|
| 1 | Dismantling Old Plaster or SkirtingRacking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, |
| 2 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 Coarse sand). DAR-13.4.1, |
| 3 | Polishing in high gloss/matt finish Melamine clear Polish on wood work in required colour/wooden shade texture with following process in the Sequence as detailed below. Melamine Polish on wood work(One or More Coat). DSR.N0-13.114), |
| 4 | Providing and Fixing of Green Veneer 4mm thickWall Panaling with 12mm Century Ply Frist aluminium Frame 1x2\"\" Section than 19 mm Century Black Board fix with gaip lncluding supply of all materials, labour and T&P etc.completion. as Per Direction of Engineer in charge. |
| 5 | Supply and Fixing of Laminated Wooden Flooring approved make, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 6 | Supply and Fixing of PVCLaminated Flooring 1 mmapproved make , including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 7 | Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. Forthickness of tiles 10 mm to 25 mm. DAR.N0-15.23.1 |
| 8 | Providing and laying Vitrified floor Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DAR-11.41.2) |
| 9 | Providing and laying Vitrified floor Size of Tile 600x1200 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DAR-11.41A.2.2) |
| 10 | Supply and Fixing of Angle Valve with Wall Flange Grohe Make. Code N0-22011000M, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 11 | Providing and Fixing of Eurosmart 2021 BathTub Spout with wall FlangeGrohe Make Code N0-13448003, including supply of all material, labour, T&P etc. complete. |
| 12 | Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. |
| 13 | Supply and Fixing of Concealed Body for Single Lever high flow Diverter with button Assembly, ingle Lever Exposed Parts kit og hi flow Diverter Consisting of operatingAlira 1 handle bath /Shower mixer wall flangeCode No-29375001+33963000, Grohe make, lncluding supply of all material, labour, T&P etc. complete. |
| 14 | Supply and Fixing of Tempesta 250, Head Shower set Round 380mm 9.5L Grohe make, Code No-26663000 lncluding supply of all material & labour and T & P etc. requird for proper completion of work. |
| 15 | S/F 15mm dia New tempesta F Trigger Spray Set wall hook, Grohe make Code N0-26354000, including supply of all material, labour, T&P etc. complete. |
| 16 | Providing and fixing of Durastyle toilet wall Mounted, Toilet seat and cover, For Concealed cistern, Rapid Sl 2 in WC 1, 13m with Skata Cosmopolitan Flush Plate Chrome Grohe makeCode N0-253609000+ 633790037+3853610l+ 38732000 including Cutting and making good the walls and floors wherever required. |
| 17 | Providing and Fixing of Dutch Vanity Description Length 81 cm, width-47 cm height 54 cm (Vanity+Basin+Mirror) frame Size-79x14x70 cm, Code N0-KB0333, Karovit make Including Supply of all Material and Labour etc. (Rs-23513) |
| 18 | S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete. |
| 19 | S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete. |
| 20 | S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. ( |
| 21 | S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 22 | S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 23 | Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. |
| 24 | Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete.( |
| 25 | Supply and fixing of Starck 3 Vanity basin white Counter Top wash Basin, with waste Set Code No-305490017+65807000, Grohe Make etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work. |
| 26 | Supply and Fixing of C.P. Waste Trep basin wall Flange Grohe make Code N0-29058000, including supply of all material, labour, T&P etc. complete. |
| 27 | Supply and Fixing of S.S. Jali 125 mm dia, |
| 28 | Supply and Fixing of PVCNahani Trep, |
| 29 | Supply and Fixing of WC ConnectorCode No-779665, |
| 30 | Supply and Fixing of WC Fastner, Code No-RBW001 |
| 31 | Providing and placing on terrace ( at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48) |
| 32 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, |
| 33 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, |
| 34 | Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 75mm dia meter. ( |
| 35 | Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. () |
| 36 | Providing and Fixing of UV Stabilised Fiberglass reinforced Plastic Sheet Roofing up to any Pitch, including Fixing with Polymer Coated \"J\" or \"L\" hooks, bolts & nuts 8 mm dia, G.l. Plain/bitumen Washers Complete but excluding the Cost of Purlins, Rafters, Trusses etc. the Sheets shall be manufactured out of 2400 TEX Panel Roving Incorporating Minimum 0.3%, Ultra-Violet Stabiliser in resing system under approximately 2400 PSl and hot Cured. they Shall be of Uniform Pigmentation and thickness without air Pockets and shall Conform to IS 10192 and IS 12866. the Sheets Shall be Opaque or translucent, Clear or Pigmented Textured or Smooth as Specified. 2 mm thick Corrugated (2.5\"\" or 4.2\"\" or 6\"\") or Step-Down (2\"\" or 3\"\" or 6\"\" ) as Specified.DAR N0-12.47.1, |
| 37 | Removing White or colour wash by Scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR-13.88, |
| 38 | Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), |
| 39 | Wall Painting with Premium acrylic emulsion paint of Interior grade, having VOC (VolatileOrganic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. Two Coat, DSR.N0-13.83.2), |
| 40 | Wall Painting with Premium acrylic emulsion paint of Interior grade, having VOC (VolatileOrganic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. One Coat, DSR.N0-13.83.1), Rs-75.40) |
| 41 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coatson new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), Rs-178.72 |
| 42 | Providing and Placing of Imported curtain TrackIncluding Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 43 | Providing and Placing of Wooden finished curtain RodIncluding Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 44 | Providing and Placing of Imported curtain FittingsIncluding Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 45 | Providing and Fixing/Placing of Fabric Silk & Satin Curtain Cloth Superior Quality as per Direction of engineer in charge. |
| 46 | Providing and Fixing/Placing of Fabric Noble Curtain Cloth Superior Quality as per Direction of engineer in charge. |
| 47 | Providing and Fixing/Placing of Fabric Embark Curtain Cloth Superior Quality as per Direction of engineer in charge. |
| 48 | Providing and Fixing/Placing of Fabric Daisy Curtain Cloth Superior Quality as per Direction of engineer in charge. |
| 49 | Providing and Fixing/Placing of Fabric Polyster liningCurtain Cloth Superior Quality as per Direction of engineer in charge. |
| 50 | Providing and Fixing/Placing of Fabric Zodiac Curtain Cloth Superior Quality as per Direction of engineer in charge. |
| 51 | Supply and Fixing of Chiek Blind approved make, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 52 | Supply and Fixing of Wooden Venetion Roller Blind approved make, including supply of all material & labour and T & P etc. requird for proper completion of work. |
| 53 | Providing and Placing of Out Door Furniture 4 Chair, 01 Toble Glass Top Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 54 | Providing and Placing of Motorised Hydraulic Double Bedwith 6\"\" Mattress (Ortho) & 2 Bed Side table approved brand Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 55 | Providing and Placing of Ottoman with Fabric Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 56 | Providing and Placing of T.V. UnitIncluding Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 57 | Providing and Placing of 6\"x3\"x2.5\"\" Classic Table made of teak wood with veneer Complete with polish with polish & Hardware as per design as per Direction of engineer in charge. |
| 58 | Providing and Placing of Polished teak wood chairs with moulded back ply Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 59 | Providing and Placing of Round Table Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 60 | Providing and Placing of Motirised Double arm Recliner Chair Including Supply of all Material and Labour etc. Complete as per Direction of engineer in charge. |
| 61 | S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. (Rs-1631)_ |
| 62 | 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. DAR-12.52.4, |
| 63 | Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/ Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron)DAR-21.1.1.2. |
| 64 | Providing and Applying water proofing Treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consising of applying. (A) After surface preparation, frist layer of slurry of cement @ 0.488 kg/Sqm mixed with water propfing cement compound @ 0.253 kg/Sqm, (B) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints og fibre cloth should not be less than 10 cm., (C) third layer of 1.5 mm thickness consisiting of slurry of cement @ 1.289kg/Sqm mixed with water proofingcement compound @ 0.670 kg/Sqm and coarse sand @ 1.286kg/Sqm this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and trucked info groove in parapet all around, (D) fourth and final layer of brick tiling with cement mortar (Which will be paid for separately. For the purpose of measurment the entire trated surface will be measured. DAR-22.6, (Rs-544.2) |
| 65 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60, |
