|
| 1 | Dismantling posts or struts (wood or R.C.C.) of any section, including taking outembedded in concrete etc. complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work for barbed wirewith old chain link fencing and rolling shutters obtained from withof any description etc. complete all as specified and directed. |
| 3 | Demolition of Brickwork or stone masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed |
| 4 | Demolition ofconcrete (Unreinforced) in ground floors andpavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wellas, ceasaspitas, manholeas, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed. |
| 6 | Returning, filling in, including aspreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed |
| 7 | Removing excavated material n exc. 50m and depoasiting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed |
| 8 | M&L Cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) in foundationas, filling and mass filling and mass concrete complete all as specified and directed |
| 9 | S&F MS TMT Bars of 10 mm dia and over,cut to length,bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and binidingwithand including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified and directed |
| 10 | S&F MS TMT Bars of 6 mmto 8 mm dia and over,cut to length,bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and binidingwithand including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified and directed. |
| 11 | M&L for Pre-cast cement concrete block(Type B1 1:2:4 20mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in mortar complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all asspecified and directed |
| 13 | M&L for preparation of new plastersurfaces of walls including(plastered or unplastered surfaces) and applying two coat of white (lime) wash complete all as specified and directed. |
| 14 | Supply only integral waterproofing compound complete all as specified and directed. |
| 15 | M & L for providing PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, parapets and railing upto 60 cm in height, copings, kerbs, water troughs including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 16 | M&L for Formwork to sides and soffits of floor or lintel beams, haunchings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. including fair finished surfaces complete all as specified and directed. |
| 17 | M&L for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but n exc 10cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work including fair finished surfaces complete all as specified and directed. |
| 18 | Supplying and laying of 110mm PVC pipessingle socketed in any length with rubber ring joints laid fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 19 | M&L Providing precast cementconcrete louvresand jallies,35mm thick (measured solid), including all .mould- ings but excluding frame .Type B0 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 20 | M&L for preparation of steel and iron surface exceedding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed |
| 21 | M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed(300mm in two layers) complete all as specified and directed. |
| 22 | M&L 75mm thick 1:3:6 type C-2,(40mm gradded aggregate) PCC in plinth protectionfinishing cement concrete evenand smooth without using extra cement complete all as specified and directed |
| 23 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 24 | M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 25 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Mirror polishing on Kota stone/ stone work where ever required to give high gloss finishincluding rubbing and mirror polishing complete etc including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 26 | M&L for cement concrete type C2 1:3:6 using 40mm graded stone aggregate 75 mm thick as in flooring etc. complete all as specified and directed. |
| 27 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver blockof M-35 grade with approved colour, design & pattern as in footparth, parks lawns, drive ways or light traffick parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ labying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 28 | M&L for Endura Industrial tiles 10mm thick square/ rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured to match including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 29 | M&L Cement concrete type B-1,1:2:4 (20mm graded aggregate)75 mm thick as flooring complete all specified and directed |
| 30 | M&L for brick work with fly ash bricks straight or curved on plan n exc 6m mean radius built in old size brick in CM 1:6 complete all as specified and directed |
| 31 | M&L Cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) in foundations, filling and mass filling and mass concrete complete all as specified as directed. |
| 32 | M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in drains, surface channels and the like including weathering, slightly rounded or chamferred angles and throating as directed and provision of necessary form work complete all as specified and directed. |
| 33 | Extra over serial item No.31 above for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/slopped ends etc complete all as specified and directed. |
| 34 | M/L MS Framed work as in door or gates of angle /tubular ofIron orother section with guessts plate rails brace,nut boltetc complete confirming to Fe 410 W Gde E Angle Iron frame bar two leafs complete all as specified and directed. |
| 35 | M&L for preparation of oldsteel surfaces of any description not other wise described over 10cm width or girth and applying two coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L for preparation of old surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying two coats of white wash complete all as specified and directed. |
| 37 | M & L for reinforced cement concrete of Type B1 1:2:4 (20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns,columns,beams etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed. |
| 38 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;columns and similar work; vertical or to batter complete all as specified and directed. |
