Construction Of Link Road To Village Jamni To Bhanwar Km 0/0 To 1/700 (Sh:- Providing And Laying Wbm Grading-Iii And 20 Mm Premix Carpet With Priming Coat,Tack Coat, Seal Coat In Km. 0/0 To 0/500). Working Programme 2024-25
Tender Overview
Project Description
Construction of Link road to Village Jamni to Bhanwar Km 0/0 to 1/700 (SH:- Providing and laying WBM Grading-III and 20 mm premix carpet with priming coat,tack coat, seal coat in km. 0/0 to 0/500). Working programme 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting stone aggregates of 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) nominal size to water bound macadam specifications including in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening and binding materials to fillup the interstices of coarse aggregate, watering and compacting to the required density grading-III as per technical specifications clause 405 by manual means including entire carriage of materials within all leads and lifts and other incidentals. |
| 2 | Applying a priming coat with bitumen emulsion (SS-I) at the rate of 0.70 Kg. to 1.0 Kg. (zero pointseven zero toone pointzero kilograme)per square metre on thegranular surface cleaned with hydraulic broom as per Technical specification Clause 502 includinghauling / carriage of material through all modes of trasportation with in all leads and lifts as perdirection of Engineer-in-charge. |
| 3 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.With rapid setting bitumen emulsion On W.B.M / W.M.M. @ 0.4kg/sqm within all leads and lifts and other incidentals and as perdirection of Engineer-in-charge.. |
| 4 | Providing laying and rolling of open graded premix carpet of 20mm (twenty millimetre)thickness composed of 13.2mm to 5.6mm (thirteen point two millimetre to five point six milimetres)crushed stone aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable palnt, laying and rolling with a three wheel 80-100 KN static roller capacity, finished torequired level and grades to be followed by seal coat of type -Bas per technical specification clause 508 by manual meanswith Bitumen (S-90)/VG-10 including hauling/ carriage of material through all modes of transportation within all leads and lifts as per the direction of Engineer-in-charge. |
| 5 | Providing and laying seal coat sealing the voids in a bitumenous surface laid to the specified levels grade and cross fall using type \"B\" as per technical specification clause 510 by manual means (S-90)/VG-10 grade bitumen including hauling/carriage of material through all modes of transportation with in all leads and lifts as per the directionof Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender