|
| 1 | S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sbheet with Both side Lockignarrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Completethe Box shall be Painted with approvedaluminium Paint over Red Oxide Primer in 1:3:6 CC foundation as directed by E/I. |
| 2 | S/L of Aluminiuum conductor PVC Insulated armoured served sheathed 400Sq mm x 3.5 Core LT cable 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete in all respect. |
| 3 | Same as Above but size 240 Sq mm x 3.5 Core |
| 4 | Same as Above but size 120 Sq mm x 3.5 Core |
| 5 | S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insualted PVC bedded, Galvanied flat steel strip armored 185 Sqmm 3 Core 11 KV grade cable confirming to I.S. 7098 ( Part-II with latest amendement)at a depoth of 900 mm below ground level ovdr a cushion of 100 mmthick fine rriver. sand al around and protected with well burnt bricks in sides and on top purt across. The armoring of cable shall be properly connected with earth conductorby clamps etc. |
| 6 | Same as Above but size 70 Sq mm x 3 Core |
| 7 | S/F of 185 Sq mm 11 KV Joint Kit complete. Rate PSR |
| 8 | S/F of 70 Sqmm to 120 Sqmm 11 KV Joint Kit complete |
| 9 | S/F of 400 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 10 | S/F of 240 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 11 | S/F of 120 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 12 | S/F of 50 Sq mm cable Lugs (Item asUPPWD SOR 18) |
| 13 | Trenchles Drilling with HDPE 100 mm dia HDD for carring of Cable on Road Crosing complete with Repairing of all internal water connection/Sever Connection if necessary complete |
| 14 | Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation etc. as required. |
| 15 | Dismantiling & Removal of 11 KV S/S Transformer /CTPT with Loading Unloading with Proper shifting including connections Structure Complete. Rate PSR |
| 16 | S/F Steel tubualr Pole 9 M.Long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 17 | S/F Steel bubular Pole 11 M. long designated 410 SP/55 in 1:3:6 cement concrete foundation including excavation back fillingetc. Complete in allrespect. Rate based on S.I. No. 613/2018 on Weight basis |
| 18 | S/F of MS Channel, V shape, Bracing,Angel, Clamps and other required MS Iron Items etc. Rate PSR |
| 19 | S/F of 100 mm x 110 mm shackle insulator or100 mm x 80 mm Pin insulator including G.I. Bolts/spindle nuts etc. |
| 20 | S/f of 11 KV Pin insulator complete with Pin, Nuts, & Bolts complete with Gun fiting complete. |
| 21 | S/f of 11 KV Disc insulator complete with Fittings , Nuts. & Bolts complete with Gun fitting complete |
| 22 | S/E of Stay set at least 3.5 M. away from the Pole complete with galvanised 19 mm diax 1.80. M. long Sary clamps, stay insulator 19 mm x 600 double screw tightener, 7/4.00 mm G.I. stary wire etc. in 1:3:6; cemtn concrete complete . |
| 23 | Painting of the electric pole with 2 coats of aluminium paint over red primncer complete in all respect. |
| 24 | Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc complete. |
| 25 | S/F of 100 mm dia GIPipe Clas B Make Jindal Complete with required clamping . |
| 26 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. Rate SOR-18 |
| 27 | Deduction of Cable Rate during errection in Pipe/Duct ( Duct will be made by civil work Estimate) |
| 28 | Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories |
| 29 | SITC of TPMO Set and DO Fuse Set 11 Kv with Handle clamps nuts bolts and required Fuse complete in all rerspect Rate UPPCL 2017-18 |
| 30 | S/F of wire mesh Fencing with 2 Mtr high cage fabricated with 3 mm thick expended matal fixed on 50x50x6 mm angle frame having vertical spaced at 1 Mt and horizental spaced 1 Mtr. With 2000x1000 mm size door leaf frame 35x35x6 mm and vertical grouting at a depth of 300 mm complete. Rate SOR 2018 |
| 31 | S/C of Transformer Plinth 1.25x1.25 Meter x 2.3 Meter hight full brick work with 30 Cm foundation and 15 Cm hight CC in 1:3:6 on Top with surface plastering and white wash complete Rate PSR |
