Tender For Construction Of 0.60 Mld Stp
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Dec 2024
0 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 0.60 Mld Stp Construction Of 0.60 Mld Stp Using Mbbr Technology For The Work Of Construction Of 528 Tenements Gplu3) At Gandhi Nagar And Construction Of 360 Tenements G Plus3 At Anna Nagar At Pongalur Village In Avinashi Taluk Of Tiruppur District Under Ahp Hfa
BOQ
| Sl. No. | Item Description |
| 1 | Open Earth work excavation for foundation with all intial leads and lifts in all sub soil,clay etc.,to the required depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of not exceeding 15cm thick well consolidated depositing the surplus earth in places shown and levelling the site with all leads and lifts etc., complete in all respects. Initial lead of 10M-initial lift of 2M |
| 2 | Open Earth work excavation for foundation with all intial leads and lifts in SDR all soils and sub soils and to the required depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of not exceeding 15cm thick well consolidated depositing the surplus earth in places shown and levelling the site with all leads and lifts etc., complete in all respects. |
| 3 | With intial lead of 10 m and Intial lift of 2 m |
| 4 | With intial lead of 10 m and additional lift of 1 m |
| 5 | With intial lead of 10 m and additional lift of 2 m |
| 6 | With intial lead of 10 m and additional lift of 3 m |
| 7 | With intial lead of 10 m and additional lift of 4 m |
| 8 | Cement concrete 1:4:8 (one of cement, four of M-sand and eightofhard broken stone) using 20mmsize hard broken stone for foundation inclusive of shoring, strutting, bailing out water, ramming, curing, etccomplete in all respects as directed by the departmental officers. |
| 9 | Providing and laying in position Standard concrete Mix M-30 Grade using Sulphate Resistant Cement in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m\") 7670 kg. of M-Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including the cost of conveyance from plant to site,pumping,hire charges, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will b emade by the Department for the excess usage of materials).IN ALL FLOORS |
| 10 | Providing form work for centering, shuttering etc., for all reinforced concrete work such as plinth beam, raft beam, raft slab, grade beam etc., including strutting and shuttering wherever required using MS sheets of suitable size ofBG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete in all respects as directed by the departmental officers.For Grade Beam, Plinth beams,Column Footings etc.., |
| 11 | Providing form work for centering, shuttering etc., for all reinforced concrete work like slab, beams, lintels, loftetc., including shuttering, upto3.00m high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5 cm (Spaced about 91cm center to center) distance and supported by casurina props of size 10cm-13cm dia (spaced at 75 cm center to center) and removing the same after a specified period without damaging RCC works in all floors etc., complete in all respects as directed by the departmental officers. (Slabs, Lintels & Lofts) For slabs,linets, beams etc., |
| 12 | Providing form work for centering, shuttering etc., for all reinforced concrete work like lintels, window boxing etc., including shuttering, upto3.00m high using MS sheet of size 90cm x 60cm and BG 10, stiffened with MS angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joist of size 10 cm x 6.5 cm (spaced about 91cm centre to centre) distance and supported by casurina props of size 10cm to 13cm dia (spaced at 75cm centre to centre) and removing the same after a specified period without damaging RCC works in all floors etc complete in all respects as directed by the departmental officers. (Sunshade/Window/Boxing / column) For Sunshades,columns window boxing etc., |
| 13 | Fabricating and placing the following kinds of steel grills Fe 500 D grade steel reinforcement bars as per IS 1786-1985 for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., completein all floors (The rate to include the cost of binding wire steel also) |
| 14 | Brick work in cement mortar 1:6 (One of cement and six of M-sand) using Fly ash Bricks of size 230×110×70mm for super structure in the following floors including fixing the frames of doors and windows, scaffolding, proper setting curing etc, complete in all respects as directed by the departmental officers. IN GROUND FLOOR |
| 15 | Providing Ellis Pattern flooring 20mm thick (Ellis pattern) with layer of cement concrete 1:3 (one of cement and three of hard broken stone) (No sand) using hard blue granite chips of size 3mm to 10mm and surface rendered smooth over RCC slab including supplying and fixing 20mm dia GI pipe outlet etc., complete in all respects as directed by the departmental officers. |
| 16 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 17 | Plastering the walls with cement mortar 1:5 (One of cement and five of P-sand) 12mm thick including scaffolding, finishing smooth, setting, curing etc., complete in all respects as directed by the departmental officers. |
| 18 | White washing two coats using clean shell lime including the cost of lime gum brush etc.,complete in all respects as directed by the departmental officers |
| 19 | Painting two coats of cement paint over one priming coat of Cement paint over of first quality including the cost of cement paint, brushes, scaffolding etc.,Complete in all respects |
| 20 | Painting the new iron work with one coat of first class synthetic enamel paint of approved quality and colourin addition over the existing primer coat including the cost of paint patty brushes and scaffolding etc. complete in all respects as directed by the departmental officers |
| 21 | Finishing the top of roof slab with one course of Hydraulic pressed tiles 23cm x 23cm x 2cm using cement mortar 1:3 (One of cement and three of M-sand) mixed with water proofing compound at 2% by weight of the cement and pointing with the samemortar, finishing, curingetc.,complete in all respects as directed by the departmental officers. |
| 22 | Weathering course in concrete broken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion being 32:12 1/2 (Thirty two parts of broken brick jelly and twelve and half of slacked lime) laying to a thickness of 110mm and compacked and well beaten to 80mm by using wooden hand beater of weight not exceeding 2 kg hand beating sprinkling liberally with lime water and a small proportion of solution prepared by soaking kadukkai dry nut powder and jaggery (vellam) and giving required slope and thickness on roof etc.complete in all respects as directed by the departmental officers. |
| 23 | Supplying and fixing of 110mm dia PVC Rain water downfall pipe of4 kg/cm² conforming to IS 13592-1992 (Type-A) with necessary bends, shoes, cost of special clamps, coupler if necessary including cost of solvent cement, proper aligning, teakwood plugs of approved quality etc., complete in all respects as directed by the departmental officers. |
| 24 | Filling in basement with 40mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., all complete and directed by the departmental officers.(For filter media) |
| 25 | Filling in basement with 20mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., all complete and directed by the departmental officers.(For filter media) |
| 26 | Filling in foundation and basement with filling M-sand in layers of not exceeding 15 cm thick well watered, rammed and consolidated complying with relevant standard specification including the cost of supplying filling m-sand etc., complete in all respects as directed by the departmental officers. |
| 27 | Supply and run off 2 of 2.50 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed on walls and ceiling for mains including the cost of cable, PVC pipes and specials, cement, brass screws, TW plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. |
| 28 | Wiring with 2 of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark with continuous earth connection by means of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark in suitable PVC rigid pipe 2mm thick with ISI mark on surface run with suitable size concealed 16 gauge M.S. switch box covered by laminated hylem sheet 3 mm thick for LIGHT POINTS including the cost of cable, PVC pipes and specials, brass screws, ceiling rose, flush type 5 Amps SP Mark switch, PVC junction box, 16 gauge M.S.switch box covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. box, covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. in all respects as directed by the departmental officers with ceiling rose |
| 29 | Wiring with 2 of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark with continuous earth connection by means of 1.5 sq.mm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark in suitable PVC rigid pipe 2mm thick with ISI mark on surface run with suitable size concealed 16 gauge M.S. switch box covered by laminated hylem sheet 3 mm thick for FAN POINTS including the cost of cable, PVC pipes and specials, brass screws, ceiling rose, flush type 5 Amps SP Mark switch, PVC junction box, 16 gauge M.S.switch box covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. box, covered by laminated hylem sheet 3mm thick T.W.plugs, cement and labour, circuit mains etc., complete. in all respects as directed by the departmental officers |
| 30 | Supplying and fixing of 5 A /15A 3 pin flush type wall socket with15A flush type switch concealed in suitable MS box in flush with wall andcovered with 3mm thick hylem sheet including cost ofwall socket, switch and labour charges fo wall cutting,grouting, flushing and making good, painting with primary and finishing coat for MS box etc., complete as directed by the departmental officers. |
| 31 | Wiring with 2x1.5sqmmPVC insulated SC unsheated CU conductor of 1100 V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC accessories in flush with wall for 5 AMPS 3 PIN C.S. PLUG POINT AT CONVENIENT PLACES including the cost of cable, PVC pipes and specials, brass screws, flush type 5 amps 3 Pin C.S. plug, 16 gauge Msjoint box, 16 gauge MS switch box covered by laminated hylem sheet 3mm thick, cement, labour and making good of the concealed portion with suitable colour for concealed PVC plug point etc., complete as directed by the departmental officers. |
| 32 | Earthingas per ISI specification with an earth electrode of 2.1mt class \"B\" GI pipe of dia not less that 40mm and with 20mm dia copper earth flat of size 125mm x50mm x6mm, with funneling arrangement using charcoat, common salt, G.I reducer,. check nuts etc., and mansonry work and providing RCC cover slab 38mm thick for the Brick mansonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officer. |
| 33 | Supply and run off 8 SWG copper wire on walls or below ground level with necessary \"U\" nails earth work excavation and refilling & including the cost of all materials etc complete in all respects as directed by the departmental officers. |
| 34 | Supplying and fixing 63 amps 3 phase TPN metal clad main switch with reversible fuse unit on asuitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc.complete in all respects as directed by the departmental officers. |
| 35 | supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting etc.complete in all respects as directed by the departmental officers. |
| 36 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete (Lower end) with 2 module 300W fan step regulator (Lower end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\") etc.complete in all respects as directed by the departmental officers. |
| 37 | Supply and laying of 3 1/2 x 70 sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc.complete in all respects as directed by the departmental officers. |
| 38 | Supplying and fixing of mild steel grills of approved design for doors, windows, ventilators, grills, for passage verandah, staircase handrail etc., including cost of necessary screws, plugs one coat of red oxide primer of approved quality, labour charges for fixing etc., complete in all respects comlying with relevant standard specification and as directed by the departmental officers.(the design of grills should be got approved from the Executive Engineer before the supply) In all floors. |
| 39 | supply and Fixing of 40 KVA, 415V, 3 Phase, 50 Hz @ 1500 RPM Diesel Generator used for producing Electricity, Electric Start, Water Cooled Alternator mounted on a common base frame along with Fuel Tank, Starting Batteries with Leads, general accessoriesetc., as a complete set positioned in a self standing weather proof KG-CPCB Norms-2 typed Acoustic Canopy KG1600WS with necessary fresh air inletand hot air outlet louver arrangements as per the specification with Standard Control Paneletc.complete in all respects as directed by the departmental officers. |
| 40 | Supplying of SS bar screen consisting of 1 no. of fine screen for anna nagar bar screen chamber & 1 no. of fine screen for gandhi nagar bar screen chamber (SS304 Stainless Steel bar Screen of 2 mm thick & 10 mm bar spacing, manual screening), so as to remove the large sized solid particles present in the sewage waterassociated with a set of guide angles in SS flatetc.complete in all respects as directed by the departmental officers. |
| 41 | Supply of 2 Nos. (one working + one standby) of non clog Submersibleraw sewage transfer pumps to pump sewage from anna nagar collection tank to gandhi nagar equalization tank at 16.2 cu.m / hr flow rate. The pump shall be suitable for solid handling capacity of 22 mm with 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity with float. (1 W + 1 S) Submersible Non-clog Pumps Flow rate (each): 16.2 cum/hr Head: 14 Mtr Solid handling capacity: 22 mm Power: 2 HP Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 42 | Supply & fixing Sch\" 40 approved make uPVC pipe with all types of pipe specials , cutting the pipes to required length, preparing the surfaces of pipes for jointing, fixing the pipe specials using required fixing materials supplied by the same manufacturers, making water tight joints, making holes and cutting grooves in wallsusing required materials, providing suitable pipe clamps fixed to structural support - for connecting raw sewage pump from anna nagar collection tank to gandhi nagar equalization tank with 100 mm earth excavation. Pipe size - 50 mm, Distance - 100 rm, If this distance is more than 100 m as per site condition, cost will be extra as per rm. / earth excavation respectively etc.complete in all respects as directed by the departmental officers. |
| 43 | Supply of 3 Nos. (two working + one standby) of non clog Submersibleraw sewage transfer pumps to pump sewage gandhi nagar equalization tank to collection tank at 15 cu.m / hr flow rate. The pump shall be suitable for solid handling capacity of 22 mm with 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity. (2 W + 1 S) Submersible Non-clog Pumps Flow rate (each): 15 cum/hr, Head: 10 Mtr, solid handling capacity: 24 mm, Power: 1.5 HP, Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 44 | Supply of 3 Nos. (two working + one standby) of non clog Submersibleraw sewage transfer pumps to pump sewage from collection tank to MBBR Tank at 15 cu.m / hr flow rate. The pump shall be suitable for solid handling capacity of 22 mm with 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity. (2 W + 1 S) Submersible Non-clog Pumps, Flow rate (each): 15 cum/hr, Head: 10 Mtr , solid handling capacity: 24 mm, Power: 1.5 HP, Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 45 | Supply of Twin type rotary air blowers for collection tank capable of delivering required amount of free air at 4 m with required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase with acoustic enclosure. (1 W + 1 S) Twin Lobe blowers, Air Flow rate (each): 200 cum/hr, Pressure: 0.4 bar, Blower make: Kay / A1 / Akash, Motor Power: 7.5 HP - 1440 RPM, Motor make: Kirloskar / Eq, Motor Type: Foot mounted etc.complete in all respects as directed by the departmental officers. |
| 46 | Supply of Twin type rotary air blowers for MBBR tank capable of delivering required amount of free air at 4 m with required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 phase with acoustic enclosure (1 W + 1 S) Twin Lobe blowers, Air Flow rate (each): 600 cum/hr, Pressure: 0.4 bar, Blower make: Kay / A1 / Akash, Motor Power: 20 HP - 1440 RPM, Motor make: Kirloskar / Eq, Motor Type: Foot mounted etc.complete in all respects as directed by the departmental officers. |
| 47 | Supply of coarse bubble diffuser with 80 mm disc diffuers of EPDM membrane MoC pipe grid with necessary pipe to provide clog-free oxygen for collection tank. Diffuser make: Proflex / Aquaflexi, Diffuser type: 80 mm Disc etc.complete in all respects as directed by the departmental officers. |
| 48 | Supply of fine bubble tubular diffuser of high quality EPDM membrane of 90 mm diameter & 1000 mm length to ensure trouble free operation to provide clog-free oxygen for MBBR Tank. Diffuser make: Proflex / Aquaflexi, Diffuser type: Tubular, 90 mm Dia x 1000 mm Length, MoC: EPDM etc.complete in all respects as directed by the departmental officers. |
| 49 | Supply of 2 Nos. (one working + one standby) of non clog Submersiblesludge transfer pumps to pump sewage from collection tank to MBBR Tank at 20 cu.m / hr flow rate. The pump shall be suitable for solid handling capacity of 22 mm with 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity. (1 W + 1 S) Submersible Non-clog Pumps, Flow rate (each): 20 cum/hr, Head: 10 Mtr, solid handling capacity: 22 mm, Power: 2 HP, Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 50 | Supplying, installing, testing and commissioning of MBBR Media Consisting of the following: Type: Cyclindrical type, Make: Proflex, MOC: PP etc.complete in all respects as directed by the departmental officers. |
| 51 | Supply of Filter feed pumps for feeding the clarified water from clarified water storage tank to filters with the following specifications - 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity. (1 W + 1 S) Openwell submersible pump - clear water pump, Flow rate (each): 30 cum/hr, Head: 36 Mtr, Power: 7.5 HP, Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 52 | Supply of vertical pressure sand filter to filter the suspended matter escaped from the clarifier fabricated from MS Vessel Epoxy lined with the tank shell of 6 mm thick, top and bottom dish of 8 mm thick, suitable for a working pressure of 3.5 kg/cm2, frontal piping, valves, accessories, having control for manual operation of filter system flow & backwash cycle. Quantity:1 No, Diameter: 1800 mm, Height of shell: 2200 mm, Duty: To remove suspended solids from water, MOC: MS vessel with inner epoxy coating, Media: Graded pebbles, gravels & silex, Filtration rate: 12 m3/m2/hr, Flow rate: 30 cum/hr, Accessories: 65 mm Manual butterfly valves etc.complete in all respects as directed by the departmental officers. |
| 53 | Providing vertical activated carbon filter fabricated from MS Vessel Epoxy lined with the tank shell of 6 mm thick, top and bottom dish of 8 mm thick, suitable for a working pressure of 3.5 kg/cm2, frontal piping, valves, accessories, having control for manual operation of filter system flow & backwash cycle Quantity:1 No, Diameter: 1800 mm, Height of shell: 2200 mm, Duty: To remove suspended solids from water, MOC: MS vessel with inner epoxy coating, Media: Graded pebbles, gravels, silex & activated Carbon IV600, Filtration rate: 12 m3/m2/hr, Flow rate: 30 cum/hr, Accessories: 65 mm Manual butterfly valves etc.complete in all respects as directed by the departmental officers. |
| 54 | Supply of UV system for tertiary water treatment. The unit shall use quartz glass technology for superior UV transmission and specialized high intensity UV lamp. Make: Alfa / Eq, Flow rate: 30000 LPH etc.complete in all respects as directed by the departmental officers. |
| 55 | Open Earth work excavation for foundation with all intial leads and lifts in SDR all soils and sub soils and to the required depth as may be directed except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of not exceeding 15cm thick well consolidated depositing the surplus earth in places shown and levelling the site with all leads and lifts etc., complete in all respects. |
| 56 | Location - 1 No at anna nagar collection tank raw sewage line |
| 57 | Location - 1 No at gandhi nagar collection tank raw sewage line |
| 58 | Location - 1 No at treated water line |
| 59 | Supply of 2 Nos. (one working + one standby) of non clog Submersibletreated water transfer pumps to pump treated water from treated water tank at 55 cu.m / hr flow rate. The pump shall be suitable for solid handling capacity of 25 mm with 3 phase motor having CI casing & impeller complete with all accessories, motor of required capacity. (1 W + 1 S) Submersible Non-clog Pumps, Flow rate (each): 55 cum/hr, Head: 30 Mtr, Solid handling capacity: 25 mm, Power: 10 HP, Make: Kirloskar / Eq etc.complete in all respects as directed by the departmental officers. |
| 60 | Supply & fixing Sch\" 40 approved make uPVC pipe with all types of pipe specials , cutting the pipes to required length, preparing the surfaces of pipes for jointing, fixing the pipe specials using required fixing materials supplied by the same manufacturers, making water tight joints, making holes and cutting grooves in wallsusing required materials, providing suitable pipe clamps fixed to structural support - for treated water pump from gandhi nagar treated water tank with 100 mm earth excavation. Pipe size -80 mm, Distance - 500 rm,If this distance is more than 500 rm as per site condition, cost will be extra as per rm. / earth excavation respectively. MoC: UPVC Sch 40 for all other inter plant connections etc.complete in all respects as directed by the departmental officers. |
| 61 | Design, fabrication, assembling, wiring, supply of motor control centre shall be fabricated of suitable size. The MCC shall be sheet steel fabricated, finished with powder coating of approved color, and of floor mounted, free standing cubicle type withincoming MCCB - Phase indicating lamps With 63 amps changeover switch The quoted value is inclusive of flexible type power cables of Finolex / Eq make with cable trays etc.complete in all respects as directed by the departmental officers. |
| 62 | Supply of UPVC Sch 40 pipes & fittings for all inter plant connections till treated water tank. The airline header pipe will be only in MS etc.complete in all respects as directed by the departmental officers. |
| 63 | Erection and commissioning of STP of 0.6 MLD capacity including erection of all mechanical equipments etc.complete in all respects as directed by the departmental officers. |
| 64 | Added GST of 18% (All Items) |
AI Tender Summary
Tender Timeline
Oct 30, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 03, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender