|
| 1 | E/W in cutting or in embankment in ordinary soil excavation to be in the from of regular pits not be exceeding 0.50 m in depth and earth work in embankment to be in 20 cm. Layers including ramming and dressing the surface to required levels and slop and also including 1.5 m. lift and up to 8 km .SI NO. 253A+261B+231B |
| 2 | Excavation in foundation in ordinary soil(Loam, clay or sand) Including lift upto1.50 M. and lead upto 30 M. and including filling watering and rammind of excacated earth into the treaches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in- charge upto a distance of 30 M. from the foundation trenches.251 A |
| 3 | P.C.C.(1:6:12) cement fine sand and brick Ballast in foundation and under floorsincluding supply of all materials labour tools and plants etc. required for proper completion of the work. s.i no 273 |
| 4 | M 150 (1:4) Brick Work in foundation ,coarse sand including supply of all materials labour T&p etc.required for proper completion of the work . s.i no 305A |
| 5 | As in item 360 above but 2.5 cm thick and of cement concrete consisting of 1 part cement 1 1/2 parts approved coarse sand and 3 parts approved 10mm. Graded stone grit and including water proofing material as ordered by the engineer incharge in the proportion as specified by the manufactures. |
| 6 | M 150 (1:4) Brick Work in super structure ,fine sand including supply of all materials labour T&p etc.required for proper completion of the work . s.i no 307 +309+310 |
| 7 | 12 mm thick plaster (1:3) with cement & coarse sand minimum thickness n-ot to be less than 1 cm including supply of all material labour T&P etc. required for proper completion of the work s.i no 583 |
| 8 | Cement Concrete (1:2:4) with 2cm guage approved stone ballast, Coarse sand & cement in the materials, labour Tools & plants etc. required for proper completion of the work. |
| 9 | R.C.C. Work with cement, approved coarsesand & 2 cm (3/4\") guage approved stone ballast in proportions of 1:1.5:3 in R.C.C,COLUMNexcluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials,labour, tools & plants etc. required for proper completion of the work Excludingcost of binding wire.si no. 288 new item slab |
| 10 | R.C.C. Work with cement, approved coarsesand & 2 cm (3/4\") guage approved stone ballast in proportions of 1:1.5:3 in Ligther beam excluding supply of reinforcement and its bending. But including its fixing and binding wire and including necessary centering and shuttering etc. and supply of all materials,labour, tools & plants etc. required for proper completion of the work Excludingcost of binding wire.si no. 285 |
| 11 | MSTor In plain work such as RCC or R.B. work Including bending forproper shapeand inclu- ding supply of steel and its wastage bend hooks, and authorized overlapping shall be measured and including cost of binding. s.i no 504 |
| 12 | Supply and fixing 6mm. (¼\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete, including supply of all materials, labour and Tools and Plants. |
| 13 | Supply and fixing of kota stone in flooring 20mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. |
| 14 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. |
| 15 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. requied for proper completion of the work.si no. 660+661 |
| 16 | Construction of granular sub base (GSB) by providing coarse grade material spreading in uniform layers with mortar grade on prepared surface mixing by mix in place method with rotavetar at OMGSB/RBM spreaing in uniform layor mortar grader on prepared surface mix in place method with rotavaror at OMC at compacting with vibratory roller to achive the desired complete surface. |
| 17 | Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibrocompression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P(GREY COLOR TILES) |
| 18 | Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibrocompression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P( COLOR TILES) |
| 19 | Supply and fixing vitrified thiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointinf and polishing complete including supply of all materials, labour and T & P complete. |
| 20 | 100 mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plaster with 25mm thick mud mortar mixed with Bhusa at 35 Kgs. Per cum of earth and gobri looping with mix 1:1 (1 clay and 1 cow dungs) and covered with cement mortar 1:3 (1 cement 3 fine sand) and finished neat. |
| 21 | M.S. or iron of heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. includingriviting of welding where necessary . required for proper completion of the work.Si no 503 |
| 22 | Providing and fixing 1mm thick M.S. Sheet garge door with frame of 40x40x6mm (1½\"x12\"x\") angle iron 3.15 mm (1/8\") thick M.S. gusset plate at the junction and comers including supply and fixing of necessary fittings. Lock rail of 15\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. SI NO. 517 (a) Using M.S. angles 40x40x6 mm (1½\"x1\"x\") for diagonal bracings |
| 23 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesal or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-109. |
| 24 | Providing and fixing brass stop cock of approved quality : DSR NO.18.16.115 mm nominal bore |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. DSR 17.7.1 |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :. D.S R NO. 17.2.1 |
| 27 | Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI:12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge |
| 28 | S/F Fan box |
| 29 | S/F Fan |
| 30 | Wiring point for light/fan with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 121(B) |
| 31 | Wiring point for plug with 1sq.mm FRLSH insulateD multistrand single core copper conductor in PVC conduit etc all complete. S.I.NO. 124C |
| 32 | S/F of 0.5 to 5Amp single pole miniature circuit breaker (10KA) C curve etc all complete. S.I.NO. 1001 |
| 33 | Providing and fixing white vitreous china wash basin Hindware Equivalent including making all connections but exvluding the cost of fittings camplete as per direction Engineer-in-charge. |
| 34 | Submersible |
| 35 | GST |
