Bids Are Invited For Conference Table 10 Seater Supplying and placing in position conference table of the following specifications with overall size shall be 3000 X 1150 X 740.Work top--Made of 25mm thick MDF-one side pre-laminate board conforming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Raiser-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. Cutout provision below Access flap at two locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg.HDMI, VGA-A,etc). This product should be certified by GREENGUARD BY UL, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO. 2 1 Conference Table 8 Seater Supplying and placing in position meeting table of the following specifications with overall size shall be 2350 X 1150 X 740.Work top--Made of 25mm thick MDF-one side pre-laminate board conforming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics.The product has a knock-down construction. Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). This product should be certified by GREENGUARD BY UL, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO. 5 2 Workstation Pentagonal * PROVIDING AND PLACING 52.4MM THICK 1200 MM HIGH PANELS IN 1500 Pentagonal workstation WITH COMBINATION OF METAL RACEWAY AT BOTTOM, TWO INTERMEDIATE FABRIC BLOCKS, TOP TILE - FABRIC TACKABLE, WHITE BOARD, FABRIC MAGNETIC. PROVIDING POWDER COATED LEGS. The Workstation consist of Partition 52.4 mm thick shall have panel structure made of 2 Nos., 1.20 mm thick aluminum extrusion vertical trims, 1.20 mm thick aluminum extrusion horizonta trims at every division of tile / block, 1 No. steel component welded structure at bottom, 1 No. aluminum extrusion top trim , 2 Nos., top tiles, blocks at middle, 2 Nos. bottom tiles & connectors to construct different configuration modules. Bottom frame: It comprises of Lchannels made of 2 mm thick CRCA steel, formed plates 3 mm thick HR steel & oval shaped ERW steel tube of 35x15x1.6 mm thick welded together and bolted to uprights with screws. Tiles & Intermediate blocks: Combination of top tiles is Prelam / DL / fabric finish. Bottom tiles are in Prelam / DL finish. Tiles / blocks shall be as follows; i) Laminated tiles are 9mm thick pre-laminated particle board confirming to IS: 12823 having all its edges with 0.50 mm thick PVC edging. ii) Post laminated tiles are 8 mmthick particle board laminated with 0.6 mm thick decorative lamination on one side, 0.60 mm thick balancing lamination on other side with 0.50 mm thick PVC edging. iii) Fabric Magnetic tiles are made of 0.60 mm thick GI, O Grade sheet upholstered with fabric. iv) Fabric Tack tiles are made of 0.60 mm thick GI, O Grade sheet upholstered with PE foam & fabric. v) Metal tiles are made of 0.60 mm thick MS CRCA D- Grade sheet powder coated with epoxy polyester finish. vi) White board tiles are made of 8 mm thick particle board laminated with 0.6 mm thick white glossy high pressure lamination on one side, 0.60 mm thick balancing lamination on other side with 0.50 mm thick PVC edging. vii) Glass tiles are 4 mm thick toughened glass fitted into panels with stiffeners made of 0.60 mm thick powder coated CRCA steel Grade D. viii) Front bottom fixed tiles are made of 1.20 mm thick epoxy polyester powder coated aluminum sheet. ix) Middle segment blocks are made of 38 mm thick paper honeycomb with 3mm thick MDF & 0.60 mm decorative laminate / fabric on each side These tiles shall be supported from top & bottom with clips made from PP co polymer fitted in horizontal extrusion. Panel Legs: Legs shall be made of MS powder coated 38 x 25 x 1.6 mm ERW tube welded with MS base plate of 35 x22 x5 mm over which M8 leveler is fitted for adjustment of height. Wire management: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried up to the panels through concealed conduits inside a the blocks complete as per guiding image, manufacturer’s specification and direction of Engineer - in- charge.Product must be GREENGUARD BY UL Certified by Underwriter Labs. Product must be Indoor Air Quality Certified by Authorised Agency . Product must be GRIHA Certified by Ministry of New and Renewable Energy & Govt of India.. Product must be GreenPro Certified by Confederation of Indian Industries. Product must be BIFMA LEVEL Certified. 6 7 Workstation Rectangular * PROVIDING AND PLACING 52.4MM THICK 1200 MM HIGH PANELS IN 1500 Rectangualar workstation WITH COMBINATION OF METAL RACEWAY AT BOTTOM, TWO INTERMEDIATE FABRIC BLOCKS, TOP TILE - FABRIC TACKABLE, WHITE BOARD, FABRIC MAGNETIC. PROVIDING POWDER COATED LEGS. The Workstation consist of Partition 52.4 mm thick shall have panel structure made of 2 Nos., 1.20 mm thick aluminum extrusion vertical trims, 1.20 mm thick aluminum extrusion horizonta trims at every division of tile / block, 1 No. steel component welded structure at bottom, 1 No. aluminum extrusion top trim , 2 Nos., top tiles, blocks at middle, 2 Nos. bottom tiles & connectors to construct different configuration modules. Bottom frame: It comprises of Lchannels made of 2 mm thick CRCA steel, formed plates 3 mm thick HR steel & oval shaped ERW steel tube of 35x15x1.6 mm thick welded together and bolted to uprights with screws. Tiles & Intermediate blocks: Combination of top tiles is Prelam / DL / fabric finish. Bottom tiles are in Prelam / DL finish. Tiles / blocks shall be as follows; i) Laminated tiles are 9mm thick pre-laminated particle board confirming to IS: 12823 having all its edges with 0.50 mm thick PVC edging. ii) Post laminated tiles are 8 mmthick particle board laminated with 0.6 mm thick decorative lamination on one side, 0.60 mm thick balancing lamination on other side with 0.50 mm thick PVC edging. iii) Fabric Magnetic tiles are made of 0.60 mm thick GI, O Grade sheet upholstered with fabric. iv) Fabric Tack tiles are made of 0.60 mm thick GI, O Grade sheet upholstered with PE foam & fabric. v) Metal tiles are made of 0.60 mm thick MS CRCA D- Grade sheet powder coated with epoxy polyester finish. vi) White board tiles are made of 8 mm thick particle board laminated with 0.6 mm thick white glossy high pressure lamination on one side, 0.60 mm thick balancing lamination on other side with 0.50 mm thick PVC edging. vii) Glass tiles are 4 mm thick toughened glass fitted into panels with stiffeners made of 0.60 mm thick powder coated CRCA steel Grade D. viii) Front bottom fixed tiles are made of 1.20 mm thick epoxy polyester powder coated aluminum sheet. ix) Middle segment blocks are made of 38 mm thick paper honeycomb with 3mm thick MDF & 0.60 mm decorative laminate / fabric on each side These tiles shall be supported from top & bottom with clips made from PP co polymer fitted in horizontal extrusion. Panel Legs: Legs shall be made of MS powder coated 38 x 25 x 1.6 mm ERW tube welded with MS base plate of 35 x22 x5 mm over which M8 leveler is fitted for adjustment of height. Wire management: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried up to the panels through concealed conduits inside a the blocks complete as per guiding image, manufacturer’s specification and direction of Engineer - in- charge.Product must be GREENGUARD BY UL Certified by Underwriter Labs. Product must be Indoor Air Quality Certified by Authorised Agency . Product must be GRIHA Certified by Ministry of New and Renewable Energy & Govt of India.. Product must be GreenPro Certified by Confederation of Indian Industries. Product must be BIFMA LEVEL Certified Supplying and placing in position office table of the following specifications. 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position This product should be certified by GREENGUARD BY UL, Indoor Advantage GOLD & GREEN PRO.Supplying and placing in position office table of the following specifications. 1200W X 600D X 750H Worktop-Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members-Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position This product should be certified by GREENGUARD BY UL, Indoor Advantage GOLD & GREEN PRO. 3 Table 1200W 4 Reception Table Supplying and placing in position Reception table of the following specifications. Work Surface - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap along with a Grommet is provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cut out provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Length - 2400mm Depth - 870mm Height - 1080mm This product should be certified by GREENGUARD BY UL & Indoor Advantage GOLD. 1 2 s QTY PRODUCT NAME MODEL NAME & DESCRIPTION PRODUCT IMAGE Internal# 7 2 Sr Table Supplying and placing in position Main Table with ERU of the following specifications. Its size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. 8 1 Coffee Table Overall Size : W x D x H - 1202 x 594 x 411mm Body: All panels are made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Four nylon bushes are provided. Top: It has top surfaces made of glass & PLT panel. 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with side vertical panels to open upwards. Construction: Knock-down. . Finish: PLT panels are in WENGE shade having SUEDE finish. UV guled plates under glass have SUNRAY finish. Hardware: Dowels for knockdown assembly with high quality standard hardware like screw, door hinges, bumpers, expanding sockets, nylon bushes etc. 9 Chair with Headrest Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9 cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features 360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable sit angle to the chair Seat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron) HEADREST The Headrest sub-assembly is made up of injection moulded glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it is assembled over GRETA 20F The complete headrest assembly is retro fic to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitchcenter dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm DEPTH (D) - 76.0cm HEIGHT (H) - 114.0 cm- 123.5cm SEAT HEIGHT - 43.5 - 54.0cm This product should be certified by Indoor Advantage GOLD, GREENGUARD BY UL GOLD, BIFMA LEVEL 2 & GREENPRO. 10 Visitor Chair Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. • Tilt tension adjustment. . PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. This product should be certified by Indoor Advantage GOLD & GREEN PRO. 3 6 11 Conference Room Chair Providing, supplying and placing of Mid Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. * SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D) * BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS : The adjustable armrest is designed with the following features : • Up-Down adjustment- 8 steps (8 0±0.Scm range) • Height adjustable armrest structure which is Powder Coated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°. Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1± 0.5 cm. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. This product should be certified by Indoor Advantage GOLD, BIFMA Level 2 & GREEN PRO. 18 Internal# 15 1 Medium Storage 900 W x 1327 H Providing, assembling& placing in Half height Storages in Hinge door with following specs : STACKABILITY / REVERSIBILITY /CONNECTIVITY :Units should able to be stacked with any of the range of storages of same make Unit can be stacked such that its front door is opposite to that of other units.End units with shared units inbetween can be joined/ stacked adjacent to each other. The leg of units should be matchable with Cubicle system item no. 2.0-2.1 including the the Skirting units should also be connectable. CONSTRUCTION & MATERIALConstruction is a knockdown construction of 25mm thk and 18mm thk Pre-Laminated boards with metal cladding of 0.8mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with Epoxy polyster powder of 50±10 microns thickness. TOP - 4.0feet and 4.5feet height Storage units are provided with 11mm thk bent metal tops made of 0.8mm thk C.R.C.A (as per IS:513). The metal tops are coated with Epoxy polyester powder of 50± 10 microns thickness. DOOR & DOOR OPENING- two door opening for all other width options.The doors are made of 18mm thk Pre-laminated boards with decorative laminate on one side and backing laminate on the other side. SHELVING-Height wise adjustile shelf mounting holes provided on side panels for easy interchange of shelf heihjt as required. Fixed shelves along with adjustable shelves provided only in case of 4.0 feet height units. No fixed shelves for 2.5 feet height storage units. 1 No adjustable sheif for 2.5 feet /4.0 feet/4.5 feet height without vertical partition for 450/600/650/750/800/900w whereas 2 No adjustable shelves for 2.5 feet/ height with vertical partition in between for 950w & above. Uniformly distributed load capacity for each shelf is 40kg maximum. SKIRTING OPTION-The skirting unots are provided with 150mm high skirting made of 0.8mm thick C.R.C.A(as per IS:513) and is coated with Eoxypolyster powder of 50+-10 micros thickness. LEVELER-Screw type adjustable leverer with plastic base provides vertical adjustment for floor unevness and leveling of units. BACK PANELS-Back panels are made of 18mm thick pre-laminated boards with options of decorative as well as fabric finishes. 4.0 height units consist of split back top panel and split back bottom panels separated by an Aluminimum extrusion. LOCKING MECHANISM-3-way nickel plated wooden furniture lock is provided for effective and positive locking of doors. HANDLE-Aesthetically appealing recessed handles of Aluminium extrusion are provided for easy opening and closing. The Storages should satisfy and merge with Cubicles as per given specification above as per guiding image, manufacturer’s 16 1 SH-III (Audio Video System) 17 8 SH-III (Audio Video System) 18 3 SH-III (Audio Video System) 19 8 SH-III (Audio Video System) Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glassfilled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 3.0 ±0.1 cm. * Mesh Back Size : 45.5 cm. (W) x 54.0 cm. (H) * Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The S shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. . ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors. TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm wheel diameter and assembled to the pedestal. This product should be certified by Indoor Advantage GOLD, GREENGUARD BY UL GOLD, BIFMA Level 2 & GREEN PRO. 12 9 Staff Chair 13 3 Seater Sofa Dimensions W x H x D (cm)-201 x 84.5 x 87.5 · Understructure: Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of cross sections 22x64mm and 34x64mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching Zig-Zag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2 Seater and 3 Seater for additional strength and rigidity. · Foam: Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. A top layer of supersoft PU foam with density 32 kg/m3 is used to provide softness. Armrest : (1 Seater, 2 Seater, 3 Seater) · Understructure: Understructure of armrest is made up of combination of pinewood members,12mm thick Plywood, 3mm thick MDF and 2mm thick cardboard. Pinewood are of cross sections 25x25mm and 16x35mm without having major knots & defects on the surface. Complete understructure of Armrest is made by gluing, nailing & stapling. · Foam: Foaming of Armrest is done with density 32g/m3 on all the outer surfaces in order to give definition to the form of armrest.Foam of 28kg/m3 is used on the rectangular top surface of armrest. Backrest : (1 Seater, 2 Seater, 3 Seater) · Understructure: Understructure is made up of combination of pinewood members, 12mm THK Plywood and 3mm thick MDF panels. Pinewood are of cross sections 16x35, 16x74mm without having major knots & defects on the surface. Non-woven of 100GSM is stapled on the rear side of the backrest. · Foam: Backrest is made of PU foam with density 60 kg/m3. . Cushion :(1 Seater, 2 Seater, 3 Seater) Cushion is made up of loose recron filled in White non-woven bag. This stitched non-woven bag is kept inside the upholstery cover of cushion pillow. .Upholstery: A]Complete body of all the SKUs is upholstered with Fabric. B]SIngle fabric variant namely QUEENS is used C]Complete sofa is uplholstered with woven fabric [ELASTRON - QUEENS] which has the following colour options: 1.BOARDEAUX 2.BLACK .Legs: Rubberwood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU BLACK COAT [matt finish]. Option of Plastic injection moulded leg to be introduced with M8 steel stud to get more sturdiness and better durability. Assembly: Upholstered seat ,backrest and armrest are integral part of each other and are connected to each other with M8 bolts, nuts & washer. .Packet: Each packet of 1 seater consists of one complete upholstered sofa ,provided with 4 legs. Each packet of 2 seater consists of one complete upholstered sofa ,provided with 4 legs. Each packet of 3 seater consists of one complete upholstered sofa ,provided with 4 legs. 14 Cupboard 900 W with Wooden Riviera Oak Product Size - 2 Doors (LH and RH) for 900W For 900W storage-Each Door width 448W Construction & Material - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990 Soft closing Hinge. Handle - Asthetically appealing handle made of Aluminum Lipping - Lipping 2mm Thk on all edges. Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels (Refer Sheet 4 of 17) Number of files that can be stored in one shelf is as follows: 900 w = 10 no of files. Product is GREENGUARD BY UL BY UL , IAQ AND GREENPRO BY CII CERTIFIED 1 1 SH-III (Audio Video System) Supply, installation, testing and commissioning of Interactive display with Size:66, having Screen Size 65 , Panel Technology IPS,Aspect Ratio 16 : 9,Native Resolution 3,840 x 2,160 (UHD),Brightness w/o Glass : 390 nit (Max.), Contrast Ratio 1,200:1,Viewing Angle (H x V) 178 x 178,Response Time 8ms (G to G),Operation Hours (Hours / Days) 16/7,Bezel Color Black,Bezel Width (T/R/UB) 15 / 15 / 15 / 44 mm, (Input) Video / Audio :-HDMI (3, HDCP 2.2), RGB (VGA), Audio In, RS-232C In, RJ45 (LAN), USB 3.0 Type A (4), USB 2.0 Type A, USB Type C (USB-PD, DP-Alt)), (Output) Video / Audio :- HDMI Out, Audio Out (1, Optical 1 (SPDIF)), Touch USB (2), RJ45 (LAN), etc as required. ._ Avff-Annw7 (4:4:4), Deep SITC supports signals up to 4K@60Hz (4:414), Deep Color, x.v.ColorT, Lip Sync, 7 1 PCM, Dolby TrueHD, DTS-HD, CEC 24K gold—plated connectors resist corrosionHDMI Compliance HDRHDCP 22E DID and CECMateriali Tinned CoPperlBare Copper CONDUCTORS, Triple shielding, PVC JACKETretc as re•uired. SITC of 4k HDMI AV switcher with Number of Inputs. 4 HDMI . HDMI Input Resolution: Up to 41(x2K@60Hz 4:4:4 .HDMI Standard. 2 0.HDCP Version: 2.2, Number of Outputs. 1 HDMI ,HDMI Output Resolution Up to 4Kx2K©60Hz 4:4:4 ,HDMI Standard: 2.0 HDCP Version: 2 2. Audio Output: 1 AUDIO, Audio Format PCM,Audio Output Impedance 70 Ohms.Frequency Response. 20Hz to 20kHz, ±3dB,Control Interfaces 1 IR IN, 1 RS232, Bandwidth: 18Gbps,Power Consumption 5W Total Quantity : 84
