Tender For Provisions Of Jaffery Wall Near Children Park Adjacent To Omq Area, Paver Blocks In Stn Hq For Widening The Road Near Parking Shed, Boundary Wall For Certain Accn, Shed Back Side Of Airmen Mess And Addn/ Altn To Kitchen Room At Vip Lounge Near
Tender Value
20.95 Lakhs
Estimated cost
Bid Submission
21 Nov 2024
0 days left
EMD
500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provisions Of Jaffery Wall Near Children Park Adjacent To Omq Area, Paver Blocks In Stn Hq For Widening The Road Near Parking Shed, Boundary Wall For Certain Accn, Shed Back Side Of Airmen Mess And Addn/ Altn To Kitchen Room At Vip Lounge Near Suproto Complex At Af Stn Bkt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Nov-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Nov-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for PCC(1:4:8)type-D2 using 40mm graded aggregate asin foundations, filling and mass concrete.sub base as in floors complete all as specified and as directed. |
| 4 | M&L for DPC with 40mm thick PCC (1:2:4) type B0 using 12.5 mm graded course aggregate with water proofing compound including necessary form work .Note: WPC Will be measured and paid seperately. |
| 5 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 6 | M&L Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed. . |
| 7 | Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 8 | Removing excavated material not exc 50 m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and as directed. |
| 9 | M&L for RCC (Design Mix M-25) as in beams , cantilevers, bressmummers, lintels over 1.5 m span including necessary form workcomplete all as specified and directed. |
| 10 | M&L for RCC (Design Mix M-25) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and as directed. |
| 11 | M&L RCC (Design Mix M-25) as in Chajjas including necessary form work complete all as specified and as directed. |
| 12 | S&F MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | Ditto all as per item No 12 above but 5 to 10mm dia as in stirrups & links etc complete all as specified and as directed. |
| 14 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 15 | M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in CM (1:4) finished even and smooth with mechanical mechenism without using extra cementcomplete all as specified and directed. |
| 16 | Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in CM (1:6) finished even and smooth with mechanical mechenism without using extra cement complete all as specified and as directed. |
| 17 | M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over and including one coat of wall care putty (minimum thickness 1mm) with Mechanical Meansand one coat of primercomplete all as specified and as directed. Note: Primer and Distemper to be carried out through air less spray machine (Mechanical Means) complete all as specified and as directed. |
| 18 | M&L for applying two or more coats of100% Premium acrylic emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over and including 1mm thick wall care putty over new surfaces with mechanical mechanism complete all as specified and directed. Note: Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast |
| 19 | M&L for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 20 | M&L for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor and finished rough to recive the floor tiles etc complete all as specified and directed. |
| 21 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and directed. |
| 22 | M&L for Non - skid DigitalCeramicjoint lesscoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including15 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 23 | M&L for glazed ceramic colouredDigital tiles in vertical surface300x450x7/300x600x7mm mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM (1:4) complete all as specified and directed. |
| 24 | M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specified and directed. |
| 25 | M&L cutting chases, pinning in , making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting not .exc 10cm girth in brick walls. |
| 26 | M&L for steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specifiedand making good in cement mortar (1:3) or cement concrete (1:2:4) type B-I including applying two coats of existing surface finishes of the building complete all as specified and directed. |
| 27 | S&F Flush shutters, 40 mm thick solid core construction, with block board core and plywood face panels, with matte finish mica both side, commercial type on both sides complete all specified. |
| 28 | M&L 35mm thick2nd Class hard wood glazed,gauzed and skelton shutters open rebeated and prepare to recive glass but dived into square with plain chamfered or rounded mitrd and rebeatedd sash bars stiles and rails as specifed in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and directed. |
| 29 | M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surfaces complete all as specified and directed. |
| 30 | Supply and fixing Aluminium anodised barrel tower bolt of extruded section of size 125mm.(ISI marked) complete all as specified and directed. |
| 31 | Supply and fixing Aluminium anodised handles 125mm sizeall as specified and directed (ISI marked)complete all as specified and directed. |
| 32 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 33 | S&F 100mm long butt hinges extruded alumn alloy with galvanised mild steel hinge pin, anodized and fixed type B-21 complete all as specified and directed. |
| 34 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (112mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete all as specified and directed.(Note: The unit rate quoted by contractor excludescost of glass which is measured and paid separately under respective items given here-in-after and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 35 | S&F for aluminium decorated grill for fixing in Upvc windows/ventilator (mesh size 50mm x 50mm x 5mm thick) complete all as specified and directed. |
| 36 | Supply and fixing Sheet glass toughned glass 5.5mm thick fixed in Upvc window including all fitting and fixturescomplete all as specified and directed. |
| 37 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat ofzink chromeprimer including necessaryrubbing with sand paper or grinded byhand grinder to achieve smooth and even surface complete all as specified anddirected. |
| 38 | M&L for 75mm thick cement concrete 1:2:4,type B-1,(using 20mm graded crushed stone aggregate) as in levelling course of floors,finished even and smooth complete all as specified and directed. |
| 39 | Supply and fixing 20 mm nominal outer diaChlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed. |
| 40 | Supply and fixing GI tubes \"medium grade\" galvanised, 20 mm bore with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 41 | Supply and fixingRotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified and directed. |
| 42 | Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms). |
| 43 | S&F in repair 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 44 | Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen orlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mmbowl size 410mm x 330mm x 160mm complete with waste coupling & PVC waste pipe complete all as specified and directed. |
| 45 | M&L for Machine cut cudappah stone slab 20-25mm thick laid over and including 15mm thick screed bed in CM (1:6) base,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 46 | M&L 16 to 18mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick rendering CM (1:4) complete all as specified and directed. |
| 47 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 48 | Excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance not exc 50m and making good complete all as specified and directed |
| 49 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thickof an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 50 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thickof an colour having tensile strength of 550Mpa as in ridge ,valley gutter etc andfixed with self tapping screws and flat ironcomplete all as specified and directed. |
| 51 | S&F CP brass stop cock/Angle valve 20mm of CPVC pipe/15mm dia of G.I. pipe fancy type,chromium plated with long shank and cup concealed type complete all as specified and directed. |
| 52 | S&F in repair CP Bib taps, fancy type, chromium plated,cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe of 20mm nominal outer dia/15mm dia of iron pipeor for brass ferrule and fixed all as specified complete all as specified and directed. |
| 53 | S/F steel works in tubular truss, purlins, post etcincluding special shaped washers complete using ERW or induction butt welded tubes conforming to I.S. 1161 -1979 grade St-240 including one shop coat of Zinc Chromate Primer paint at contractor workshop before fabrication complete all as specified and directed. |
| 54 | Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and as directed. |
| 55 | M&L for providing, cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed. (the rates include for use of formwork)) |
| 56 | M&L forPCC (1:3:6) type C-2 (using 40mm graded aggregate) as in concrete bed to drain pipes of 150 mm dia, including packing under and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and directed. Note:-Thickness of PCC below the pipe should not be less than 100mm. |
| 57 | M&L for Reinforced concrete pipes of dia 150mm, class NP2, laid and jointed complete with collars etc, complete all as specified and directed. |
| 58 | M&L for Precast reinforcedcement concrete(1:2:4) type B-1( 20 mm graded crushed stone aggregate) nominal mix as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs and similar articles with plain faces as specified in clause No 4.11.16 of SSR Part-I (2009), set in cement mortar (1:4) complete all as specified and directed. |
| 59 | Cutting into existing manholes for connecting new drains of 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required, complete all as specified and directed. |
| 60 | M&L for PCC (1:2:4)type B-0 using 12.5mm graded stone aggregate as in coping, side kerbs, mud stops etc complete all as specified and directed. |
| 61 | M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base, flooring & surface finish etc for 100 mm thickness complete all as specified and directed. |
| 62 | M&L for precast factory made designer tiles (Rectified interlocking tiles)300x300mm glazed topmade in whitecement and pigment base of thickness not less than 19mm in differentcolourand pattern(compressive strength not less than 250 kg/sqcm) set and jointed in neat cement slurry (colour and pattern as per sample kept in GE office as approved by GE) over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 63 | M&L for plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate asin lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benchingand similar work including necessary form work complete all as specified and directed. |
| 64 | M&L for finishing wall with Acrylic smooth exterior paint of required shed on new surfaces (Two or more coats applied @ 3.28 ltr/10Sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10Sqm over including 1mm thick wall care puttycomplete all as specified and directed.(Note :- Priodical work to be excuted by authoried aplicator of painting). (Make:- M/s Asian Paints/Nerolac/Berger or equivalent). |
| 65 | M&L for Providing 40 mm thick precast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate loures and jallies,in cluding all moulding but excluding frame complete all as specified and directed |
| 66 | Supply & filling of baby chips of 6mm grade40mm thick including spreading and levelling complete all as specified and directed. |
| 67 | M&L for 60mm thickness, M-35 Grade machine pressed precast concrete interlocking paver block of any shape and size jointed and painted with grey cement & pigment confirming to IS 15658-2006 over and including 20mm thick screed bed in CM (1:4) complete all as specified and as directed |
| 68 | Precast cement concrete kerb stone in Type B1(1:2:4) 20mm graded stone aggregate complete all as specified and directed. |
| 69 | M&L for two coats of cement base paint over a coat ofalkali-resistant priming paint including preparation of surfaces complete all asspecified and as directed |
| 70 | M&L for outdoor Duracrete tiles glossy finished, 300mm x 300mm x 20mm thick, heavy duty tiles ;laid over and including 25 mm thick PCC (1:2:4) Type B1 using 20mm graded stone aggregate and 15 mm thick screed bed in cement mortar (1:6) set jointed and pointed in neat cement slurry with white/grey cement mixed with admixture or pigment to match the shade in floors, cut and polished complete all as specified and directed. |
| 71 | M&L for Brick work with old size flyash bricks straight or curved on plan exc 6m nean radiusand setting in cement mortar (1:6) complete all as specified and directed. |
| 72 | S&F Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment. |
| 73 | M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 74 | M&L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt gradein non metallic rigid PVC concelled conduit medium grade not less than 20 mm dia with all accessorieswith suitable size of module metal flush boxes and including modular front coverplate & back plate for mounting modular type switches /socket/fan/ regulator etcincluding provision of one single corePVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dollyswitch board complete for following :-One light point controlled by one switch SP 5 Amps ,240 VMake-Polycab/Finolex/Plaza/RR kabels or equivalent |
| 75 | One fan point controlled by one switch SP 5 Amps ,240 V |
| 76 | One 3 pin 5 amps socket point on same board |
| 77 | All as per the item no 1 herein before but with 2.5 sqmm conductor for5 pin 15 Amps switch socket outlet. |
| 78 | One 3 pin 5 amps switch socket outlet point on independent board |
| 79 | S&F switch modular type 1 module single pole, one way 5 AmpsMake- Goldmedal/Crabtree(Havells)/L&T or equivalent as written approval by GE |
| 80 | S&F socket outlet 2 in 1, 3 pin, 5Amps modular type 2 moduleMake- Goldmedal/Crabtree(Havells)/L&T or equivalent as written approval by GE |
| 81 | S&F switch modular type 1 module single pole, one way 15 AmpsMake- Goldmedal/Crabtree(Havells)/L&T or equivalent as written approval by GE |
| 82 | S&Fsocket outlet 2 in 1, 5 pin, 15Amps modular type 2 module.Make- Goldmedal/Crabtree(Havells)/L&T or equivalent as written approval by GE |
| 83 | M&L ceiling rose,PVC/polycarbonate, isolated bodyall as specified and directed. |
| 84 | S&F Submain wiring with two single core PVCinsulated FRLS-H multistrand copper conductor cable of size 4 Sq mmdrawn into and including non metallic medium duty rigid concealedPVCcondute not less than 20/ 25mm size ISI markedwith allfittings / accessories and 4 Sq mm FRLS-H multistrand copper conductorcable as continuous earth wire complete.Make- Polycab/Finolex/Plaza/RR kabels or equivalent as written approval by GE(Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesis deemed to be included in the unit rate quoted for this items.) |
| 85 | S&F Sheet metal enclosure 4 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed.Make- Indoasian/L&T/Legrand or equivalent as written approval by GE |
| 86 | S&FMCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C\" curved type complete all as specified and directed. Make- Indoasian/L&T/Legrand or equivalent as written approval by GE |
| 87 | S&F MCBsingle pole, 6 to 32Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make- Indoasian/L&T/Legrand or equivalent as written approval by GE |
| 88 | Supply and fix angle holder backlite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductor all a s specified and directed.Make- Phillips/Havells/Bajaj or equivalent as written approval by GE |
| 89 | Supply and fix LED light fittings 20 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete .Make :- Havells/Philips/Bajaj cat part No-LUMILINESMART 20WLED865PCWH or equivalent as written approval by GE |
| 90 | Supply & fix exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm including making holes and brick work,plastering for making good the disturbed surface and match the colour as per existing all as specified and directed. Make-Phillips, Havells,Bajaj,Usha or equivalent as written approval by GE |
AI Tender Summary
Tender Timeline
Nov 14, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 21, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 21, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender