Providing And Fixing Open Gym In Stadium In Mc Sadhaura.
Tender Value
4.32 Lakhs
Estimated cost
Bid Submission
07 Nov 2024
0 days left
EMD
4620
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sadhaura → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Open Gym In Stadium In Mc Sadhaura.-Horse Rider Station ,Leg Press ,Pull Chair, Exercising Bar ,Twister:- , Arm Wheel ,stair stepper , Air Walker,Elliptical Exerciser,Seated Chest Press
BOQ
| Sl. No. | Item Description |
| 1 | Horse Rider Station: Providing, designing and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padalsshall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 2 | Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step ofsize 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Handle bars are to be provided with high quality grip rubber at top end. Padalsshall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 3 | Pull Chair: Providing, designing and fixing ofPullpair ofsize 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Handle bars are to be provided with high quality grip rubber at top end. Padalsshall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 4 | Exercising Bar:- Providing, designing and fixing Exercising Bar ofPullpair ofsize 1800 X 550 X 1700 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Handle bars are to be provided with high quality grip rubber at top end. Base plate coverto be made up from virgin LLDPEmanufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 5 | Twister:- Providing, designing and fixing Twister ofsize 1700 X 1300 X 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful andU V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 6 | Providing, designing and fixing Arm Wheel in a pair of size Each850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mmthick and other pipes of 40mm dia 3.00mnm thick all pipes made up of hotrolled tubular steel and hot dipped galvanized, and powder coated usingAkzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipeare robotic welded with joints scalloped as necessary and dressed offremoving sharp edges and burrs. Zinc primer paint to be applied at allwelding points prior to finishing. Handle bars are to be provided with high |quality grip rubber. Padals shall be made up of Nylon alloy with roundededge of prevent any impact of injury and seat to be made from virgin LLDPEmanufactured by rotational moulding with minimum thickness of plastic4.00mm, colourful and UV resistarnt environmental friendly.shall be maintenance free, duly oiled sealed and self lubricated made byreputed company to be approved by Engineer-in-Charge. Equipment to befitted within built limiters to prevent unwanted movements. All open ends ofpipe to be coloured by GI/LLDPE caps for user safety. The equipment to befixed on ground with concrete of minimum strength M25 and J shapedwelded bolts and once the concrete is set, fix the equipment on to it and covernuts and bolts with the base plate cover, all complete as per direction andapproval of Engineer-in-Charge regarding material, shape of equipment,.colour on metal, seat and base cover plate and fixing of equipment etc |
| 7 | Providing, designing and fixing of stair stepper of pair in a combination Each and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes madeand up of hot rolled tubular steel and hot dipped galvanized, powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped asnecessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to beprovided with high quality grip rubber at top end. Padals shall be made up ofNylon alloy with rounded edge of prevent any impact of injury and seat to bemade from virgin LLDPE manufactured by rotational moulding withminimum thickness of plastic 4.00mm. colourful and U V resistantenvironmental friendly. Bearing used shall be maintenance free, duly oiledsealed and self lubricated made by reputed company to be approved byEngineer-in-Charge. Equipment to be fitted within built limiters, to preventunwanted movements. All open ends of pipe to be coloured by Gl/LLDPEcaps for user safety. The equipment to be fixed on ground with concrete ofminimum strength M25 and J shaped welded bolts and once the concreteset, fix the equipment on to it and cover nuts and bolts with the base platecover, all complete as per direction and approval of Engineer-in-Chargeregarding material, shape of equipment, colour on metal, seat and base coverplate and fixing of equipment etc |
| 8 | Air Walker: Providing, designing and fixing of Air-Walker of size 100 x 550 Eachx1480mm labricated with main post of 14Omm dia and 3.00 mm thick andother pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steeland hot dipped galvanized, and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints ofpipe shall be robotic welded with joints scalloped as necessary and dressedoff removing sharp edges and burrs. Zinc primer paint to be applicd at allwelding points prior to finishing. Base plate cover shall be made up of virginLLDPE plastic by rotational moulding with minimum 4.00mm thickness Uvresistant and colour as approved by Engineer-in Charge. High quality grip rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearingshould be used in cquipment manufactured by reputed company duly sealedand self lubricated to be approved by Engineer in charge. Equipment to befitted with inbuilt limiters The equipment should be fixed on ground withconcrete of minimum strength M25 and J shaped welded bolts and whenconcrete is set, fixing the equipment on to it and cover nuts and bolts withbase plate cover. all complete as per direction and approval of Engineer-inCharge regarding material, shape of equipment, colour (of metal, seat andpedal), and fixing of equipment etc |
| 9 | Elliptical Exerciser:- Providing, designing and ize 1200 X 540 X fixing Elliptical Exerciser of Each 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40Omm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints sealloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all Rs. 27100/- welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent.unwanted movements. All open ends of pipe to be coloured by Gl/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 10 | Seated Chest Press:- Providing. designing and fixing Seated Chest Press of Each Pull pair of size 1800 X 700 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and Jshaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
AI Tender Summary
Tender Timeline
Oct 29, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender