|
| 1 | Excavation in trenchesnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed |
| 2 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed |
| 3 | Removing excavated materialsto a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed |
| 4 | M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directedNote: Only punned thickness of sand shall be considered for measurement purposes |
| 5 | Supply and laying burnt bricks of sub-class \"B\" designation 75 laid in trenches for cable protection complete all as specified and as directed |
| 6 | Supplying, laying / fixing, testing and commissioning of electric cable, 1100V grade aluminium conductor XLPE insulated, armoured cables conforming to IS-7098 (Part-I)-1988, stranded, XLPE insulation, PVC tape inner sheath laid in trenches, passing through ducts, etc. fixed on poles, etc. including taking out old damaged cables and disposing off complete all as specified and as directed of the following sizes:Note: Excavation/earthwork, bricks, sand cushioning and GI pipe will be measured and paid separately under respective items herein |
| 7 | 3.5 core 95sqmm |
| 8 | 3.5 core 50sqmm |
| 9 | 3.5 core 35sqmm |
| 10 | Dismantling and removing motor from the existing position, removing the burnt winding and rewinding the motor with super enalled copper winding of same gauge and re-assembling back to the original position, testing and commissioning complete all as specified and as directed for the following capacities pump sets:Note: The ratequoted shall be deemed to be inclusive of cost of dismantling the pump set along with motor, taking to workshop, loading/unloading, carting, etc. as required |
| 11 | 7.5HP, 3 phase,415V |
| 12 | 10HP,3 phase,415V |
| 13 | 15HP,3 phase,415V |
| 14 | 20HP, 3 phase,415V |
| 15 | 25HP, 3 phase,415V |
| 16 | S&F in repairs ball bearing of the following capacities of pump as per site complete all as specified and as directed |
| 17 | 7.5HP, monoblock, Model: 6308-ZN |
| 18 | 10HP, monoblock, Model: 6309-Z |
| 19 | 15HP, monoblock, Model: 6310-Z |
| 20 | 20HP, monoblock, Model: 6311 |
| 21 | 25HP, monoblock pump, Model: 6312 |
| 22 | S&F in repairs cast iron impeller of the following capacities of pump as per site complete all as specified and as directed: |
| 23 | 7.5HP, monoblock, Model: MBN 7.52N |
| 24 | 10HP, monoblock |
| 25 | 15HP, monoblock |
| 26 | 20/25HP, monoblock, Model: KDT 2095/HFAM 391 |
| 27 | M&L for cleaning, preparing external surfaces and painting with one coat of synthetic enamel paint (of approved tint) including painting the base frame and writing SM/MES No. (of approved font) complete all as specified and as directed of following capacities of pump sets: |
| 28 | 7.5HP, monoblock, Model: MBN 7.52N |
| 29 | 10HP, monoblock |
| 30 | 15HP, monoblock |
| 31 | 20/25HP, monoblock |
| 32 | S&F flexible copper cable, single core duly connected with suitable size of copper lugs complete all as specified and as directed of the following sizes: |
| 33 | 6sqmm |
| 34 | 4sqmm |
| 35 | S&F flexible PVC helical pipe 20mm dia complete all as specified and as directed |
| 36 | S&F stainless steel pump shaft suitable for electric driven pump set as per the existing model complete all as specified and as directed for the following capacities of pumps: |
| 37 | 7.5HP |
| 38 | 10HP |
| 39 | 15HP |
| 40 | 20/25HP |
| 41 | S&F in repairs pressure guage 0 to 7kg/sqcm, 96mm dia including making necessary arrangements for fixin and installing complete all as specified and as directed |
| 42 | Maintenance and servicing to DG set of capacity 125KVA, make Kirloskar / Greaves Cotton including attending faults on call basis for normal repairs including replacement of defective and worn out filters, gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and rectifying faults of AMF panels, etc. tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, addingdistilledwater checking the oil, coolant levels complete all as specified and as directedNotes: (i) All items viz. cleaning agent, cotton waste, grease, minor items such as washer, nuts, bolts etc are required for carrying out the normal maintenance of the engine, mechanic charges and any specialized machine work from outside workshop if requred shall be included in the quoted rate.(ii) Fresh engine oil/spare parts for DG sets shall be measured and paid separately under respecitve item (iii) During maintenance/servicing of DG set, complete DG set shall be checked properly and all setting shall be done properly |
| 43 | Notes for item No. 42 contd...(iv) The maintenance/servicing of DG set by authorized service agency of authorised service center of Kirloskar/ Greves Cotton only(v) Servicing shall be carried out after every 500hrs run or after 6months whichever is earlier(vi) Sites shall be at Vairengte/Lailapur/Bhaga(vii) All the above shall be deemed to be included in the quuoted rate and no claim whatsoever shall be entertained |
| 44 | M&L for taking out unseviceable / unrepairable parts from engine with due care, and supply / fix the following new and original spare parts including carrying out all related minor and periodical maintenance and ovehauling works as per site requirement suitable for 125KVA capacity DG set complete all as specified and as directed |
| 45 | Pre-filter Cat Part No: 48.117.04.0.00 |
| 46 | Micro-filter Cat Part No: 48.117.05.0.00 |
| 47 | LO filter element Cat Part No: 06.436.01.0.00 |
| 48 | Air cleaner element Cat Part No: F6.504.08.0.00 |
| 49 | Hose radiator to pump inlet Cat Part No: 6H.057.02.0.00 |
| 50 | Hose thermostat to radiator Cat Part No: 6H.057.01.0.00 |
| 51 | Hose water pump to radiator Cat Part No: 4H.073.02.0.00 |
| 52 | Fuel pipe (4H 03105000) |
| 53 | Fuel leak off pipe (6H 24710000) |
| 54 | Fuel pipe (0885410000) |
| 55 | V-belt Cat Part No: 6H.069.01.0.00 |
| 56 | V-belt Cat Part No: 47.305.01.0.00 |
| 57 | Stop solenoid Cat No- 4H1503000 |
| 58 | Sensor unit for temperature gauge |
| 59 | Door hinges |
| 60 | Maintenance and servicing to DG set of capacity 62.5KVA of makeGreaves Cotton including attending faults on call basis for normal repairs including replacement of defective and worn out filters, gaskets, V- belts, engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolant levels at Bhaga pump house complete all as specified and as directedNotes: (i) All items viz. cleaning agent, cotton waste, grease, minor items such as washer, nuts, bolts etc are required for carrying out the normal maintenance of the engine, mechanic charges and any specialized machine work from outside workshop if requred shall be included in the quoted rate.(ii) Fresh engine oil/spare parts for DG sets shall be measured and paid separately under respecitve item (iii) During maintenance/servicing of DG set, complete DG set shall be checked properly and all setting shall be done properly |
| 61 | Notes for item No. 60 contd...(iv) The maintenance/servicing of DG set by authorized service agency of authorised service center of Kirloskar/ Greves Cotton only(v) Servicing shall be carried out after every 500hrs run or after 6months whichever is earlier(vi) All the above shall be deemed to be included in the quuoted rate and no claim whatsoever shall be entertained |
| 62 | M&L for taking out unseviceable / repairable parts from engine with due care, and supply / fix the following new and original spare parts including carrying out all related minor and periodical maintenance and ovehauling works as per site requirement suitable for 62.5KVA capacity DG set complete all as specified and as directed |
| 63 | Pre-filter |
| 64 | Micro-filter |
| 65 | LO filter element |
| 66 | Air cleaner element Set |
| 67 | Hose water pump to radiator |
| 68 | Fuel pipe (4H 03105000) |
| 69 | Fuel leak off pipe (6H 24710000) |
| 70 | Fuel pipe (0885410000) |
| 71 | V-belt Cat Part No: 47.305.01.0.00 |
| 72 | Stop solenoid |
| 73 | Door hinges |
| 74 | Maintenance and servicing to DG set of capacity 30KVA, make Kirloskar Oil Engine including attending faults on call basis for normal repairs including replacement of defective and worn out filters, gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and rectifying faults of AMF panels, etc. tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, addingdistilledwater checking the oil, coolant levels complete all as specified and as directedNotes: (i) All items viz. cleaning agent, cotton waste, grease, minor items such as washer, nuts, bolts etc are required for carrying out the normal maintenance of the engine, mechanic charges and any specialized machine work from outside workshop if requred shall be included in the quoted rate.(ii) Fresh engine oil/spare parts for DG sets shall be measured and paid separately under respecitve item (iii) During maintenance/servicing of DG set, complete DG set shall be checked properly and all setting shall be done properly |
| 75 | Notes for item No. 74 contd...(iv) The maintenance/servicing of DG set by authorized service agency of authorised service center of Kirloskar/ Greves Cotton only(v) Servicing shall be carried out after every 500hrs run or after 6months whichever is earlier(vi) Sites shall be at Vairengte/Lailapur/Bhaga(vii) All the above shall be deemed to be included in the quuoted rate and no claim whatsoever shall be entertained |
| 76 | M&L for taking out unseviceable / repairable parts from the engine with due care, and supply / fix the following new and original spare parts including carrying out all related minor and periodical maintenance and overhauling works as per site requirement suitable for 30KVA capacity DG set complete all as specified and as directed |
| 77 | Air filter (0458603000) |
| 78 | Lub Oil filter (0643601000) |
| 79 | Pre-filter (4811704000) |
| 80 | Micro filter (4811705000) |
| 81 | Hose (water pump to radiator) (4H07302000) |
| 82 | V-belt (4H06901000) |
| 83 | Fuel pipe (0665410000) |
| 84 | Fuel leak off pipe (4H 24710000) |
| 85 | Fuel Pipe (4H 03105000) |
| 86 | Fuel pipe (4H 0310400) |
| 87 | Water temperature switch (4626001000) |
| 88 | Set of \"O\" rings (4H 08720000) |
| 89 | Set of copper washer (4H08730000) |
| 90 | OFF/ON start switch ( 49135030000) |
| 91 | Sensor unit for temperature gauge (46085020000) |
| 92 | Door hinges |
| 93 | Supply and applying lubricating oil grade 15W40 for DG sets and pump sets of any capacity complete all as specified |
| 94 | Supply and filling coolant for DG sets and pump sets of any capacity complete all as specified |
| 95 | M&L for repair/overhauling of alternator by removing the exciter unit, burnt coil and all other accessories for re-winding of alternator field coil with super enamelled copper winding wire of class \"F\" insulation as per existing size including all associated insulating material such as separator, etc. and varnishing, heating including dismantling of alternator and all internal connection and taking out the core with proper care and re-insulation after rewinding work including all internal connections, etc. complete all as specified and as directed for the following capacities of DG sets of any make:Notes: The quoted rate shall include the following:(i) Fixing of serviceable parts in position and replacement of unserviceable winding/parts with new winding/parts (ii) Replacement of small/minor parts viz. nuts, bolts, washers, gaskets / packing, etc.(iii) Loading, unloading, carting to/fro to workshop(iv) Complete load testing after complete repair and re-installation as per relevant IS and as directed |
| 96 | 125KVA |
| 97 | 62.5KVA |
| 98 | 30KVA |
| 99 | M&L for dismantling and taking out radiator and strip opening radiator assembly, for servicing mechanically, proper cleaning of tubes using de-scaling solution, including repair to water tubes and top/ bottom tanks by soldering / gas welding to check leakages of tubes/tanks including replacement of gasket, nut bolts, etc. ensuring perfect leak proof service, re-assembling and fixing the same in position and testing the system complete all as specified and as directed for the following capacities of DG sets of any make:Notes: The quoted rate shall include the following:(i) Fixing of serviceable parts in position and replacement of unserviceable spares with new spares (ii) Replacement of small/minor parts viz. nuts, bolts, washers, gaskets / packing, etc.(iii) Loading, unloading, carting to/fro to workshop(iv) Complete load testing after complete repair and re-installation as per relevant IS and as directed |
| 100 | 125KVA |
| 101 | 62.5KVA |
| 102 | 30KVA |
| 103 | S&F water pump assembly including taking out of old unserviceable water pump assembly and diposing off complete all as specified and as directed suitable for the following capacities of DG sets: |
| 104 | 125KVA |
| 105 | 62.5KVA |
| 106 | 30KVA |
| 107 | Servicing silencer assembly, by removing the complete silencer assembly from DG set by removing nuts bolts, including opening the wall of silencer outlet, removing blockages, provding and fixing with new gasket, nut, bolts & washers, gaswelding on damaged portion on silencer pipe, etc. and reassembling the silencer with DG setand testing on completion complete all as specified and as directed suitable for the following capacities of DG sets: |
| 108 | 125KVA |
| 109 | 62.5KVA |
| 110 | 30KVA |
| 111 | S&F dynamo assembly including taking out of old unserviceable dynamo assembly and diposing off complete all as specified and as directed suitable for the following capacities of DG sets: |
| 112 | 125KVA |
| 113 | 62.5KVA |
| 114 | 30KVA |
| 115 | S&F diode (positive & negetive) suitable for rotary rectifier including taking out old unserviceable diode and diposing off complete all as specified and as directed suitable for the following capacities of DG sets: |
| 116 | 125KVA |
| 117 | 62.5KVA |
| 118 | 30KVA |
| 119 | M&L forcarring out repairs and overhauling of the self starter by taking out unservicable self starter 12V and connected unserviceable portion/s of electric wiring and replacing the armature, carbon brush, bearing, bendix penion, solenoid and reassembling and testing for functionality complete all as specified and as directed suitable for the following capacities of DG sets: |
| 120 | 125KVA |
| 121 | 62.5KVA |
| 122 | 30KVA |
| 123 | M&L forcarring out repairs, overhauling, calibration to FIP injector nozzles and connected accessories from authorised service centre, by replacing damaged spares if any and reassembling and testing for functionality complete all as specified and as directed suitable for the following capacities of DG sets: |
| 124 | 125KVA |
| 125 | 62.5KVA |
| 126 | 30KVA |
| 127 | S&F lead acid battery 12V 150Ah sealed maintenance free suitable for generator starting system as existing including taking off old unserviceable battery and disposing off complete all as specified and as directed |
| 128 | S&F lead acid battery 12V 180Ah sealed maintenance free suitable for generator starting system as existing including taking off old unserviceable battery and disposing off complete all as specified and as directed |
| 129 | S&F battery clamp heavy duty, with connecting wire made of copper 35sqmm, 1.5m long, with copper lugs of suitable sizes duly fixed including taking off old damaged clamp and disposing off complete all as specified and as directed |
| 130 | S&F four pole change over switch with SS enclosure of 100A capacity fixed to panel board with necessary arrangement including nuts, bolt, lugs, glands, etc. complete all as specified and as directed |
| 131 | S&F four pole change over switch with SS enclosure of 63A capacity fixed to panel board with necessary arrangement including nuts, bolt, lugs, glands, etc. complete all as specified and as directed |
| 132 | S&F star delta starter, fully automatic, air cooled type, relay range 17 to 25A,with all accessories including single phase preventor, 415V, 50Hz suitable for 25HP motor including taking out old one and disposing off complete all as specified and as directed |
| 133 | S&F star delta starter, fully automatic, air cooled type, relay range 15 to 22A, with all accessories including single phase preventor, 415V, 50Hz suitable for 15 to 20HP motor including taking out old one and disposing off complete all as specified and as directed |
| 134 | S&F star delta starter, fully automatic, air cooled type, relay range 8 to12A, with all accessories, 415V, 50Hz suitable for 10HP motor including taking out old one and disposing off complete all as specified and as directed |
| 135 | S&F rotary barrel hand driven pump set suitable for transferring oil, diesel & kerosene, dual directional operation, solid cast iron construction, steel tubing for inlet and outlet, 1 inch outlet including 5m durable flexible pipe nd including taking out old one and disposing off complete as specified and as directed |
| 136 | S&F in repairs GI strip of size 32x6mm with saddles and fixing screws, etc. for conductors above / below ground as earth continuity conductors for earthing or connection upto test point complete all as specified and as directed |
| 137 | &L for earthing using GI earthing strip with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI strip of size 25x4mm extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 40mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications including dismantling and disposing off old unsericeable earthing complete all as specified and as directed |
| 138 | Notes for serial item No. 200 to 202: (i) The cost of GI / copper earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included(ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item(iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge |
| 139 | M&L for opening of pressure feed filtration plant cum iron removal plant, 36000LPH capacity, including oxidation chamber, alum dosing chamber, sodium carbonate dosing chamber, air compressor and taking out old unserviceable filter media such as sand, pebbles, etc. (including setting aside serviceable pebbles for reuse) and cleaning inside of filtration plant entirely with with air compressor complete all as specified and as directed |
| 140 | M&L for opening of pressure feed filtration plant cum iron removal plant, 40000LPH capacity, including oxidation chamber, alum dosing chamber, sodium carbonate dosing chamber, air compressor and taking out old unserviceable filter media such as sand, pebbles, etc. (including setting aside serviceable pebbles for reuse) and cleaning inside of filtration plant entirely with with air compressor complete all as specified and as directedNote: Spare parts will be neasured & paid seperately under relevant items. |
| 141 | M&L for cleaning and filling in serviceable pebbles obtained from old filter bed herein complete all as specified and as directed |
| 142 | Supply and filling in filter media pebbles of size not more than 40mm in the filtration plant complete all as specified and as directed |
| 143 | Supply and filling in filter media pebbles of size not more than 25mm in the filtration plant complete all as specified and as directed |
| 144 | Supply and filling in course silex of size 6 to 8mm graded suitable for filtration plant complete all as specified and as directed |
| 145 | Supply and filling in fine silex of size 0.5mm graded suitable for filtration plant complete all as specified and as directed |
| 146 | S&F gun metal globe or gate valve of 50mm bore with iron wheel head, screwed both ends for iron pipe and fixed, heavy duty, including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, and earthwork in any type of soil or breaking/cutting into road/interlocking tiles/cement concrete, etc. and making good the disturbed surfaces including taking out and disposing off old unserviceable valves complete all as specified and as directed. |
| 147 | S&F butterfly valve (water type), of size 100mm, PN 1.6 with SS-304 disc, body SG iron, lever operated, with nitrile/EPDM rubber lining,suitable for inlet and outlet GI piping of filtration plant including taking out old unserviceable butterfly valve from any position / location and disposing off complete all as specified and as directed |
| 148 | S&F stainless steel pressure gauge 0 to 300psi, 96mm diaincluding taking out old unserviceable gauge from any position / location and disposing off complete all as specified and as directed |
| 149 | Supplying, fixing / laying steel water tubing, medium grade, 100mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings viz. bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange, etc. ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches for water connectionsincluding all necessarywelding, etc. as required at site and taking out old unserviceable tubing and disposing off complete all as specified and as directed |
| 150 | Supplying, fixing / laying steel water tubing, medium grade, 25mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings viz. bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs, unions, flange, etc. ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches for water connectionsincluding all necessarywelding, etc. as required at site and taking out old unserviceable tubing and disposing off complete all as specified and as directed |
| 151 | M&L for preparing of old steel / metal surfaces of any descriptionby scrapping of surfaces, smoothening with sand paper, derusting and painting two coats of synthetic enamel paint (tint as approved) of outer surface of MS sheet of filtration plants of any capacity,complete all as specified and as directed |
| 152 | M&L for preparing of old steel / metal surfaces of any descriptionby scrapping of surfaces, cleaning of chamber removing of mud from insideand painting two coats of synthetic enamel paint (tint as approved) on iron cover of valve pit chamber and GI pipe at various pump house with colour as approved by Eng-in -charge,complete all as specified and as directed |
| 153 | M&L for cleaning of internal surfaces of RCC semi-underground sump / reservoir by scrubing the surfaces with the help of coir brush, jute cloth and flushing out / wiping clean all the accumulated mud / siltinside the tank, cleaning and disinfecting the surfaces by applying suitable approved chemical solution @0.2kg/sqm then applying two coats of lime wash on all internal surfaces like wall, ceiling, floor, etc. and writing tank number, capacity of tank, date of cleaning with white synthetic enamel paint over a black synthetic enamel paint base (of suitable dimensions) with size of letter 4\" height complete all as specified and as directed for sumps of the following capacities: |
| 154 | 5000 Litres |
| 155 | 125000 Litres |
| 156 | M&L for taking out raw & treated water sample from pump house or any other location and getting the same tested for physical, chemical, bacteriologicalanalysis and submitting test reportscomplete all as specified and as directedNotes:(a) Testing shall be got done from the Directorate of PHE or any Govt authorized testing laboratory as approved(b) Test reports shall be submitted to the entire satisfaction of the Engineer-in-charge for any payment purose(c) Each sample tested completely will only be considered |
| 157 | Supply only chlorine test kit, ISI marked, consisting of coloured sample with all neccessary testing components, fitments and OT solution packed in rexin finish wooden box complete all as specified and as directed |
| 158 | Supply only pH test kit, ISI marked, consisting of coloured sample covered under phenol red with all neccessary fitments, packed in rexin finish wooden box complete all as specified and as directed |
| 159 | Supply only Fe (hardness) test kit, ISI marked, consisting of all neccessary fitments, test tube and testing solution, packed in rexin finish wooden box complete all as specified and as directed |
| 160 | Supply only Alumino Ferric (Ferric Alum) grade-4 conforming to IS:299-2012 with additional requirements for purification of water, containing lead (as pb) 20PPM maximum and arsenic (as AS203) 4PPM maximum complete all as specified and as directed |
| 161 | Supply only calcium based granular (Calciume Hypochlorite) disinfect for treatment of water, having chlorine content 65% to70% in sealed drum in 45 Kgs , complete all as specified and as directed.Note: Test certificate and analytical report from manufacturer with batch number shown in purchase voucher shall be submitted by the contractor for each consignment of material supplied from the manufacturer or authorised dealer |
| 162 | Supply only aluminium chloride powder in 25kg bags conforming to IS 15573 complete all as specified and as directed.Note: Test certificate and analytical report from manufacturer with batch number shown in purchase voucher shall be submitted by the contractor for each consignment of material supplied from the manufacturer or authorised dealer |
| 163 | Supply only bleaching powder grade-I conforming to IS: 1065-1989 (2nd revision), ISI marked, minimum markable chlorine 33.5% by mass, packed in HDFC bag of 25kg capacity complete all as specified and as directed.Note: Test certificate and analytical report from manufacturer with batch number shown in purchase voucher shall be submitted by the contractor for each consignment of material supplied from the manufacturer or authorised dealer |
| 164 | Supply only hydrated lime (eatable) CaOH2 of purity 90% and conforming to IS: 1514-1990 in sealed containers / packets complete all as specified and as directed.Note: Test certificate and analytical report from manufacturer with batch number shown in purchase voucher shall be submitted by the contractor for each consignment of material supplied from the manufacturer or authorised dealer |
| 165 | Supplying, fixing, installation and testing calcium hypochloride chemical dozer with 200litre capacity preparation cum setting tank with lid, portable hole, inlet/outlet/drain connections, sludge deposition facility and fitted with SS-316 agitator including 100litres capacity solution storage tank (service tank) model, dosing pump set capacity 10LPH,maximum pressure 10kg/sqcm, stroke speed 100 duly fixed with suction/delivery pipes, RPM -1440 alongwith foot valves, injection check valve suction & discharge tubes including dismantling of old dozing machine and disposing off complete all as specified and as directedNotes:(a) Chemical dozer shall be as per relevant IS and of approved model and of approved manufacturer(b) The dozer shall be installed as per manufaturer\"s specfications and stipulations(c) The system shall be inclusive of all components, parts, etc. complete and no items shall be separately measured(d) The entire dozing plant shall be tested as per IS and test certificates shall be sumbited for any payment purpose |
| 166 | M&L for fabrication,supply and erection of bakelite flex display boards made out of MS square pole frame as per requirement of site, all sides covered with powder coated CRCA sheet & back side covered by galvanised sheet of 24 gauge , back side supported by MS channel incrossing. Front open box type with front side covered by flex board bakelite with digital printed letters and figures as required. The board shall be cubical type with screw fittings for openong and closing front side for maintenances, using MS channel for beading including inside electrical wiring complete with LED T/L fittings 20 Watt as specified and directed with starter, electronic ballast switches and necessary fixing arrangement, size of the board shall be upto13 feetx 4 feet x13 inches with 4 nos of LED light as per the requirement at site on roof, wall etc, all fixing on height upto 20 feet, all the arrangement for fixing/fitting shall be provided by the contractor as per requirement at site during execution of job on mentioned height, complete all as specified and as directed . |
| 167 | Supply and fixinrepalcement of 3/8 inches white suction/discharge tube suitable for Altoc dozing pump, complete all as specified and as directed |
| 168 | Supply and fixinrepalcement of stenner injection check valve3/8 inchessuitable for Altoc dozing pump , complete all as specified and as directed |
| 169 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal of debris complete all as specified and as directed |
| 170 | M&L for plain cement concrete 1:3:6 (type C-1) using 20mm graded stone aggregate as in foundations, mass concrete, plinth protection etc. complete all as specified and as directed |
| 171 | M&L rendering 10mm thick, in cement mortar (1:4) on walls / concretesurfaces, etc. finished even and fair without using extra cement complete all as specified and as directed |
| 172 | M&L for preparation of new masonry / concrete wall surfaces and applying three coats of white wash including all necessary staging, etc. as required complete all as specified and as directed |
| 173 | S&F star delta starter, fully automatic, air cooled type, relay range 08 to 12A,with all accessories including single phase preventor, 415V, 50Hz suitable for 10HP motor including taking out old one complete all as specified and as directed |
