Tender For Special Civil Maintenance And Repair To Vts Tower, Technical Building, Inspection Quarter, Staff Quarter And Compound Wall At Bhadreshwar Repeater Station
Tender Value
50.43 Lakhs
Estimated cost
Bid Submission
21 Nov 2024
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhadreshwar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Civil Maintenance And Repair To Vts Tower, Technical Building, Inspection Quarter, Staff Quarter And Compound Wall At Bhadreshwar Repeater Station
BOQ
| Sl. No. | Item Description |
| 1 | Painting two coats with synthetic enamel paint of approved brand and manufacture(Higlos luxolBerger brand/Asian ) to give an even shadecleaning & preparing the surface good for painting, cleaning thepainting spots after painting, removal and placingof all the items in existingposition and as directed & as described as per condition at site includingthe cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.completeon outer surface of 60m height VTS Tower. |
| 2 | Removing dry or oil bound Plastic/Distemper emulsionpaint from wall surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches as directed including cost of supplyof all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 3 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as directed & as described as per condition at site includingthe cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 4 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre,as directed & as described as per condition at site includingthe cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 5 | Painting two coats with premium acrylic emulsion paint Inside VTS tower surface (BergerAsian/brand) of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shadecleaning & preparing the surface good for painting, cleaning thepainting spots after painting, removal and placingof all the items in existingposition and as directed & as described as per condition at site includingthe cost of all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.completeon outer surface of 60m height VTS Tower |
| 6 | Finishing with Epoxy paint (two or more coats) in VTS Tower basementprepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on steel galvanised iron/ steel works-Steel surface including the costof allmaterials,labours, tools& plants, and all other charges etc., complete.on work of suitable shade with ordinary paint of approved brand and manufacture including the cost of all materials, labours, tools & plants , scaffoldingetc., complete. |
| 8 | Applying Polishing on inspection Wooden Door all nessassary fittings like brackets, of approved quality as directedand cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 9 | Applying priming coatsWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 10 | VTS Tower Inside Stair Case Hand Railing |
| 11 | Square Hollow Section + 44.9 & 57.0mtr LVL |
| 12 | VTS Tower Hand Railling Outer side |
| 13 | MS Ladder of VTS Tower |
| 14 | Trap door |
| 15 | C I Cover |
| 16 | Paint to MS Main gate |
| 17 | Street Light |
| 18 | Painting two coats with synthetic enamel paint on existing work on existing surface including the costof allmaterials, labours, tools, scaffolding& plants and all other charges etc., complete. |
| 19 | VTS Tower Inside Stair Case Hand Railing |
| 20 | Square Hollow Section + 44.9 & 57.0mtr LVL |
| 21 | VTS Tower Hand Railling Outer side |
| 22 | MS Ladder of VTS Tower |
| 23 | Trap door |
| 24 | C I Cover |
| 25 | Paint to MS Main gate |
| 26 | Street Light |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour togive an even shade :One or more coats on old work, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 28 | Street Light foundation top surface |
| 29 | Kerb wall surface |
| 30 | Road markingof 120mm wide |
| 31 | Providing and fixing hardware fittings and specials of approved quality and brand or ISI make as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality.as directed including cost of supplyof all materials, labours, tools & plants, scaffolding and all other charges etc. complete |
| 32 | Replacement of 100x85x5.5 mm (heavy type) hinges for Doors & Windows |
| 33 | 75x65x4mm (heavy type) butt hinges for Fly proof shutter |
| 34 | 50x40x2.5mmbutt hinges for Door Cleat |
| 35 | Replacement of 150mm Brass tower bolts |
| 36 | Brass 250x10mm tower bolt |
| 37 | Replacement of 100 mm Brass tower bolts |
| 38 | Brass 150x6mm hooks & eye |
| 39 | 100mm Brass handle for Fly proof Shutter |
| 40 | 125mm Brass handle for for window |
| 41 | 150mm Brass handle for for Door |
| 42 | Aldrop 200mm |
| 43 | Aldrop 230mm |
| 44 | Aluminium die cast body tubular type universal hydraulic door closer |
| 45 | Cup bord lock |
| 46 | Door magnetic catcher |
| 47 | Floor door stopper |
| 48 | Repairing and replacement existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including the supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 49 | Doors |
| 50 | Window shutters with Frame |
| 51 | Replacement of damaged/broken from glazed window shuttter with 4mm thick glass panes of approved 1st quality wood beading disposal of the debris, stacking of the old removed materials away from the site and as described as per condition of site including the all materials, labours, tools & plants and all other charges etc.complete. |
| 52 | Providing and fixing of wood work with approved Ist quality seasoned non- teak wood, free from knots, in position in frames for doors, cupboard etc. as directed including fixing m.sholdfast grouted in cement concrete 1:2:4(1 cement: 2 COARSE SAND: 4 graded stone aggregate 12.5mm nominal size ) in the walls as directed including cost of supply of all materials, labours, tools& plants and all other charges etc. complete. |
| 53 | Providing and fixing ISI marked door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters.35mm thick shutters including ISI marked Brass butt hinges bright finished of required size with necessary screws |
| 54 | Providing and fixing glazed shutters for windows and clerestory windows using 4 mm thick float glass panes including ISI marked Brasspressed butt hinges bright finished of required size with necessary screws.30mm thick Shutters |
| 55 | 25mm thick (for cupbord shutter) including ISI Marked brass hinges necessarybrass screws, nails etc. as directed at site including cost of all materials, labours, disposal ofthe debris within a lead of 50mtr, tools and plants and all other charges etc. complete. |
| 56 | Providing and fiximg of fly proof shutter ofmember size (75mmx25mm thick ) with saint Gobain mosquito netof window shutterwith approved 1st quality,brand ofnetlon jalli and fixedwithteak wood beadingof approved 1st quality,brand and necessarybrass screws, nails etc. as directed at site, including cost of all materials, labours, disposal ofthe debris within a lead of 50mtr, tools and plants and all other charges etc. complete |
| 57 | Providingandfixing 8mm thick Glass/transparent polycarbonatesheet in circular glazing of VTS tower at 45.00mtr/57.00mtr level balcony including the costof dismantling broken glass carefully, fixing, fillingjoints with silicon, cutting, welding, and allmaterials, labours, tools& plants, scaffolding lifting &shifting of hiegh rise tower, all other charges etc., complete. |
| 58 | Removing of glasspanesfrom 45mtr & 57mtr level including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower,lifting &shifting of hiegh rise tower all other charges etc.complete. |
| 59 | Dismantling steel work in built up sections in angles, tees, flats and channels with all gusset plates, bolts, nuts, cutting rivets, welding, dismantling and stacking within 50 metres, as directed & as described as per condition at site including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower,lifting &shifting of hiegh rise tower all other charges etc.complete. |
| 60 | Providing and fixing aluminium work for Circular glazing level of 45mt and 57mt on VTS Towerwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 61 | Providingandfixing 8mm thick Glass panes in circular glazing of VTS tower at 45.00mtr/57.00mtr level balcony, including the cost all materials, labours, safety belt, Boosam chair/ Jhoola, ropes, Tools, Plants and Providing & Fixing net for safety around area of VTS Tower all other charges etc.complete. |
| 62 | Mirror polishing on stone work at VTS Tower Stair, flooring etc. where ever required to give high gloss finish complete includingthe cost of all materials, labours, Tools & Plant and all other chagres etc. completed. |
| 63 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 64 | For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. including the cost of all materials, labours, tools & plants , scaffoldingetc., complete. |
| 65 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm over)on existing cement paint surface including the costof allmaterials,labours, tools& plants, and all other charges etc., complete. |
| 66 | Wall painting with premium acrylic/plastic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, Including the cost of all materials, labours, tools & plants, scaffoldingetc., complete. |
| 67 | Removing dry or oil bound Plastic/Distemper emulsionpaint from wall surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches as directed including cost of supplyof all materials, labours, tools & plants, scaffolding, curing and all other charges etc. complete. |
| 68 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as directed & as described as per condition at site includingthe cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 69 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre,as directed & as described as per condition at site includingthe cost of all materials, labours,safety belt, scaffolding, tools & plants and all other charges etc.complete. |
| 70 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colourincluding the cost of all materials, labours, tools & plants , scaffoldingetc., complete. |
| 71 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50metres lead.For thickness of tiles 25mm to 40mm, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 72 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 73 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 74 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 75 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 76 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete |
| 77 | Providing and fixing Ist quality ceramic glazed wall tiles of size 600X300mm, conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, includingpointing in white cement mixed with pigment of matching shade complete as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 78 | Providing and fixing Ist quality ceramic glazed floor tiles 600x600x10mm (thickness to be specified by the manufacturer)conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 79 | Providing & laying prepolished granite stone on the old flooring 20mm(ovg) thick of approved quality & colour laid over a bed of CM 1:3 (1 cement: 3 River sand) of thickness 20mm(avg) pointing with white cement slurry after removal of existing floring including the cost of Replastering in CM 1:3, rubbing, polishing, washing, cutting, laying, fixing, leveling, maintaining gradient jointing, after removing the old flooring & preparing the surface fof providing granient jointing,as directed & as described as per condition at site including the cost of all materials, labours tools & plants and all other charges etc. complete. |
| 80 | Providing edge moulding to 18mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. -Granite work |
| 81 | Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 82 | Providing & Fixing of Sanitary fiitting directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 83 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, W.C. pan with ISI marked white solid plastic seat and lid, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 84 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps,as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 85 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 178 mm. |
| 86 | Replacement of unserviceable/damaged low level cistern 10litre capacity of approved quality and making connections of inlet, outlet withEWC/IWC including disposing the unserviceable materials from the site. Supply of all materials,labour,tools, etc. complete. |
| 87 | Providing and fixing 100 mm sand cast Iron grating for gully trap including the cost of all materials, labours, tools and plants and all other charges etc complete as directed. |
| 88 | Supplying Fixing oftowel rack with connected fittings& make with all nessassary fittings of approved quality fixed as directed in masonry wall. Supply of all materials, labours, tools & plants and all other charges etc. complete, as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 89 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 90 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms,As directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 91 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms,As directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 92 | S/F Water supply & Sanitary Fixtures fiitting directed including cost of supplyof all materials, labours, tools & plants and all other charges etc. complete |
| 93 | 20mm Shower arm with nose |
| 94 | 20mm Angle valve ( Basin inlet connection- Concealed with wall flange) |
| 95 | 15mm (Angular stop cock with wall flange & Jet Spray with 1meter pvc tube SS) |
| 96 | 15mmConcealed Stop Cock for water heater |
| 97 | 20mm thick CP pillar/Sink Cock wall mounted with flange) |
| 98 | 20mm Brass Bib cock |
| 99 | 32mm Brass wheel valve |
| 100 | 40mm Brass wheel valve |
| 101 | Soap stand/Dish |
| 102 | Supplying & fixing CI Manhole cover ofapproved size & make with all nesassary fittings of approved quality fixed as directed, Supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 103 | 300mmx300mm cover with frame |
| 104 | 600mmx600mm cover with frame |
| 105 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 106 | Providing and Fixing\" C\" PVC/Finolex 20 mm dia pipe (Heavy )-25 kgf /Sq.cm |
| 107 | Providing & laying 25 mm dia \"C\" PVC/Finolex(heavy duty) - 25 kgf /Sq.cm |
| 108 | Providing & Laying 32 mm dia\"C\" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm |
| 109 | Providing & Laying 40mm dia\"C\" PVC/Finolex pipes (Heavy duty)- 25 kgf /Sq.cm |
| 110 | Supplying & placing pvc water tank of approved make Syntex or equivalent 500 Ltr capacity at the roof of the building & making its connection with pipe line as directedand cost of supply of all materials, labours, tools & plants and all other charges etc. complete |
| 111 | Providing and fixing PVC pipes, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. Sewer line 100mm dia PVC pipe |
| 112 | Providing and fixing PVC pipes 110mm for Rain water harvestng , including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. Rain WaterHarvestingline 110mm dia PVC rigid pipe |
| 113 | Dismantling & removingG I barbed wire from angle fencing post including roll and stacking with 50 mtr lead, Including cost ofall tools, material, plant labour etc, complete. |
| 114 | Providing& fixing of New G I barbed wire toAngle fencing postincluding roll and stacking with 50 mtr lead, Including cost ofall tools,material,plant labour etc, complete. |
| 115 | Applying priming coatson GI Barbed wire With fencing post angle as ready mixed red oxideprimer of approved brand and manufacture on steel galvanised iron/ steel works, Including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge |
| 116 | Painting with synthetic enamel on GI Barbed wire with fencing post single paint of approved brand and manufacture to give an even shade Two or more coats on new work, as directed including cost of supplyof all materials, labours, tools & plants, scaffolding and all other charges etc. complete. |
| 117 | Clearing jungle along with Compound wall innser and outer sideincluding uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. As directedsupply of all materials tools and plants, labour etc. complete. |
| 118 | Repairs to existing C.C pathways with cement concrete 1:2:4( 1 cement : 2 river sand : 4stone aggregate of 20 mm nominal size)after dismentaling & removing damaged portion , cleaningwatering including the cost of all labours, materials, tools & plantsand other charges etc. complete |
| 119 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 120 | Construction of new Step fro Technical Building office including excation for step , pcc, masonary work, plaster work ect completed |
| 121 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer- in-charge. |
| 122 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 123 | Construction of Soak Pit as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 124 | Construction of Septic Tank as per drawing and as directed including curing, cost of supply of all materials, labours, tools & plants and all other charges etc. complete. |
| 125 | Buy back of DismentaledG I barbed wire(Qty. Same as above item 42) |
AI Tender Summary
Tender Timeline
Oct 30, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender