 | Supply and fixing of Rolling shutters ofapproved design made of 80 x 125mm (3\" x 18 gauge) cold rolled ms lath inter locked throughout their entire length and jointed together at the end by end locks and mounted on specially designed pipe shaft with brackets , side guides and arrangements for inside and outside poking complete in all respect. |
| 40 | Providing and fixing MS Tubular frames for doors, windows, ventilatorsand cupboards with rectangular. L typesections, made of 1.60mm thick MS sheetjoints mitred, welded and grinded finish,with profiles of required size including (total 50 door chaukhats at an averageweight of 30 kg per chaukhat)= 1500 kg Fixing with 15 x 3mm lugs 10cm long embedded in cement concrete block 15 x 10 x 10 cm of CC 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size) |
| 41 | Providing and laying water proofing treatmentin sunken portion of WCs, bathroom etc by applying cement slurry mixed with water proofing cement compound consisting of be allowed to air cure for 4 hours followedapplying a. First layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing compound @ 0.253 kg/ sqm . This layer shall be allowed to air cure for 4 hoursb . Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed |
| 42 | 12mm thick plaster with cement mortar consisting of 1 part cement and 4 parts of approved coarse sand (of 1.25 fineness modulous). Minimum thickness to be notess than 10m. Including supply of all |
| 43 | 12 mm thick plaster with cement mortarconsisting of 1 part cement and 3 part of approved coarse sand.Minimum thickness not to be less than 10mm. Including supply of all materials, labour and T and P etc. |
| 44 | Add for extra labour and material for plaster over rough face of one brick wall |
| 45 | Making grooves 10 to 12mm wide x 8mmdeep in plaster of the wall or in ceiling vertically or horizontally as required. |
| 46 | 20mm cement plaster in two coats(for basement wall) backing coat of 17mm and finishing coat of 3mm thick of neat cement or cement and marble dust in ratio 3:1 on rough side of single or half brickwall for interior plastering upto floor two level including arises, internal rounded anglenot exceeding 80mm in girth and finish edeven and smooth.1cement : 3 coarse sand |
| 47 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make , in all colours, shades white cement mixed with pigment of except burgundy, bottle green, black of any size as approved by Engineer in charge , in skirting, risers of steps and dados over 12mm thick bed of ement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in complete in all respect. |
| 48 | Providing and laying rectified Glazed ceramic floor tiles of size 300 x 300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours white, ivory, grey fume red brown, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. |
| 49 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make, in all colours and shades, laid on 20mm thick cementmortar 1:4 ( 1 cement : 4 coarse sand) size of tile 600 x 600 mm |
| 50 | Providing and laying Vitrified tiles indifferent sizes, (thickness to be specified by manufacturer) with water absorption less than 0.08%and conforming to Is:15622 of approved make in all colours and shade , in skirting, risers of steps,over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) joiinting with grey cement slurry @ 3.3kg/ sqm including |
| 51 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand) laid and jointed with cement slurry |
| 52 | (As per above except colour ) Polished Granite stone slab of all colour and texture except black, cherry/ ruby red |
| 53 | Providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels plates etc. including welding, grinding, buffing, polishing, and making curvature wherever required, and fitting the same woth necessary stainless steel nuts and bolts complete i/c fixing the railing with necessaryaccessories and stainless steel dash |
| 54 | Chequered precast cement concrete tiles 22mm thick in footpath and courtyard with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 55 | Providing and applying white cement based putty of average thickness of 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. |
| 56 | One priming coat of cement primer and one coat oil distemper on new work including supply of all materials, labour and tools and plants etc. required for proper ompletion of the work. |
| 57 | As in item 33 above but for every coat after the first coat. |
| 58 | Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade New work (two or more coats applied @ 1.43 litres/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 59 | Painting roofs or other iron work in large areas with one coat of ready mixed paint primer and one coat of approved paint (British, Anisole or equivalent) including supply of all materials, labour and T and P etc. required for proper completion of the work. Paint to be used should confirm to |
| 60 | Painting with valsper or other approved high grade enamel complete one coat over previously painted surface including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Enamel to be used should confirm to |
| 61 | Painting or varnishing new iron work in small areas or new wood with one coat (upto one sqm) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic enamel paint of approved brand such as British paint, Shalimar, Asian or equivalent as approved by E/I) or varnish including supply of all materials, labour, |
| 62 | As in item no. 38 above but for every coat after the first coat |
| 63 | Providing and fixng factory made UPVC wihite colour fixed glazed windows/ ventilators comprising of UPVC multi chambered frame and mullion (wherever required) extruded profiles duly reinforced with1.60 + /-0.2mm thick galvanized mild steel section made from roll forming process of required length shape and size according to UPVC profile upvc extruded glazing beads of appropriatedimension, EPDM gasket GI fastners 100 x 8mm size for fixingframe to finished hardware and drainage of water etc After fixing the gap between frame andadjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality all complete as per approveddrawing and direction of Engineer in charge (single/ double glass panes and silicon sealant shall be paid seprarately) Fixed window / ventilator made of (small series) frame 47 x 50mm and mullion 47 x 68mm both having wall thickness of 1.9 + / - 0.2mm and single glazing bead of appropriate dimension |
| 64 | Providing and fixing factory made upvc white colour sliding glazed window upto 1.50m in height dimensions comprising of upvc multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 + /- 0.2mm thick galvanized mild steel section made from roll forming process of required length shape and size according to upvc profile. appropriate dimension of upvc extruded glazing beads and upvc extruded interlocksepdm gasket , wool pile, zinc alloy white powder coated touch locks with hook, sinc alloy body with single nylon rollers (weight bearing capacity of 40kg) gi fastners, 100 x 8mm |
| 65 | (rest as per above but for larger area) Two track two panels sliding window made of (big series) frame 67 x 50mm and sash 46 x 62mm both having wall thickness of 2.3 + / - 0.2mm and single glazing bead/ double glazing bead of appropriate dimension (area of window above 1.75 sqm upto 2.50 sqm) |
| 66 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows an clerestorey windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick.Float glass panels 5mm thick glass panels (weight not less than 12.50 kg/ sqm) |
| 67 | Providing and fixing stainless steel (ss 304) grade friction hinges to the side/ top hung UPVC windows of approved quality with necessary stainless steel screws etc as per directions of Engineer in charge. 200 x 19 x 1.9mm |
| 68 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for upvc casement window with necessary screws etc.complete. |
| 69 | Filling the gap in between upvc frame and adjacent rcc/ brick/ stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer in charge complete Upto 5mm depth and 5mm width. |
| 70 | Aluminium framing for Aluminium Composite Material Cladding all complete.Providing and supplying aluminium extruded tubular and other aluminiuim sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 Y5 or T6 as per BS 1474, including super durable powder coating of 60- 80 microns conforming to AAMA2604 of required colour and shade as approved by the Engineer in charge (The item includes cost of material such as cleats, sleeves, |
| 71 | Designing, fabricating, testing , installing nd fixing in position Curtain wall with Aluminium Composite Panel cladding with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels including.Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as equired, proper drainage of water to make it watertight including checking of all the structural and functional design. |
| 72 | Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of the following operations |
| 73 | CONSTRUCTION OF R.C.C TANK |
| 74 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 30m. |
| 75 | In all kind of soil upto 1.5m to 3.0m. depth |
| 76 | In all kind of soil upto 3.0m to 4.5m. Depth |
| 77 | In all kind of soil upto 4.5 m to 6.0m. Depth |
| 78 | Providing and laying in cement concrete 1:4:8 (1 cement :2 coarse sand :4 graded Stone asize) and curing complete,including cost of form- work,in foundation and floors. |
| 79 | Reinforcement cement concrete work in RCC culvert slab with 1:2:4 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. |
| 80 | Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 81 | SUB HEAD-I-SANITARY INSTALLATIONS |
| 82 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 83 | Providing and fixing white vitreous chinaextended wall mounting type water closet of size 780x370x690 mm of approved shape including providing & fixing white viterous china cistern with dual flush fittings of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) includung seat cover & cistern fittings nuts , bolts and gaskets etc complete. C.P. brass |
| 84 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 85 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm witha single 15 mm C.P. brass pillar tap |
| 86 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 87 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 88 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 89 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 90 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15 mm nominal bore |
| 91 | Providing and fixing uplasticised PVC connection pipe with brass unions 15 mm nominal bore |
| 92 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting offittings and brackets,cuttingandmakinggoodthe walls wherever required 510x1040 mm bowl depth 200 mm |
| 93 | Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete32mm Dia |
| 94 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore |
| 95 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore |
| 96 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 97 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as perdirection of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 98 | SUB HEAD-II-WATER SUPPLY |
| 99 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Internal Toilet 15 mm nominal outer dia Pipes |
| 100 | 20 mm nominal outer dia Pipes |
| 101 | 25 mm nominal outer dia Pipes |
| 102 | 32 mm nominal outer dia Pipes |
| 103 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal bore |
| 104 | 25 mm nominal bore |
| 105 | 32 mm nominal bore |
| 106 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop & Tank Filling Pipe 50 mm bore |
| 107 | 65 mm nominal bore (i/c two coat of synthetic enamel paint) |
| 108 | Supply, fixing, testing and commissioning of following Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve - IP65CB - 230VAC, as per specifications:- Lehry Make Automatic OHT Level Control System Consist of Following Items 1) LEHRY Make On-Off Type Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve with CI Body & SS Disc 2) Level Float Switch- 5M 3) Control Box (a) IP 65 Finishing(250 x 160 x 115)mm (b) LED Lamps: Tank FULL, Tank EMPTY, Power (c) Power supply toggle switch (d) Accepts 230V Single Phase power supply and provides 24VAC to float switch and 230VAC to valve coil. (e) Accepts NO/NC feedback from float switch. 65mm |
| 109 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work50mm diameter pipe |
| 110 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 111 | 50 to 80 mm nominal bore |
| 112 | Providing and fixing brass stop cock of approved quality : For Internal Toilet 20 mm nominal bore |
| 113 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain 20 mm nominal bore |
| 114 | 25 mm nominal bore |
| 115 | 32 mm nominal bore |
| 116 | 50 mm nominal bore |
| 117 | 65 mm nominal bore |
| 118 | Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mmof suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 25mm dia. |
| 119 | 50mm dia. |
| 120 | 65mm dia. |
| 121 | 80 mm dia. |
| 122 | 100mm dia. |
| 123 | 150mm dia. |
| 124 | 200mm dia. |
| 125 | SUB HEAD : III - ROOFING |
| 126 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia (for rain water) |
| 127 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointingwithsealringconformingtoIS: 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 110 mm dia |
| 128 | Single tee with door 110x110x110 mm |
| 129 | Plain bend 87.5 deg 10 mm dia |
| 130 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia |
| 131 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 132 | SUB HEAD : IV - INTERNAL DRAINAGE |
| 133 | Providing, fixing, jointing and testing,uPVCSWR pipes, - type B conforming to IS : 13592to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. Internal Toilet (Soil & Waste Pipe) 75 MM |
| 134 | 100mm dia. |
| 135 | Exposed on Wall (Soil & Waste Pipe) 110 mm |
| 136 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (87.5°) 110mm bend |
| 137 | Bend without door (45°) |
| 138 | 100mm |
| 139 | Y\" Fitting without door 100mm |
| 140 | 75 mm |
| 141 | Reduced \"Y\" Fitting without door 100mm x 75mm |
| 142 | Single Tee without door 100mm |
| 143 | 75 mm |
| 144 | Single Tee with door 100mm |
| 145 | Reduced Tee with door 110mm x 75mm |
| 146 | Coupler 110mm |
| 147 | Clean Out Plug (COP) 110 mm |
| 148 | 75 mm |
| 149 | Vent Cowl 110 mm |
| 150 | Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc For Wash basin & Urinal 50m dia pipe |
| 151 | 32 mm dia pipe |
| 152 | Elbow (90°) 50mm |
| 153 | 32mm |
| 154 | Elbow (45°) 50 mm |
| 155 | 32 mm |
| 156 | T fitting50mm |
| 157 | 32 mm |
| 158 | Providing, fixing, jointing and testing ,ofPVC Multi Floor Trap without jali ofminimum 50 mm water seal, making necessarycuttingin slabor floors and making goodincluding supports with cement concrete 1:3:6complete as approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet) |
| 159 | Providing, fixing, jointing and testing , ofPVC NahaniTrap without jali ofminimum 50 mm water seal, making necessarycuttingin slabor floors and making goodincluding supports with cement concrete 1:3:6complete as approved by Engineer-in-Charge. 110mm x 75mm (Toilet) |
| 160 | 110mm x 75mm (Kitchen) |
| 161 | Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid Rectangular type with openable circular lid |
| 162 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100mm size P-typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 163 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: 100 mm diameter |
| 164 | Excavating trenches of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m ncluding getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. All kind of soil Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia. |
| 165 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W.pipes including bed concrete as per standard design: 100mm dia SWpipe |
| 166 | COST OF SEWERAGE WORKS |
| 167 | Excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.up to 1.50 m depth Pipes 80 mm to 300 mmdiameter |
| 168 | Opentimbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter |
| 169 | Providing and laying NonpressureNP 2 class (light duty) RCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : 2 finesand ) includingtestingof joints etc. complete. 150 mm.dia. RCCPipes |
| 170 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm.dia. RCCPipes |
| 171 | Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). (i) For Sewer Line |
| 172 | Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 173 | Inside size 90x120cms and 90cms deep including CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg). With common burnt clay FPS (non modular) bricks of class designation 75 (i) For Sewer Line |
| 174 | Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5 |
| 175 | Providing orange colour safety footrests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture\"s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 176 | COST OF EXTERNAL WATER SUPPLY WORKS |
| 177 | Providing & fixing G.I. pipes complete with G.I. fittings includingtenching and refilling etc. (external work) 65mm nominal bore. |
| 178 | Supplying and fixing of specials for pressure pipe 10 % |
| 179 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 65 mm nominal bore |
| 180 | Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 181 | Supply, Installation, testing & commissioning of Vertical in line pumping setcomplete. The rate shall include the cost of electrical panel and piping work complete Domestic Water Supply pumps : Capacity/Flow Rate - 12.5 m3/hr Head- 45 mLocation-1 set in UGT (1 set = 2nos(1W+1S)) |
| 182 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 183 | Supply, fixing, testing and commissioning of Level Float Switch, for dry run protection of pump as per specifications:- Size 5 Mtr, Item Code (LIV-LFV-RED- MTR)(location : UG TANK) |
| 184 | RAIN WATER HARVESTING |
| 185 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 30m. In all kind of soil upto 1.5m depth |
| 186 | In all kind of soil upto 1.5m to 3.0m. depth |
| 187 | In all kind of soil upto 3.0m to 4.5m. Depth |
| 188 | In all kind of soil upto 4.5 m to 6.0m. Depth |
| 189 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 190 | Class M-150 brick work in 1:4 cement coarse sand mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 191 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. |
| 192 | Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 193 | 12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand) |
| 194 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar |
| 195 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter |
| 196 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually. |
| 197 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 198 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for all leads& lifts, all complete as per direction of Engineer-in-charge. |
| 199 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge. |
| 200 | Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading& sizes as per actual requirement, all complete as per direction ofEngineer-in-charge. |
| 201 | DESILTING CHAMBER |
| 202 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. |
| 203 | In all kind of soil upto 1.5m to 3.0m. Depth |
| 204 | Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 205 | Class M-150 brick work in 1:4 cement coarse sand mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 206 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. |
| 207 | Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 208 | 12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand) |
| 209 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar |
| 210 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter |
| 211 | DRAINAGE NETWORK |
| 212 | Excavating trenches in all kinds ofsoil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. Pipes 80 mm to 300 mmdiameter |
| 213 | Providing and laying NonpressureNP 2 class (light duty) RCC pipe with collars jointed withstiffmixtureofcement mortar in the proportion of 1:2 (1cement : 2 finesand ) includingtestingof joints etc. complete. 150 mm.dia. RCCPipes |
| 214 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design |
| 215 | a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. |
| 216 | Supply, installing, testing and commissioning of non clog submersible type drainage / dewatering pumpset Product Type: SUBMERSIBLE DRAINAGE PUMPProduct ConfigurationPump Classification: Standard PumpComponent MaterialsVolute Material: Cast Iron FG 260Impeller Material: Cast Iron FG 260Shaft Material: S.S AISI 410Seal Material: Carbon/Ceramic/NBR/S.S 304Motor SpecificationsPhase: 3Voltage: 380-415VCable Length: Standard - 5 metresCable Length: Additional - 0 metres: 0Pipework ConnectionFloat Switch: With Float SwitchSolids Diameter LimitMaximum Solids Diameter: 10 mm Flow Rate = 205 LPM Each Pump Head = 9m Each Pump Set Detail = 1W+1S ( 1No. for UGT & 1 No. in basement) |
| 217 | Constructing brick masonary open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: |
| 218 | SEPTIC TANK & SOAK PIT |
| 219 | Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 1.5m depth |
| 220 | n all kind of soil upto 1.5m to 3.0m. Depth |
| 221 | In all kind of soil upto 3.0m to 4.5m. Depth |
| 222 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20mm nominal size) |
| 223 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) |
| 224 | Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement. |
| 225 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor |
| 226 | 12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand) |
| 227 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. |
| 228 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. |
| 229 | Providing & fixing 75mm dia vent pipes. |
| 230 | Providing & fixing of 75mm dia cast iron terminal guard. |
| 231 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter |
| 232 | M.D. -2.5- Circular shape 450mm internal diameter |
| 233 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. |
| 234 | CONSTRUCTIONOFTUBEWELL |
| 235 | Drilling of 200 mm dia bore hole. |
| 236 | Supply of 125 mm dia MSpipe as per IS1239 |
| 237 | Supply of 125 mm dia slotted MSpipe |
| 238 | Supply and fixing of nylon jali around the slotted pipes |
| 239 | Providing and packing of coarse sand / pea gravel around the pipe (7.44 Cum) |
| 240 | Transport of boring tools other required equipements and |
| 241 | Supply of submersible pump of make KSB (Cora) for 200 lit/min discharge at 50 meter head with control panel, support wire etc |
| 242 | Providing/inst. Of copper multistand PVC insulated FR cable suitable for submersible pump. (from Starter panel to submersible pump) 3 core copper cable |
| 243 | Providing and fixing 65 mm dia. G.I. pipe complete with fittings and clamps including cutting and making good the wall etc. (from submersible pump to ground level) |
| 244 | Providing and fixing 65 mm dia. brass gate valve with CI wheel of approved quality. |
| 245 | Lowering of 125 mm dia MS pipe in bore hole including cutting,jointing etc complete. |
| 246 | Supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respect. |
| 247 | Fixing, testing and commissioning for erection and lowering of submersible pump, 65 mm dia GI column pipe, 3 core submersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the |
| 248 | Testing and development of tube well. |
| 249 | GST |
