Construction Of Prol At Govt Hospital In Ward No. 01 - Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Including Getting Out The Excavated Material, Refilling After Laying Pipe/ Foundation And , Jaisalmer-Rajasthan

Construction Of Prol At Govt Hospital In Ward No. 01 - Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground/Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work upto plinth level: 1:5:10 (1 cement: 5 fine/ coarse sand 10 graded stone aggregate 40 mm nominal size) Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1) cement: 6 coarse sand) Supplying and fixing Jaisalmer stone Dassa (sills) fine dressed upto 15 cm. Thickness including panny type omamental work. Supplying and fixing ashlar solid block pillars fully fine (3 lines) dressed as per design provided by Engineer In Charge. Supplying and fixing ashlar stone arches fuly fine (3 lines) dressed for 1.5 to 5m. Span (Net content payable) (a) Soorsagar or eqvt. White Ashlar for Tibaries. Fully Flowered leaves Supplying and fixing ashlar face stone 10 cm thick fine (3 lines) dressed (A) White ashlar Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line dressed (normal length of single piece not less than 0.90m) (a) Soorsagar or eqvt. White Ashlar Supplying and fixing ashlar sills, jambs, skirting, steps etc.rough dressed: 6.26.1 (A) Upto 15 cm thick Soorsagar or eqvt. White Ashlar Supplying and fixing ashlar coping moulded and counter slopped 7 to 10 cm. thick (2 line dressed) (normal length of single piece not less than 0.90m) (a) Soorsagar or eqvt. White Ashlar Providing & Installation of White ashlar stone Carved perforated Jali 50 to 70mm thick with height 600mm and length not exceeding 1250mm with pillar 900mm long with groove cutting etc. complete as per direction of Engineer-incharge (excluding cost of providing & fixing dassa). Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings. brackets, gates and similar works. Supply and fixing Jodhpur sand stone/equivalent Machine cut Dash, Coping sill, lintel fixed in cement sand mortar 1:4 (A) 15 cm (5) thick Labour charges for Animar dressing (old M.G.H. pattern) over Jodhpur or equivalent white Ashlar over already two line dressed surface by using special tools ie. toothed chisel etc. (For Jaisalmer stone ornamental chair having ornamental cut stone work flower and leaves and bell and butas on three side of seat (over patti muya) both hathas and back portion of chair fine dressed i/c pointing with cement stone dust mortar 1:2 complet in all respect.) Pointing on stone work with cement mortar 1:3 (1) cement: 3 fine sand) Flush/ Ruled pointing with pigments of matching shade

Refer document

Refer document

INR 4.65 Lakhs /-