Tender For Construction Of Centralised Product Store With Cold Room At Namakkal.
Tender Value
35.40 Lakhs
Estimated cost
Bid Submission
25 Nov 2024
0 days left
EMD
35400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
namakkal → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Centralised Product Store With Cold Room At Namakkal.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantlingof Existing old steel honeycomb plate keeping the debris clearing away and carefully from the site placesincluding cost of all tools etc., completed as directed by departmental officers |
| 2 | Dismantling of dadooing walls in cement mortar in the existing milk reception wall around area etc., completed as directed by the departmental officers. |
| 3 | Dismantling of existing building roof top fully damaged pressed Tiles and Weathering course etc.,Complete and keeping the debris clearing away and carefully from the site placesincluding cost of all tools etc., completed as directed by departmental officers |
| 4 | Dismantling of existing damaged brick work in Cement mortar walls and keeping the debris clearing away and carefully from the site placesincluding cost of all tools etc., Complete as directed by the departmental officers. |
| 5 | Dismantling of existing RCC machinery bed and other bed blocks etc., keeping the clearing away and carefully from the site placesincluding cost of all tools etc., Complete as directed by the departmental officers. |
| 6 | Earth work Excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring, shuttering and baling out water wherever necessary, refilling the sides of foundation with excavated earth in layer of not more than 15cm thick, watered, well rammed, consolidated and depositing the surplus earth on bank with initial lead of 10 mts and initial lift of 2 mts, clearing and leveling the site etc., complete as directed by the departmental officers and as per standard specification. |
| 7 | Supplying and filling with gravel for foundation and basement to required thickness, watered, well rammed and consolidation, etc.,complete as directed by the departmental officers and as per standard specifications. |
| 8 | Supplying and filling with M-sand for foundation and basement to required thickness including watered, well rammed and consolidation etc., complete as directed by the departmental officers and as per standard specifications |
| 9 | Plain Cement Concrete 1:4:8 (One Cement, Four M-Sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including de-watering if found necessary and laid in layers of not more than 15cm thick. for flooring including rendering the top surface including side shuttering if required compaction & curing etc., complete as directed by the departmental officers and as per standard specification. |
| 10 | Brick work in Cement Mortar 1:5 (one part cement and five parts sand) using best quality II class Ground moulded chamber burnt bricks of size 9\" x 4-1/2\" x 3\"to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification.a) Foundation & basement |
| 11 | b) Above basement up to 4.50m ht |
| 12 | c) 4.50m to 9.00m height |
| 13 | Supplying , erection and steel centering for all RCC works using M.S Sheet, M.S. angles casurina props C.W.joints for all type of RCC works (ie) beams, roof slab, lintel, column footing, column & roof beam etc., including necessary supports with all cross bracing, filling the slits and holes the reprieved materials should be taken by the contractor and side shuttering etc., complete as directed by the departmental officers. a) up to basement - Plain surface |
| 14 | b) above basement level 3.30m height - Plain surface |
| 15 | Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge machine crushed hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) etc., complete complying with standard specification and as directed by the departmental officersa) Foundation & basement |
| 16 | b) Above basement up to 4.50m ht |
| 17 | Supplying, fabricating and placing in position of reinforcement, grills for all RCC works including cost of steel and binding wire , cutting and tying etc., completeas directed by the departmental officers.RTS rods in all floors |
| 18 | Providing granolithic floor finish of the 40mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 19 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for the machinery bed and other bed blocks works and flooring including curing (excluding centering) etc., complete as per standard specifications and as directed by the departmental officers. |
| 20 | Supplying and laying of unpolished on both sides machine cut modikuppam Paradise granite slab of size 60x45x3cm laid over a cement mortar 1:3 (One cement and three sand)-20mm thick including conveyance, cutting, laying, curing and pointing the joints with white cement mixed with matching colouring pigments etc., complete as directed by departmental officers. |
| 21 | Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc complete as per standard speicification. |
| 22 | Supplying and laying of Granite Stone Slabs of suitable size of 18/20mm thickness of best quality in Cement mortar 1:2 in all floors including cutting chargers etc., complete complying with standard specifications and as directed by the departmental officers. |
| 23 | Supplying and fixing of steel rolling shutter (pull and push type) with ISI make of approved quality with MS lathes 75mm wide and 18 gauge GI sheet thick to a different sizes including all accessories like sliding groves, shafts, springs, bearings, hood and locking arrangements and grouting the side and top assembly with walls and beams etc. complete and as directed by the departmental officers. |
| 24 | Supplying and fixing of UPVC (Un-Plasticized Polyvinyl Chloride) Casement door of required size single/doubledoor made up of multi chamber section with wall thickness 2mm galvanized steel reinforcement with 1.2mm 100% corrosion free. the outer frame profiles size 60mmx58xx is miter cut at 4corners and joint with plastic fusion welding. the EPDM gasket covered with all the edges of the frame and shutter. the door shutter will be provided with lock set and auto door closer and fitted with imported hardware fittings and EPDM gasket with wall using anchor fasteners and filled with white sealant etc., complete as directed by the departmental officers. |
| 25 | Plastering with cement mortar 1:5 [One part cement and five parts M-sand] 12mm thick including scaffolding, neatly finishing and curing etc., complete as directed by the departmental officers and as per standard specifications.. |
| 26 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick in all floors including scaffolding, neatly finishing and curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 27 | Special(ceiling) plastering and finishing the exposed surface of all RCC items of work etc., with cement mortar 1:3 (One part cement and three parts M-sand) 12mm thick including hacking charges etc., complete as directed by the departmental officers and as per standard specifications. |
| 28 | Painting two coats of Existing Plastered wall surface with ready mixed plastic emulsion paint (Interior) of first class quality and of approved colour, thorough scrapping, clean removal of dirt and necessary plaster of paris putty, wherever required etc., complete as directed by the departmental officers. |
| 29 | Painting two coats of Existing Plastered wall surface with ready mixed plastic emulsion paint (Exterior) of first class quality and of approved colour thorough scrapping, clean removal of dirt and necessary plaster of paris putty, wherever required etc., complete as directed by the departmental officers. |
| 30 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers. |
| 31 | Painting two coats of new iron works using Synthetic Enamel paint of approved quality and colour over the existing red oxide priming coat in all floors including cost of priming coat etc., complete as directed by the departmental officials.(such as steel doors, windows, ventilators, window bars, balustrades ,Grill etc.) |
| 32 | Painting two coats over old iron works such as steel doors, windows, ventilators, window bar balustrades etc., with best approved first quality synthetic enamel paint of approved colour in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification. |
| 33 | Paving the Flooring with ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M-Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. |
| 34 | Dadooing walls with following best approved quality colour glazed ceramic tiles of 300mmx450mmx8mm sizes set in Cement Mortar 1:2 (One Cement and Two m-sand) 10mm thick and pointing the joints with white cement mixed with coloring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 35 | Supplying anf fixing of Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail,Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.(Solid panel PVC door with frame) as directed by the departmental officers. |
| 36 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes 110mm dia having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \"U\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 37 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications etc as directed by the departmental officers. |
| 38 | Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. |
| 39 | Supplying and fixing in marble of 0.61mx1.22m.,18/20mm thick in all floors for urinal partition including conveyance for labour, fixing and polishing chargesetc., complete and as directed by the departmental officers. |
| 40 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) |
AI Tender Summary
Tender Timeline
Nov 07, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 26, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender