Tender For Civil Work For Rennovation Of Wash Rooms And Paintings Works In Vsez
Tender Value
17 Lakhs
Estimated cost
Bid Submission
20 Nov 2024
0 days left
EMD
34000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Civil Work For Rennovation Of Wash Rooms And Paintings Works In Vsez Civil Work Of Renovation Of Wash Rooms, Doors And Windows And Painting Work In Shed No-6 And 17 At Sdf-1 Building And Trading Shed No-2 In Phase-1 Of Vsez
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 2 | Providing and laying Ceramic glazed floor tiles of required size(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in any colours , laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Applying primer coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel worksfor window grills |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats |
| 6 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.( Two coats) |
| 7 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S.gusset plates at the junctions and corners, all necessary fittings like lugs,door hinges,2nos. door handles,1no.150mm long Tower bolt,1no. aldrop,250mm long &16 mm dia rod with neoprim rubber beadingincluding applying a primingcoat of approved steel primer and fixing to walls with necessary chipping and grouting including line,level as per directions of Engineer ,all materials,tools, labour complete.(Using Using M.S. angels 40x40x6 mm for diagonal braces) |
| 8 | Renewing new glass panes of 4 mm th.for panels of windows , with putty and nails where ever necessary including racking out old puttyetc. Glass panes of 5mm thickness (weight not less than 10.00 kg/sq.m) |
| 9 | Renewal of old putty for glass panes with necessary clips or pins including all materials, tools and labour complete . |
| 10 | Repair of existing MS windows with cutting and welding and fixing of hinges if required including all as per instructions of Enginner in charge (trading shed-2) |
| 11 | supply and fixing ofextensionFan rods of 1.20mt length including fixing for fans |
| 12 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 14 | Providing 20 mm cement plaster of mix (1:4)including all materials ,tools and labour |
| 15 | Providing & fixing 30 mm thick solid panel PVC door shutter with shutter frame consisting of frame made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet fortop, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insertfor top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thickPVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, including all fixturescomplete as per direction of Engineer–in–charge, manufacturers specification. |
| 16 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 17 | Providing wood work with country wood/sal wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 18 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 19 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm |
| 21 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 22 | Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi chambered frame and mullionextruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullionshall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double Pinned glass panes and silicon sealant. |
| 23 | Providing and fixing factory made uPVC white colour sliding glazed window two track four panels with aluminium chanenel for roller track,wood pile ,zink alloy powder coated handle on three panels along withmulti point lockingsystem ,nylon rollers with SS 304 body using R3 series. |
| 24 | Providing and fixing Powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions withdash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.including cleat angle, aluminium snap beading , 6 mm rubber beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in- Charge. ( Glazing, paneling and dash fasteners to be paid for separately) |
| 25 | Providing and fixing powder coated aluminium ( minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixinghinges/ pivots and making provisionfor fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required. |
| 26 | Providing and fixing glazing with float glass panes of 5.00 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the drawings and the directions ofengineer- in charge. |
| 27 | Providing and fixing aluminium hanging floor door stopper, ISI marked |
| 28 | Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete |
| 29 | Removal, Loading, Transporting of Debris,Dust, Buildingrubbis, Surplus earh,or any other waste etc., and unloadingto disposal places/Areas, : up to a lead of 3.00 KM out side the zone |
| 30 | Transportation ofremoved doors and windows from SDF-1 to SDF-4 |
| 31 | Earth work in excavation in all types of soils(for laying pipe at SDF-1bldg entrance) |
| 32 | Providing and laying PCC (1:2:4) with 20 mm HBG metal |
| 33 | Providing and fixing sun control film to window glasses at lotus bldg |
| 34 | Filling with earth in ductrooms |
| 35 | Supplying and laying 110 mm dia PVC- pipe make of prince/sudhakar/ kisan/supreme/astral/finolex |
| 36 | Supplying and laying 90 mm dia PVC- pipe make of prince /sudhakar /kisan/supreme /astral/finolex |
| 37 | Providing fixing of flushing tank long bend pipes including all |
| 38 | Supplying and laying 110 mm dia PVC Elbows |
| 39 | Supplying and laying 110 mm dia PVC 45° bends |
| 40 | Supplying and laying 75 mm dia PVC 45° bends |
| 41 | Supplying and laying 75 mm dia PVC plainbends |
| 42 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix |
| 43 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : CM (1:6) |
| 44 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 |
| 45 | Providing RCC (1:1.5:3) with 20 mm HBG metal including shuttering allfor precast slabs at trading shed-2 |
| 46 | Steel reinforcement with deformed bars for slabs 8mm dia rods |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (making of Hindustan Sanitary ware/ Parryware/ Neycer/ CERA/Jaquar / Somany, Watertec, Kerovit by Kajaria, Asianpaints ,Prayag Polymers, ) |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (Hindustan Sanitary ware/ Parryware/ Neycer/ CERA/Jaquar / Somany, Watertec, Kerovit by Kajaria,Asianpaints ,Prayag Polymers, ) |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a Single 15 mm C.P. brass pillar tap(Hindustan Sanitary ware/ Parryware/ Neycer/ CERA /Jaquar / Somany ) |
| 50 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively (Hindustansanitary ware/parryware/ neycer/somany or equavalent) |
| 51 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats(25 mm nominal bore) at trading shed-2 |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 53 | Providing and fixing 15 mmcp brassstop cockfirst quality Indian Make heavy duty ( Hindware/ Plumber/ Parryware/ H & R Johnson, Karla / Essco / Somany/Kingston) |
| 54 | Supply and fixing NP soap dish heavy type with NP Screws |
| 55 | Providing and fixing C.P. brass long body bib cock -15 mm nominal bore( Hindware/ Plumber/ Parryware/ H & R Johnson, Karla / Essco / Somany/Kingston) |
| 56 | Providing and fixing 32 mm dia flexibleP.V.C. waste pipes |
| 57 | Providing and fixing unplasticisedPVC connection pipe |
| 58 | Providing and fixing unplasticised PVC connection pipe- 600 mm length-shed-17 |
| 59 | Supply & fixing towel rod (CP) of 24\" long and 3/4 \" dia |
| 60 | S/FAngle stop cock -two way tap of make Hindware/ Plumber/ Parryware/ H & R Johnson, Karla / Essco / Somany/Kingston) |
| 61 | Providing and fixingUrinal push cocks including all |
| 62 | Supply & Fixing piller cock heavy duty 1st qualitymake Hindware/ Plumber/ Parryware/ H & R Johnson, Karla / Essco / Somany/ Kingston)-trading shed 2 |
| 63 | Supply & Fixing of Health Faucet with 1m long tube and wall hook of make Hindware/ Plumber/ Parryware/ H & R Johnson, Karla / Essco / Somany/Kingston) |
| 64 | Providing and fixing 20 mm dia CPVC pipes including all make of prince/ sudhakar/ kisan/ supreme/astral/ finolex |
| 65 | Providing and fixing 25 mm dia CPVC pipes including allmake of prince/ sudhakar/kisan /supreme/astral/ finolex |
| 66 | Providing and fixing 40 mm dia CPVC pipes including all for water line make of prince/sudhakar/kisan/ supreme/astral/finolex |
| 67 | Chipping and removing of existing EWC including removal of debris (trading shed -2) |
| 68 | Supplying and fixing 90 mm plain bend including all-Shed no-6 & 17 |
| 69 | Supplying and fixing 90 mm Door Tee inluding all-Shed no-6 & 17 |
| 70 | Supplying and fixing 110 mm Door Bend inluding all-Shed no-6 & 17 |
| 71 | Supplying and fixing 110 mmsockets inluding all-Shed no-6 & 17 |
| 72 | Supplying and fixing 90 mmsocketsinluding all-Shed no-6 & 17 |
| 73 | Supplying and fixing 90 mmclamps inluding all-Shed no-6 & 17 |
| 74 | Supplying and fixing 110 mmclamps inluding all-Shed no-6 &17 |
| 75 | Supplying and fixing 90 mmVent cowlsinluding all-Shed no-6 &17 |
| 76 | Supplying and fixing 110 mmVent cowlsinluding all-Shed no-6 &17 |
| 77 | Supplying and fixing 40/25 RS BUSH including all-Shed no-6 & 17 |
| 78 | Supplying and fixing 40 mm Elbow including all-Shed no-6&17 |
| 79 | Supplying and fixing 40 mm Tees including all-Shed no-6 & 17 |
| 80 | Supplying and fixing 40 mm dia sockets including all-Shed no-6 & 17 |
| 81 | Providingand fixing 40 mm dia GI Union in GI pipeincluding all-Shed no-6 |
| 82 | Supply and fixing of 40mm x 1¼” PPR Female Threaded Adaptor (FAPT)conforming to DIN Standards 8077/8092 |
| 83 | Supply of 40mm x 1¼” PPR Male Threaded Adaptor (MAPT)conforming to DIN Standards 8077/8092 |
| 84 | Supplying and fixing 40/25 GI Socket including all-Shed no-6 & 17 |
| 85 | Supplying and fixing 40 mm dia clamps including all-Shed no-6 &17 |
| 86 | Providingand fixing 40 mm dia Ball valveincluding all-Shed no-6 & 17 |
| 87 | Supplying and fixingcpvc 25mm Elbows including all-Shed no-6 & 17 |
| 88 | Supplying and fixingcpvc 25mm sockets including all-Shed no-6 & 17 |
| 89 | Supplying and fixingcpvc 25mmUnioin including all-Shed no-6 & 17 |
| 90 | Supplying and fixing 25mmdia MABT including all-Shed no-6 7 17 |
| 91 | Supplying and fixing 25mmdia FABT including all-Shed no-6 & 17 |
| 92 | Supplying and fixing 25 mm dia clamps including all-Shed no-6 & 17 |
| 93 | Supplying and fixingcpvc 25mmdia FAPT including all-Shed no-6 & 17 |
| 94 | Providingand fixing Sintex tank top cap including all-Trading Shed no-2 |
| 95 | Providingand fixing CPVC 20mm dia tank nipple inclu ding all-Trading Shed no-2 |
| 96 | Providingand fixing20mm dia GI Tees including all-Trading Shed no-2 |
| 97 | Providingand fixing20mm dia GUN METAL Valve inclu ding all-Trading Shed no-2 |
| 98 | Providingand fixing 100mm long 20mm GI Nippleinclu ding all-Trading Shed no-2 |
| 99 | Providingand fixing 150mm long 20mm GI Nippleinclu ding all-Trading Shed no-2 |
| 100 | Providingand fixing20mm GI elbowinclu ding all-Trading Shed no-2 |
| 101 | Providingand fixing 20mm dia GI Union in GI pipeincluding all-Shed no-6,17 &2 |
| 102 | Cleaning of existing manholes including all at Trading shed-2 |
| 103 | Providingand fixing 50mm dia MS long bends including all-Shed no-17 |
| 104 | Providingand fixing 50mmMS flange including all-Shed no-17 |
| 105 | Supplying and laying Nahany trap with joli |
| 106 | Supplying and fixing 110 mm plain bend including all |
| 107 | Supplying and fixing 110 mm dia single plain Tee |
| 108 | Supplying and fixing 110 mm dia singleTeewithDoor |
| 109 | Supplying and fixing 110/75 mm dia reducer bush |
| 110 | Supplying and fixing 110 mm dia plain elbow |
| 111 | Providing and fixing of 100 mm dia steel jolly (with hole & plain jollies) |
| 112 | Providing and fixing of 25/15 mm Brass -Tee including all. |
| 113 | Providing and fixing of 25/20 mm plain-Tee including all. |
| 114 | Providing and fixing of 20/15 mm Brass Elbow including all. |
| 115 | Providing and fixing of 25/20 mm BRASS ELBOW including all. |
| 116 | Providing and fixing of 20/15 mm BRASS-Tee including all. |
| 117 | Providing and fixing of 20 mm PLAINELBOW including all. |
| 118 | Providing and fixing of 25 mm PLAINTEE including all. |
| 119 | Providing and fixing of CP flanges including all. |
| 120 | Providing and fixing of 25mm ELBOW including all. |
| 121 | Providing and fixing of 20 mm BRASS TEE including all. |
| 122 | Providing and fixing of 50 mm -100 mm long nut &bolds at Shed-17including all. |
| 123 | Providing and fixing ISI marked aluminiumbutt hinges 125x75x4 mm with necessary screws etc . |
| 124 | Welding of MS flange to MS pipe from tank |
| 125 | Execution of miscellaneous works, which are not covered under above items. |
| 126 | Supply of 12\" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Anchor make |
| 127 | Providing and fixing20W LED Lights |
| 128 | Supplying and fixing 3 plate jumbo ceiling rose |
| 129 | Supplying and fixingof 2way 5/6A switch modular switch/ socket on the existing modular plate/ switch including connections |
| 130 | Supplying and fixing 3 plate jumbo ceiling plate |
| 131 | Supply and fixing of 1.5 sq mm wire including all |
AI Tender Summary
Tender Timeline
Oct 30, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 21, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender