Construction of tube well pumping plant & Pump House for 300*200 mm tubewell at ward 17 kashiram avash yojna sikarpur road - Drilling of borehole for Tubewell contruction by RCRig Machine including transportation, erection,dismantling of Rig and assoiated T & P complete inall respect including required all material, labouretc. 2 Transportation, Erection and Dismantling of Rig Machine 3 Drilling of 675 mm size bore from GL to 45 BGL 4 Drilling of 600mm size bore from 45M BGL to 100MBGL 5 Drilling of 600mm size bore from 100M BGL to 150MBGL 6 Tubewell Assembly M.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. As required & as per typed design complete in all respect 7 300 mm. Dia MS ERW Housing/ casing pipe having wall thickness of 7.1mm. 8 200 mm. Dia MS ERW slotted/ casing pipe having wall thickness of 7.1mm. 9 Supply of pea gravel 10 Logging of bore hole by departmental / approved electric logger 11 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect 12 Lowering of 300mm dia pipe from GL to 42m deep BGL. 13 Lowering of 200 mm dia pipe from 42 to 100mdeep BGL 14 Lowering of 200 mm dia pipe from 100 to 135m deep BGL 15 Development of Tubewell by compressor 16 Transportation, Installation and Dismantling of 250 PSI Compressor 17 Development of Tubewell by 600 PSI Capacity Air compressor 18 Development of Tubewell by O.P. unit 19 Transportation, Installation and Dismantling of 1 Cusec O.P. Unit & Yield Test 20 Development of Tubewell by 600 PSI Capacity Air compressor 21 Chemical and Bacterological test of water sample from depaprtmental/ approved lab 22 Water arrangement for construction ofT.W 23 Provision of temporary fencing baricating at T.W site 24 Site Clearance after completion of T.W & cutting,welding of well cap after development and earth filling in water pits 25 PUMPING PLANT FOR 300*200 MM TUBEWELL 26 Switch gear panel for 40 HP along with cubical panel, star delta automatic starter , power wring and earthing material,Earthing,Painting ,Toolset, r,Wiring of pumphouse internal & external, ChainpulleyBlock and all Pumping Plant accessories with nut bolts andRubber packing etc.complete in all respect with all requiredmaterial, T&P labour etc., dozzing plant. complete in all respect 27 submersible pump set of 1500 LPM dishcharge 45mtr. Headcompleate with 40Hp electric motor 28 Motor operated Actuators with Sluice valve of size 150 mm. at Main line and Bye-pass line as well. 29 3 Mtr. long heavy duty size 150mm dia column pipe same as above spare.( 01 No. set has 02 nos. column pipes 30 Supply & Fixing of riflex valve (6) C.I including all competion of work. 31 Supply and Laying 150mm (6) M.S pipe with lowering, flenge, paking seat etc. including all completion of work 32 Supply and Laying submersibble cable-10mm2 , 3 core 33 Cost for shifting and subsequent erection of scada system with fixing offlow meter,power wiringetc. with connected material from old tubewell to location of rebore tubewell complete 34 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank 35 Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50m & lead up to 50m, refilling, watering and ramming of evcavated earth into the trenches or space betwwen the building and sides of foundation trenches or into the plinth and disposal of surplus earth up to the distance of 50m from the center of the foundation trenches. 36 Concretewith40mmgauge brick ballast,local sand and cement in proportion in 12:6:1 in foundation including supply of all material, labour T&P etc. required for proper completion of work. 37 Ist.Classbrickworkin1:4cement andlocalmortarinfoundationandplinth including supply of all material,labour T & P etc. required for proper completion of work. 38 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Beam S.I. No. 285 (a) 39 Ist.Classbrickworkin1:4cement andlocalmortarinfoundationandplinth including supply of all material,labour T & P etc. required for proper completion of work. 40 Supply and fixing of M.S. angle iron chaukhats of 40mmx40mmx5mm with M.S. sheet door shutter including simple moulding straightg work as in chaukhats and also supply of all material, labour T&P etc. required for proper completion of work. 41 R.C.C. work with cement, coarse sand and 20mm gauge approved stone ballast in proportion of 1:1.5:3 in sunshed and lintel on doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50mm thick binding wire and the cost of binding wire and including necessary centering and shuttering supply of all material, labour T &P etc. required for proper completion of work. 42 M. S. or iron work in plain work such as R.C.C.or R.B. work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work including supply of steel and its wastage. 43 12mm thick plaster with cement and local sand mortar I:6 over brick work minimum thickness not to be less than 10mm including supply of all material, labour T&P etc. required for proper completion of work. 44 Supply and fixing of 50mm wide and 4mm thick glass strips in panels including supply of all material, labour T&P etc. required for proper completion of work. 45 50mm thick 1:1.5:3 plain cement concrete floor with cement coarse sand and 20mm gauge stone ballast laid in pannels finished with 3mm floating coat of neat cement or cement and marble dust in ratio 1:5 as specified and removing any overlaping or mortar at the joints of panels if any and giving them uniform finish including 46 Painting or varnishingnew work or new wood work in smallareas with one priming coat and two coat of approved quality paint or varnish including supply of all material, labour T&P etc. required for proper completion of work. 47 Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.. 48 Finishing walls with water proof cement paint of approved make (Apex painting) and quality on new work with two coats to give an even shade including supply of all material, labour T&P etc required for proper completion of work. 49 Supply and fixing of Girder of 250 mmx125mmsize over the pump house including its painting with approved quality paint and also one priming coat. 50 Sand filling in plinth in pump house and chloronating room including supply of all material, labour T&P etc. required for proper completion of work. 51 Supply cutting and dressing with size and fixing V-Notch of size 90x90cm in the by pass chamber including prepration of by pass chamber as per direction of E/I including supply of all material, labour T&P etc. required for proper completion of work. 52 Mud Faska on R.B. or R.C.C. Roof with 100 mm thick clay layer on roof and laying of tiles and jointing them with cement and sand mortar including supply of all material, labour T&P etc. complete. 53 Supply & Fix 100 mm dia P.V.C. down pipes complete with rose & bend and gratings with M.S. clamps 25X3mm fixed on walls & supply of 150mm long, 6mm dia nails complete. 54 Earth filling in plinth including cartage up to site of work complete. 55 Supply and fixing of inoguration black granite stone padestal i/c grooving matter, b/w, plaster, painting etc all complete work
