|
| 1 | Repairing and maintenance |
| 2 | Demolishing cement concrete manually . By mechanical means including disposal of materials with all lifts and up to 50m lead etc complete as per direction of the Engineer in charge.a) Normal concrete 1 : 3 : 6 or richer mix ( i/c equivelent design mix) |
| 3 | Demolishing brick work including stacking of serviceable materialsand disposal of uncerviceable materialswith all lifts and up to 50m lead etc complete as per direction of the Engineer in charge.a)In cement Mortar |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work up plinth level 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) |
| 5 | Half brick masonry work with first brick in super structure up to floorfive level including cost of all materials as required complete. A) in cement mortar 1:4(1 cement: 4 Fine sand) |
| 6 | Providing and laying cement concrete 1 : 2 : 4 (1Cement :2 fine sand : 4 graded well burnt brick aggregate ) flooring finished with a floating coat of neat cement including cement slurry rounding of edges and strips etc complete.a) 40mm thick with 20mm well burnt brick aggregate. |
| 7 | 12 mm cement plaster of Mix, In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 8 | Neat Cement punning |
| 9 | Providing wood work in frames of doors, windows, clerestory wndows and other frames, wrought framed and fixed in position a) Local Teak wood |
| 10 | Providing corrugated GS sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with GI limpet washer filled with white lead and including a coat of approved primer and two coats of approved steel primer and two coats of approved paint of overlaping of sheets complete(up to any pintch of horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting of size and shape wherever required.a)0.63mmthick with zinc coating not less than 275gm / m2 |
| 11 | Providing ridges or hips of width 60Cm overall width plain GS sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.a) 0.63mmthick with zinc coating not less than 275gm / m2 |
| 12 | Providing and fixing flat pressed 3 layer medium density particleboard or graded particle board (Grade - I) IS: marked in ceiling with necessary nails etc complete ( Frame work to be paid separately) a) 12mm thick |
| 13 | Providing wood work in frames of false ceiling, partition etc sawn and put up in position. a)Jam, Garjan and chamal |
| 14 | Providing and fixinggamai wood lipping / moulded beading or taj beading of size 18 x 5mm fixed with wooden adhesive like fevicol etc and screws / nails on the edge of the preliminated particle board as directed by the particle board |
| 15 | Providing and fixingpanelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked broght finished / black enamelled MS butt hinges with necessary screws excluding panelling / or glazing, which will be paid for separately but including the wooden beading of 20 x 10mm for fixing panelling and or glazing as per direction of the Engineering in charge.a)Local Teak wood, 35mm thick Shutter |
| 16 | repairs to plasterof thickness 12mm to 20mm in patches of area 2.5Sqm and under including cutting the patches in proper shape and prepairing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all lead and lift including finishing even and smooth and curing complete as per direction of the Engineer in charge. (Ambassa and Gandacharra) a)With cement mortar 1 : 4 (1 Cement : 4 fine Sand |
| 17 | Providing and fixingflat pressed 3 layer particle board medium density exterior grade ( Grade - I) or graded wood particle board IS: 3087 marked to frame, backing or studding with screws etc complete (Frame, backing or studding to be paid separately) a) 12mm thick |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (Payment shall be made after submission of test certificate issued by the Manufacturer) a) New works (two or more coat) over and including water thinnable priming coat with cement primer. |
| 19 | Finishing walls with water proofing cement paint of equired shade of approved brand and Manufacturer(Payment shall be made after submission of test certificate issued by the Manufacturer) New works (two or more coatsapplied @ 3.84Kg / 10 Sqm ) |
| 20 | Painting wood workwith deluxe multi surface paint of required shade (Two or more coat applied @ 0.90ltr /10 Sqm over and under coat of primer applied @0.75ltr / 10 Sqm of approved brand and manufacture |
| 21 | Earth work in excavation by mechanical excavator / manual meansin foundation trenches or drains ( not exceeding 1.50m in width or 10Sqm on plan) including dressig of sides and ramming of bottoms, lift up to 1.5m including getting out the the excavated soiland disposal of surplus excavated soil as directed within a lead of 50M. a) All kind of soil |
| 22 | Supplying and filling in plinth under floors, foundations etc with sand from local quarry with all lifts including spreading in horizontal layers, watering, grading to required shape, ramming, consolidating and compacting each layer by using plate compactor or suitable method complete. a) Sand |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level. a)1 : 3 : 6 ( 1Cement : 3 Sand : 6 Graded well burnt brick Aggregate 20mm nominal size) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level.a) 1 : 2 : 4 ( 1Cement : 2 Sand : 4 Graded stoneAggregate 20mm nominal size) |
| 25 | First class work in foundation and plinth including cost of all materials as required complete. a) In cement mortar 1 :4 ( 1Cement : 4 fine sand) |
| 26 | Second class work in foundation and plinth including cost of all materials as required complete.a) In cement mortar 1 :4 ( 1Cement : 4 fine sand) |
| 27 | Reinforced cement concrete work in beam, suspended floors, roofs having 15o landings balconics, shelves chajja, lintelss, bands and stair cases up to five level excluding the cost of centering and shuttering finishing and reinforcement. a) 1 : 2 : 4 ( 1Cement : 2 Sand : 4 Graded stoneAggregate 20mm nominal size) |
| 28 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all completeup to floor five level. a)Mild steel and medium tensile steel |
| 29 | 12mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. a) In cement mortar 1 :4 ( 1Cement : 4 fine sand) |
| 30 | 20mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. a) In cement mortar 1 :4 ( 1Cement : 4 fine sand) |
| 31 | Providing and laying cement 1 : 5 : 10 (1 Cement : 5 fine sand :10 graded stone aggrwgate 20mm nominal size) alround S.W pipes including bed concrete standard design. a)100mm diameter S.W. Pipe |
| 32 | Providing and fixing collor ; 100mm sand cast Iron S & S as per IS - 1729 |
| 33 | Providing and fixing single equal junction of required degree with access door , insertion rubber washer 3mm thick, bolts & Nuts complete a)100 x 100 x 100mm : Sand cast Iron as pe IS 1729 |
| 34 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. a)100mm : Sand cast Iron as pe IS 1729 |
| 35 | Supplying and fixing C.I. cover without frame for manholes :a ) 455 x 610 mm rectangular C.I. cover (light duty)the weight of the cover to be not less than 23 kg. |
| 36 | Providing, laying and jointing glaze stoneware pipe grade \"A\" with stiff mixtureof cement mortar in the 1:1 (1 cement : 1 fine sand ) including testing of joints etc. complete: a) 100 mm diameter |
| 37 | Providing and fixing door piece, insection rubber washer 3mm thick, bolts & nuts complete a) 100mm1. sand cast iron S&S as per IS -1729 |
| 38 | Providing and fixing water closet squtting pan (Indian type W.C. pan ) with 100mm sand cast iron P or S trap 10ltr low level white P.V.C.flushing cistern with manually controlled device ( Handle lever) conforming to Is : 7231 with all fittings and futures completeincluding cutting and making good the wall and floorswherever requireda)White Vitreous china Orrisa pattern W.C. pan of size 580 x 440mm with integral type of foot rest. |
| 39 | Providing and fixing wash basin with C.I. bracket 15mm C.P brass pillar trap 32mm C.P. brass waste of standard pattern, including painting of fittings, bracket and cutting and making good the walls whatever require, a) White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P brass pillar trap. |
| 40 | Providing and fixing G.I. pipes of medim class as per IS 1239 with latest amendent complete with G.I. fittings and clamp including cutting and making good the walls etc complete as per CPWD specification and direction of the Eng in Charge.a)15mm dia Nominal bore |
| 41 | b)20mm dia Nominal bore |
| 42 | Honey comb brick masonry work of half brick thickness with 1st class brick in superstructure for all level including cost of all materials as required complete a) In Cement 1 : 4 ( 1 Cement : 4 Fine Sand) |
