Name of Work: Providing Speed Breakers at Verious Street in Division-06, Unit-02, Zone-01.
Sl. No.
Item Description
1
Providing and laying Tack coat over the existing bituminous surface using 2.0 kgs of bitumen emulsion (Rapid Setting 1) per 10 Sq.m area including cost of bitumen emulsion at the site, including labour charges for preparing the surface, and applying the required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete as per Clause 503 of MoRT&H Specifications Rev.5 (This rate is applicable only if the Work is carried out during NIGHT)
2
Providing Speed Breakers As Per IRC Design [Clause 56 of Irc: 99-1988] With Bituminous Concrete (As Per Clause 509 of Mort&H Specification) To The Required Grade Level And Alignment And Rolled With Vibratory Roller Etc.Complete And As Directed By Engineers And As Per The Plan Enclosed for Interior Roads
3
Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803
4
ProvidingAndFixing ReflectiveRoadStudsof Categorya Raised Pavement Markers Made Out of Poly Carbonate / Methyl Methecrylate /Abs Moulded Body Conforming to astm D 788 And ReflectivePanelsWith MicroPrismaticLensCapable ofProviding Total Internal Reflection of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values Conforming to astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Morth Circular No Rw/Nh. 33023/10/97- Do.Iii Dt 11.06.97. The Height, Width And Length Shall Not Be Less Than 15mm, 90mm And 100mm And With Minimum Reflection Area of 13 Sq.m On Each Side And The Slope To The Base Shall Be 35+/-5Degree Each Reflectors Shall Have A Cil Not Less Than Values Specified In Table 2 of Said MorthCircular. TheStrengthofDeteachment ofTheIntegrated Cylindrical Shanks,(ofDiameterNot LessThan19+/-2mmAnd Height Not Less Than 30+/- 2mm) From The Body Is To Be A Minimum Value of 500Kgf.Fixing Will Be By Drilling Holes On The Road For The Shanks toGoInside,WithoutNails AndUsingEpoxyResin Based Adhesive As Per Manufacturer’S Recommendation And Complete As DirectedByThe Engineer.TheMarkerShall Supporta Loadof 13635Kg Tested In Accordance With Astm D4280 And Confirming to Irc35-2015GuidelinesAnd.2 Year Manufacturers Warranty For The Satisfactory Field
5
Providing And Fixing of Retro Refelctorised Hazard Traffic Sign Made Out of High Intensity Prismatic Grade 30cm X 90 cm Rectangular Sheeting ConfirmingTo Type – Iv Standards of Irc 67- 2012 AndAstm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mmAnd 0.60M Below Ground Level.The Sign Post Should Be Painted As Per Irc 67-2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45cmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67-2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And A Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 (As Per Mort&H Specification No.801)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
