|
| 1 | Painting the OLD plastered walls with two coats ofExterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc.whereverrequired.as per (ISI STD) (It must provide excellent resistance against the growth of algaeandfungi on the walls.And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.. |
| 2 | Providing boringusing hand bore set150mm dia upto hard formation and boring 100mm dia below this in rock formation including hire charges of hand bore set and its accessories labour charges and transport charges for drillings preparing the site etc. providing and erecting 110mm dia (O.D.) P.V.C.pipe plain (wall thickness 4.5mm and slotted) upto water column and providing and filling the gap alround the 110mm dia PVC pipe with pebbles including clearing and developing the entire column by using compressor for a minimum time of 12 hoursproviding danger lights during night time etc. complete as directed during execution. |
| 3 | Supplying and lowering PVC pipe 125mm dia plain casing pipe of 6kg/sq.cm. ISI Std. |
| 4 | Supplying and lowering PVC pipe 125mm dia slotted casing pipe of 6kg/sq.cm. ISI Std. |
| 5 | Supplying and Jointing 40mm dia P.V.C pipe.includingcutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof afterfixing with necessary scaffolding etc. complete. |
| 6 | Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete. |
| 7 | Supplying and fixing P.V.C. screw down tap of size 20mm dia. |
| 8 | Supply and fixing of surface mount patty type 1 x 36 watt T.L fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. |
| 9 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable Colour for PVC concealed light (6 points Per coil) (For Rooms like Bath, Toilet & Pump room etc.) |
| 10 | Supply & Fixing of 48\" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18\" ) CROSS ARM WITH 700 MM DOWN PIPE ) |
| 11 | Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD).. |
| 12 | Painting old iron work two coats with ready mixed paint of superior quality and approved colour.(ISI STD). |
| 13 | 1.5 HP Jet Pump Set |
| 14 | Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for toplock and bottom rails.The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mmx30mm.The over all size of top raillock rail and bottom rail shall be 75mm x 30 mm.The over all size offrames shall be 50mmx45mmwith suitable rabate for housing the shutter.including labour charges etc.complete.as per ISI standard. |
| 15 | Plastering with cement mortar 1:3 (1 cement and 3 river sand) 12mm thick including curing etc.complete. |
| 16 | Plastering with cement mortar 1:4 (1 cement and 4 river sand)12mm thick including curingetc.complete. |
| 17 | Supplying and fixing in position best Indian type water closet 51cm of superior quality and approved make white glazed earthernware with P or S trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement4 river sand and 10broken brick jelly) and sand filling around the closet including finishing the surface with C.M.1:3 ( 1 cement and 3 river sand) 20mm thick including making good all the disturbed portions etc. complete. |
| 18 | Supplying and paving second quality colour glazed tiles 30x20cm x 6 mm with relevent ISI STD size of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cementpolishingclearingetc. complete.. |
| 19 | Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets15mm diaC.P.Pillar tap32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white leadteakwood plugscrews rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks). |
| 20 | MODULAR WIRING with 3x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire, for open PVC staircase light point ( WIRING FOR MODULAR SWITCHES,MODULAR PLATE, MODULAR PLATED M.S BOX,MODULAR MCB shall be added)(For these accessories items, provision shall be made separately which are separately included in the schedule of rates from L432 TO L730 and L730 & L731) |
| 21 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at2.319kg/m and Shutter frame made ofsection Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail: 50x44.45x2.5mm @ 1.292kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts- 250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer- 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu.Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium |
| 22 | Paving the flooring with CEMENT CONCRETE TILEShydraulic pressed Antiskid tiles as perpattern design 20mm thick in cm 1:3 including pointing with colour cement etc., complete.(ISI) |
| 23 | Supplying of 600mm dia - (24\") FRC Gully Gratings of600mm Dia. with 12 holes of 50MM Dia. (Cover with Frame) heavy duty as per IS:12592/2002. The frame & cover shall bear a non fracture load of 10MT for 30seconds with frame height of 165mm, cover height 90mm, Bearing (Seating area of cover)75mm with Hot Dip Galvanizing Hook of cover 16mm, frame edge protection flat of size 25 x 3mm exposed surface of M.S. rings shall be painted with anti corrosive bitumastic paint-complete one set (SWD 4) |
| 24 | Providing and laying first quality Vertified tiles of all colours of size605mmx605mmx9.6mm in cm 1:312mm thick including pointing with white cement.LabourMaterialsetc. (Relevent ISI std). |
| 25 | Painting old wood work with one coat of ready mixed paint of superior quality and approved colour.(ISI STD). |
| 26 | Removing the existing ventilators doors and windows including removal of frames hinges and fastenings carefully and stacking the same at site etc.complete. |
| 27 | Dismantling R.C.C.works carefully clearing away the debris as directed during execution. |
