|
| 1 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and removing from site complete all as spd and directed. |
| 2 | Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.5 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description n.exc. 1.00 sqmeach complete all as specified and directed. |
| 4 | Taking down shutter of any description exc.1.00 sqm. but n.exc. 2.00 sqmeach complete all as specified and directed. |
| 5 | Resecuring or easing and adjusting without taking down shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter n. exc 1 sqm each complete all as specified and directed. |
| 6 | Taking down shutters exc 1.00 Sqm but not exc 2.00 Sqm carefully from the frame and refixing in the same opening after necessary repair including easing, welding or any required item such as stay handle etc. and making good the existing surface complete all as specified and directed. |
| 7 | Repair/adjusting aluminium door for holding in position to shutters in frame including replacing of old damaged adjusting bolts, cleats, rubber gas- kits, screws and aluminium sections less than 1kg for each shutters and making proper functionable to aluminium doors/windows complete all as specified and directed. |
| 8 | Dismantling timber scantlings in framed work 40 sqcm and over in section, in any position complete all as specified and directed. |
| 9 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbingdown with water etc. and removing debrish from site complete all as specified and directed. |
| 10 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 11 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 12 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal of rubbish from the site complete all as specified and as directed. |
| 13 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 14 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins,facias, chajjas using necessary scaffolding and making good disturbed portion with rendering in cement plaster, 10mm thick in cement mortar (1:3) and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 15 | Material and labour for anti-termite treatement of soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall and making good the disturbed portion complete all as specified and directed. |
| 16 | Material and labour for precastcement concrete (1:2:4)type B0 (12.5 mm graded agregate) louvres and jallies, 25mm thick (measured solid), including all mouldings set jointed and pointed in cement mortar (1:4) including necessary formwork after demolition of old existing unserviciable louvres and jallies complete all as specified and directed. |
| 17 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as require superficial area not exc 150 sqcm complete all as specified and directed. |
| 18 | Material and labour for brick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6)including demolition of existing brick work built in cement mortar complete all as specified and directed. |
| 19 | Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 20 | Supply and fix 30mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to matchthe shade complete all as specified and directed. |
| 21 | Material and labour for 2nd class HW plain fillets, square, rectangular or trangular in section, wrought, chamfered or rounded screwed with nails or beads sectional area exc 13 & n.exc 25 Sqcm. complete all as specified and directed. |
| 22 | Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to square with plain, chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 23 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 24 | Supply and fix factory made PVC door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 25 | Supply and fix in repair 20-25 mm thick solid PVC board exterior grade fixed to frame with leaping with shutters , shelves of cup board or in kitchen cabinate etc. complete all as specified and directed. |
| 26 | Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC /Aluminium frame complete all as specified and directed. |
| 27 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 28 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 29 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.(Note: stainless steel butt hinges shall be paid separately) |
| 31 | Supply and fix in repair solid PVC wall lining consisting of 5 mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 32 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 33 | Supply and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 34 | Supply and fix in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 35 | Supply and fix 75mm size stainless steel butt hinges, medium weight complete all as specified and directed. |
| 36 | Supply and fix in repair 75mm size stainless steel butt hinges, medium weight complete all as specified and directed. |
| 37 | Supply and fix 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 38 | Supply and fix in repair 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 39 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 40 | Suplly and fix in repair 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 41 | Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 42 | Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 43 | Supply and fix in repair door stopper 150mm long cover plate, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to shutter complete all as specified and directed. |
| 44 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 45 | Supply and fix in repair mortice latch with two levers (vertical type), brass body, length of latch in 65mm complete all as specified and directed. |
| 46 | Supply and fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 47 | Supply and fix in repair ball bearing for rolling shutters complete all as specified and directed. |
| 48 | Supply and fix in repair door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 49 | Supply and fix galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or nut bolt complete all as specified and directed. |
| 50 | Supply and fix in repair galvanised steel wire cloth, 0.56mm nominal dia or wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or nut bolt complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate. |
| 51 | Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 52 | Supply and fix 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 53 | Supply and fix mild steel works as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including dismantling of wrought iron or mild steel work of any description complete all as specified and directed. |
| 54 | Taking down steel rolling shutter of any description and size of openingexc 3 sqm but n exc 6 sqmincluding all components/parts (except guide channel and bracket plates) from position and greasing, oiling all serviceable parts and refixing in same/exisiting position complete all as specified and directed. |
| 55 | Supply and fix suspended ceiling system with 9mm thick gypsum board edge tiles of size 593mm x 593mm with GI prelude section of 24mm face exposed grid of 600mm x 600mm (nominal). The tile shall have smooth vinyl laminated visual with washable metallised polyster foil backing & viney covered edges. The tile shall be laid on Prelude 32 with 24mm wide T-Section flanges colour global white (matching to tile colour) having roll formed double stroke retary stitching on all T-sections i.e., theMain runner 1200mm & 600mm Cross Tees with a web height of38mm (all sections). The perimeter trim to be wall angles of size 19mm x 19mm, secured to walls using screws at 450mm c/c maximum. The Tees, wall angle and the suspension system material shall be hot dipped galvanished steel of 90 GSM as per IS-277 (2003) and prepainted steel with baked polyster paint with OT bending capability. The grid shall be suspended with the accessories consisting of M6 Anchor fasteners with hanger hole, pre straightened hanger wire of 2.5mm of required lenght (max 1.8m) having tensile strenght of 344-413 Mpa (Optinally, adjustable hook clips made of 0.7mm thick Grade 1-C55 galvanised spring steel of dimension 10mmx20mm and 4mm aquiline wire to be used for level adjustment of main runner) complete all installation shall be carried out as per Manufacturer\"s recommended procedure complete all as specified and directed. Note :- Work shall be executed from aurhorised applicator of OEM as approved by GE. Make : Armstrong/ Saint Gobain/ Lafarge/ Everest. |
| 56 | Material and labour for welding in reapirs n.exc 2.5 cm in lengthand thickness of metal to be welded exc 6mm but n.exc 9mm thick complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate for G+4 storey bldgs. |
| 57 | Supply and fix in repair stainless steel 20mm dia curtain rod, fancy type with side and end holders and MS brackets fixed in brick /concrete wall with screws complete all as specified and directed. |
| 58 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 59 | Taking down and refixing, securing, erecting only with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position and in patch works complete all as specified and directed. |
| 60 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface complete all as specified and directed |
| 61 | Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 62 | Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mmthick (square/rectangular) area of each tile exceeding 0.06sqm but not exc. 0.11sqmas in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6)complete all as specified and directed. |
| 63 | Material and labour for glazed ceramic tiles of size 300x450x7 mm or 300x200x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 64 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mmgraded stone aggregate) as in sub base to receive tiles complete all as specified and directed. |
| 65 | Material and labour for 40mm thick cement concrete (1:2:4) (using 20mm graded stone aggregate) type B-1 as in floors and finished even and smooth with using extra cement complete all as specified anddirected. |
| 66 | Material and labour for vitrified ceramic tiles (premium quality) 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 67 | Materials and labour for mosaic tiles of size 24.7x12.2cm x 8mm thick fixed with adhesive on floor and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 68 | Material and labour 75mm tk PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base or base course of floor etc complete all as specified anddirected. |
| 69 | Material and labour for grinding and polishing by machine to existing kota stone/ marble/ granite/ slab flooringincluding treating the surface with beeswax polish complete all as specified and directed. |
| 70 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 71 | Material and labour for joint free anti skid outdoor coloured pavement tiles (good grip series) of size 300 mm x 300mm x 7 to 8mm thick, coloured, set jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc. and including 20mm thick screed bed in cement mortar (1:6) completeall as specified and directed. |
| 72 | Material and labour for 20 mm thick black marble (Black Zebra Kishangarh) machine cut, in floor etc laid over cement screed and jointed with grey cement slurry including cutting and polishing including laid over 20mm thick screed bed in cement mortar (1:6) completeall as specified and directed. |
| 73 | Material and labour for treatment of capillary rising damp completely eradicated by introducing an effective i.e capillary sealing, horizontal barrier across the masonry wall not exc 400mm thick by following method :-(i)Drilling : Drilling of holes @ 100mm centre to centre in walls.(ii) Cleaning of all the drill holes with blower and brush.(iii) Fixing of nozzle 12mm dia by mechanically in wall.(iv) Application of wacker SMK 1311, Silicon micro emulsion concentrate, diluting with 1:9 potable water.(v) Diluted SMK 1311, injecting under pressure with airless injection machine to all the drilled holes through 12mm nozzle.(vi) Concerated 100gm (Approx) of SMK 1311 should be injected in each holes.(vii) Leave it to minimum 48 hours time to complete the reaction of SMK 1311.(viii) Filling of the drilled holes by injecting cement slurry with airless injection machine through 12mm nozzle.(ix) Removing the 12mm nozzles from the injected drill holes. (x) Painting work to disturbed portion to match the existing surface complete.Note :- The above work shall be done by the authoriesd applicator as approved by GE.Make: - Savison Technologies,M/s FOSROC Chemicals , M/s Asian Paints Ltd, M/s STP Ltd |
| 74 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. |
| 75 | Material and labourfor 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) andfinish the surfaceseven and smooth without using extra cement as in wall complete all as specified and directed. |
| 76 | Material and labour for 5mm thick rendering onconcrete surfaces in cement mortar (1:3) andfinish the surfaceseven and smooth without using extra cement as in ceiling complete all as specified anddirected. |
| 77 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 78 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash completeall as specified and directed. |
| 79 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed. |
| 80 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 81 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying two coats of 100% premium acrylic emulsion painthaving VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surface complete all as specified and directed. |
| 82 | Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 83 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 84 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girthand applying one coat ofsynthetic enamel paint complete all as specified and directed. |
| 85 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium rubber beads, nails etc in square not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate. |
| 86 | Supply and fix shelf assembly made of hard plastic of size 600x150mm with chromium plated bracket guard and railing 60cm long fixed with screws in wall complete all as specified and directed. |
| 87 | Supply and fix in repair stainless steel plate rack 0.65mm thick of size 914x786x254mm complete all as specified and directed. |
| 88 | Supply and fix corner shelf assmebly of full size made of hard plastic, fancy type in three tiers fixed with screws for bath etc. complete all as specified and directed. |
| 89 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 90 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed. |
| 91 | Supply and fix in repair 20mm dia ball valvehigh pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. |
| 92 | Supply and fix 15 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorsincluding taking down existing unserviciable GI pipe complete all as specified and directed. |
| 93 | Supply and fix 20 mm bore steel tubesmedium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floorsincluding taking down existing unserviciable GI pipe complete all as specified and directed. |
| 94 | Supply and fix in repair 15 mm bore CP fancy type stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 95 | Supply and fix in repair automatic urinal sensor and senor flusher touch-free features which helps to maintain the hygiene complete all as specifed and directed. |
| 96 | Supply and fix in repair 15 mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes completeall as specified and directed. |
| 97 | Supply and fix in repair 15 mm bore bib taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes completeall as specified and directed. |
| 98 | Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 99 | Supply and fix in repair soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated fixed with brass screwscompleteall as specified and directed. |
| 100 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. |
| 101 | Supply and fix in repair 600x450mm bevelled edge mirror of selected quality glass 5 mm thick, mounted on 6 mm thick commercial ply wood, aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 102 | Supply and fix in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flushing pipe complete all as specified and directed. |
| 103 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe incl cast iron P or S trap fixed on floor plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 104 | Supply and fix in repair vitreous china white squatting pan of ‘Orissa’ pattern, size 580 x 440mm with integral foot rests including ‘P’ or ‘S’ trap, (excluding flushing cistern and flush pipe), including provn of cement concrete bedding (1:5:10) type E1 (using 20mm graded stone aggregate) complete all as specified and directed |
| 105 | Supply and fix in repair Vitreous china wash basin white flat back size 550 x 400mmincluding cutting for and pinning in ends of brackets or erecting stand including 32mm dia brass chromium plated waste fittingsfor glazed ware sinks, basin with long screws shanks and fly nuts flange end bedded in red lead cement and other end fixed including 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 800mm long PVC waste pipe complete all as specified and directed |
| 106 | Supply and fix in repair PVC water tank cover (threaded or lockable) suitable for 500ltr/1000ltr capacity water tank, fixed at any position and upto G+4 storey roof complete all as specified and directed |
| 107 | Supply and fix in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 108 | Supply and fix in repair 32mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. |
| 109 | Supply and fix in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls orlaid in trenches or in floors complete all as specified and directed . |
| 110 | Supply and fix in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls orlaid in trenches or in floors complete all as specified and directed . |
| 111 | Supply and fix in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal provided with access door complete all as specified and directed. |
| 112 | Supply and fix in repair 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 113 | Supply and fix in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 114 | Supply and fix in repair 75mm bore PVC (SWR) bends of any radius complete all as specified and directed . |
| 115 | Supply and fix in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed . |
| 116 | Supply and fix in repair 125mm dia stainless steel grating doom with hole fixed with cement complete all as specified and directed. |
| 117 | Supply and fix 15 mm bore PVC connection pipe 600mm long with PTMT nuts at both ends completeall as specified and directed. |
