|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Surface Dressing of ground including removing vegetation and in-equalitiess not exccending 15cm deep and disposal of rubbish lead up to 50m and lift up to 1.5m all kinds of soil |
| 3 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5cm in width as well as 10sqm on plan including getting out and dissposal of excavated earth upto 50m and lift upto 1.5m as directed by engineer-in-charge 2.1.1 all kinds of soil |
| 4 | Excavating supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches pilnth side of foundation etc. complete |
| 5 | Providing & laying of c.c. in 1:6:12 with c/s and 40mm G.S.B. in foundation of floor i/c all labour materials and T&P etc. |
| 6 | R.C.C. work in column 1:2:4 with cement coarse sand 20mm guage stone grit i/c all complete |
| 7 | M150 Brick Work in 1:6 c/s morter in substructure i/c all labour & T&P etc. |
| 8 | 12mm thk internal plaster in 1:3 with c/s mortar in wall i/c all materials labour & T&P etc. |
| 9 | Providing & laying steelbars icluding cutting binding placing and complete in all respect |
| 10 | Mild steel or iron work in plain heavy size such as trusses build up gates record racks roof work gates etc wrought to requried from including drilling holes riveting or welding where necessary and their fixing requried for completion of the work |
| 11 | Mild steel or iron work in plain smallsize and sectionsuch as holding down bolts hold fast tie rods grating etc. (when not including in an overall rates) wrought to requried shape as nesessary for bending etc including supply of steel and its wastage including coast of bolts nuts if reguried welding griding and making hols as requried for completion of work but |
| 12 | Providing and fixing precoated galvanised iron sheets (size shape and pitch of corrugation as apporoved by engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm per sqm as per is:277 in 240 mpa steel grade 5-7 microns epoxy primer on both sideof the sheet and polyester top coat 15-18 microns sheet should have protective gaurd film of 25 microns minimum to aviod scratches during transporation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge the sheet shall he fixed using self drilling |
| 13 | Providing and laying retifield glazed ceramic floor tiles of size 300x 300 mm or more thickness to be specified by the manufacturer of 1st quality conferming to is 15622 of approved make in colours white lvory grey fume red brown laid on 20 mm thick cement mortar 1:4 cement 1 cement 4 coarse sand jointing with slurry white cement and maching pigments etc |
| 14 | Providing and laying retifield glazed ceramic floor tiles of size 300x 300 mm or more thickness to be specified by the manufacturer of 1st quality conferming to is 15622 of approved make in colours shades except white lvory grey fume red brown laid on 20 mm thick cement mortar 1:4 cement 1 cement 4 coarse sand jointing with slurry white cement and maching pigments etc |
| 15 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of requried shade on undecorated wall surface to give an even shade over and icluding a priming coat with cement primer of approved brand and manufacture such as berger J&N shalimar asian paints afther thoroughly burshing the surface free from motar dropping and other foreign matter and also including prepairing the surface even with plaster of paris or approved synthectic material and sand papered smooth including cost of all materials |
| 16 | Painting of wood or iron work including sand preparing rubbing and cleaning as requried for proper completion of work (two coats) |
| 17 | Painting or varnising on iron works in small areas or new wood work with one coat of ready mixed priming paint & one oat of approved supperior quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T&P etc requried for proper completion of the work paint to be used should confirm to the ISI no. 103 |
| 18 | Providing and applying putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 19 | Supply and fixing 32mm thick flush door all complte fitting |
| 20 | Supply and fixing 32mm thick flush door all complte fitting bathroom and latrin 32mm thick fluse door all complete fitting |
| 21 | Supply and fixing 32mm thick flush door ply wood with handle all complete fitting |
| 22 | Wiring point for light with 1.6 sq. mm PVC insulated single core aluminium conductor cable in havey guage rigldstool condult pipe on surface complete with 8 SWG GI earth continulty wire plano type swich and cellingross/angle/batten holder on 3mm thick phenolic laminated backellte sheet etc |
| 23 | Wiring point for fan/fresh air fan (light duty exhaust fan)with 1.5 sq. mm PVC insulated single core aluminium conductor cable in havey guage rigldstool condult pipe on surface complete with 8 SWG GI earth continulty wire plano type swich and cellingross 0n 3mmthick phenolic laminated backellte sheet etc |
| 24 | Wiring point for Plug with 1.5 sq. mm PVC Insulated single coree aluminium conductor cable in havey guage rigldstool condult pipe on surface complete with 8 SWG GI earth continulty wire plano type swich and soket etc. |
| 25 | S/F of 18w hawells make all fitting complete mr |
| 26 | S/F of LED hawells make all fitting complete mr |
| 27 | Septic Tank of appropriate capacity for 2 years cleaning interval for 50 users |
| 28 | S/F of low density polythene seamless one piece moulded tank and placingthe same in properpoition including all |
| 29 | Providing and fixing GI/PVCPipe all fitting |
| 30 | Providing and fixing sanitaryPipe all fitting |
| 31 | Providing and fixing wc pan median type with cast iron P and S Trap all complete with automatic flushing |
| 32 | Providing and fixing 25mm PVC Pipe in position all complete |
| 33 | Providing and fixing 25mm PVC Pipe in position all complete |
| 34 | Providing and fixing 30mm dia socket |
| 35 | 200mm dia drilling and 350mm dia running from ground level to 50m below ground level in alluvia soil up to sand strata |
| 36 | Supply and lowering of 150 mm dia PVC plain casing pipe |
| 37 | Supply and lowering of 150 mm dia dia end cap |
| 38 | Supply and lowering of 150 mm dia dia top cap |
| 39 | Supply and lowering of 150 mm dia centerlizer |
| 40 | P/F 550x400mm hand wash basin of white glazed earthen ware ISI marked (hindustan neyer cera make) i/c supply of all materials labour and T&P company |
| 41 | P/F flat back 465x355mm x 265mm size lipped from uninal basin of white glazed earther were first quality (hindustan neyer cera make) ISI mark SI no. 304 |
| 42 | P/F polyvinyl chloride (CPVC) pipe 20mm dia |
| 43 | P/F polyvinyl chloride (CPVC) pipe 15mm dia |
| 44 | P/F bib brass bib cock 400gms i/c all |
| 45 | Making water connection of GI Pipe line with GI main as in SI 210 |
| 46 | PVC low level cisterns 10ltr capasity with all internal fittind of PVC etc. |
| 47 | Handpump with submerciable |
