Power Government Departments Closing in 0 days TDR #45922754

Tender For Structural Rehabilitation Work And Improvement Of Resevoir,Dam,Outlet And Basic Facilities Of Myntdu Leshka Stage-I Dam In West Jaintia Hills District Of Meghalaya Under Drip-Ii(Package Viii).

Issued by Government Departments · East Khasi Hills, Meghalaya
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jan 2025
0 days left
EMD
8.47 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Structural Rehabilitation Work And Improvement Of Resevoir,Dam,Outlet And Basic Facilities Of Myntdu Leshka Stage-I Dam In West Jaintia Hills District Of Meghalaya Under Drip-Ii(Package Viii).

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 07-Nov-2024 Notice for Pre Bid Meeting Other 09-Dec-2024
2 05-Dec-2024 Notice of Technical Bid Opening of Package VIII Other 09-Dec-2024
3 09-Dec-2024 Date Extension for Package VIII Date 09-Jan-2025

BOQ

Name of Work:Structural Rehabilitation work and Improvement of Reservoir, Dam, Outlet and Basic Facilities of Myntdu Leshka Stage-I Dam in West Jaintia Hills District of Meghalaya under DRIP-II (Package-VIII)
Sl. No. Item Description
1Construction of step concrete wall near intake at Left bank collapsed on 20th July 2019 near intake of Myntdu Leshka Dam.
2Earthwork in excavation for structures. BY MANUAL MEANS in Ordinary Soil.
3Supplying fitting and placing HYSD bar reinforcement (Fe 415) in Substructure complete as per drawing and Technical direction of the Engineer-in charge.
4Plain/reinforced cement concrete in sub-structure complete as per drawings and Technical Specificationand direction of Enginner-in-charge inP.C.C. grade M20 (1 : 1.5 : 3) Nominal mix Upto 5 m Height.
5Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and direction of the Engineer-incharge.
6Construction of step stone masonry wall above staff quarter near view point at Right bank.
7Earthwork in excavation by Mechanical means up to a depth of 2 in below the existing ground level tor foundation, trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils. In All kinds of soil (ordinary soil/ hard soil/ dense soil).
8Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
9Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in:Cement mortar 1 :6 (1 cement: 6 coarse sand).
10Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
11Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50 in and lift up to 1.5 m.With available excavated earth.
12Construction of step stone masonry wall below staff quarter near DG set at Right bank of Myntdu Leshka Dam.
13Earthwork in excavation by Mechanical means up to a depth of 2 in below the existing ground level tor foundation, trenches Of foundations, footings Of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification Of soils.In All kinds of soil (ordinary soil/ hard soil/ dense soil).
14Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): In mix 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
15Plandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in: Cement mortar 1:6 (1 cement: 6 coarse sand).
16Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (using steel).
17Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 in and lift up to 1.5 m:With available excavated earth
18Pointing on stone work with cement mortar 1 :3 (1 cement: 3 fine sand): Flushed/ Pluled pointing.
19Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) : Thermo-Mechanically Treated bars (TMT bar).
20Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: Mix M20 or 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
21Providing and fixing hand rail of approved size bywelding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: G.I. pipes.
2212 mm cement plaster of mix: 1 :4 (1 cement: 4 fine sand).
23Construction of step protection wall below DG set at right bank of Myntdu Leshka Dam.
24Earthwork in excavation by Mechanical means up to a depth of 2 m below the existing ground level for foundation, trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.In All kinds of soil (ordinary soil/ hard soil/dense soil).
25Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): In mix 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
26Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in: Cement mortar 1:6 (1 cement: 6 coarse sand).
27Centering and shuttering lncludlng strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
28Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m:With available excavated earth.
29Reconstruction of grill railing at top of retaining wall constructed at the area of masonry wall collapsed on 20th July 2019 near intake of Myntdu Leshka H.E Project.
30Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required):Thermo-Mechanically Treated bars (TMT).
31Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: In mix M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
32Steelwork welded in built-up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat Of approved steel primer using structural steel etc. as required: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
33Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:In Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
34Construction of protection/step stone masonry wall in the reservoir rim at Left bank of Myntdu Leshka Dam,upstream of the Dam (Part-I)
35Earthwork in excavation by Mechanical means up to a depth of 2 m below the existing ground level tor foundation, trenches Of foundations, footings Of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification Of soils. In All kinds of soil (ordinary soil/ hard soil/dense soil).
36Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): In mix 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
37Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in:Cement mortar 1 :6 (1 cement: 6 coarse sand).
38Centering and shuttering including strutting, propping etc. and removal of form for allheights complete and as directed by Engineer in charge. In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (using steel).
39Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) : Thermo-Mechanically Treated bars (TMT).
40Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: In mix M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)
41Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.With available excavated earth.
42Construction of protection/step stone masonry wall in the reservoir rim at Left bank of Myntdu Leshka Dam,upstream of the Dam (Part-II)
43Earthwork in excavation by Mechanical means up to a depth of 2 m below the existing ground level tor foundation, trenches Of foundations, footings Of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification Of soils.In All kinds of soil (ordinary soil hard soil/dense soil).
44Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): In mix 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
45Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in: Cement mortar 1 :6 (1 cement: 6 coarse sand).
46Centering and shuttering including strutting, propping etc. and removal of form for allheights complete and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
47Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars (TMT).
48Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: In mix M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
49Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.With available excavated earth.
50Construction of protection/step stone masonry wall in the reservoir rim at Left bank of Myntdu Leshka Dam, upstream of the Dam (Part-III)
51Earthwork in excavation by Mechanical means up to a depth of 2 m in below the existing ground level tor foundation, trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.All kinds of soil (ordinary soil/ hard soil/dense soil)
52Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately):In mix 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
53Plandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level in: Cement mortar 1 :6 (1 cement: 6 coarse sand).
54Centering and shuttering including strutting, propping etc. and removal of form for allheights complcte and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (using steel).
55Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) : Thermo-Mechanically Treated bars (TMT).
56Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: In mix M20 or 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
57Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m:With available excavated earth.
58Repairing of second stage concreting in Block-out in chute spill way using high strength M90 concrete(local areas)over the existing eroded surface after application of bonding agent at Myntdu Leshka Dam.
59Providing and laying of high strength concrete M90 grade concrete as per specification & direction of E/I proper compaction, curing with all lead and lift,ensuring adequate mix desing and quality Control for testing as IS Standard & Technical specification, complete finish items including supply of all materials, Labour, T&P etc. required for proper completion of work.
60Providing topping with fresh Concrete M60 grade concrete at Myntdu Leshka Dam top.
61Providing and laying of high strength concrete of M60 grade concrete as per specificationproper compaction, curing with all lead and lift, ensuring adequate mix design and Quality Control for testing as IS Standard & Technical specification, complete finish items including supply of all materials, Labour, T&P etc. required for proper completion of work.
62Repairing Of Gallery Drain Including Hand Railing and Making V-Notch Inside The Gallery.
63Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in PICC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge:Up to and including 12 mm dia.
64Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars (TMT)
65Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
66Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. In G.I. pipes.
67Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: In mix M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
6812 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand).
69Applying one coat of water thinnable cement primer of approved brand and manufacture on surfaces:Water thinnable cement primer
70Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation Of surface, etc. complete: On concrete work.
71Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
72Structural steel work in single section, fixed with or without per kg 117.00 connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Chequer Plate 6mm x 240 x 1200.
73Providing and laying cement concrete in retaining walls ctc and all works above plinth level such as pilasters, columns, pillars, posts, struts, buttresses, parapets, coping, plaln window sills, fillets, sunken flcor etc,, up to first floor level, excluding the cost of centering, shuttering and finishing.1 :1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
74Providing and {ixing in position collapsible steel shutters with vertical channels 20xl0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia. steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
75Repairing HPSV/MH Fitting Junction Boxes and associated auxiliaries to replaced the damaged top lantern poles and fixture:
76Supplying fitting and fixing of LED Lightings complete: With LED Street Light- Rodeo Series 25-150W.
77Providing and laying connection testing & commissioning of the following sizes of 1100V grade aluminium conductor armoured underground cable & overall PVC sheated cables as per ISI code in trenches including the cost of digging the trenches sand cushioning with laying etc and refilling the samein layers or by supporting them in walls and all other accessories as required.
78Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required:With 200 mm x 150 mm x 75 mm deep.
79Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: Single pole.
80Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required: Above 4.5 metre and upto 6.5 metre.
81Repairing of intrenal electrification with water proof wire, socket, switch, MCB, etc. inside Gallery.
82Wiring for group controlled (looped) light point/fan point/exhaust fan point/call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit,and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required: (long point wiring).
83Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
84Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (long Point Wiring).
85Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required: With 4 X 10 sq. mm + 2 X 6sq. mm earth wire.
86Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required: With 125 ATP&N.
87Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete withtesting and commissioning etc.as required: For 4 way, Double door TPN MCBDB .
88Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: With Single pole and nuetral.
89Supplying and fixing PVC batten/ angle holder including connections etc. as required.
90Repairing of illumination system in the Walkway Downstream of the Dam.
91Supplying fitting and fixing of LED Lightings complete:LED Street Light- Rodeo Series: 25-150W.
92Supplying fitting and fixing of LED Lightings complete:LED Beam/Flood Lights- Rayon Series: 90-200W.
93Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required: With 200 mm x 150 mm x 75 mm deep.
94Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required: With 2 x 4 sq. mm + 1 x 4 sq. mm earth wire.
95Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required: With 4 x 6 sq. mm.
96Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: With 63 amp.
97Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.
98Providing safety railing and drilling of drain holes at horizontal girder including welding works in the bottom most of radial gate\"s arm.
99Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: G.I. pipes.
100Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, includingscaffolding:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
101Providing Drain holes In Sluice Radial Gates Gate 50mm by Gas Cutting in every Seal Assembly.
102MS Plates/Steel section (Gr.A) for E.P. Filling back the Cutting area in Sluice Radial Gate Arms.MS Plate 35mm.
103Providing Approach Stairway/Walkway to reach Bucket Lip (Right Bank).
104Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth Of 100 mm up to 200 mm in PICC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge:Up to and including 12 mm dia.
105Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars (TMT).
106Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).
107Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
108Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Stairs/ spiral staircase, (excluding landings) (using timber).
109Providing and fixing hand rail of approved size bywelding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: M.S. tube.
110Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: In mix M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
11112 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand).
112Applying one coat of water thinnable cement primer of approved brand and manufacture on surfaces:Water thinnable cement primer
113Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work.
114Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
115Providing Approach Stairway/Walkway to reach Bucket Lip (Left Bank)
116Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septictank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils. In All kinds of soil (ordinary soil/ hard soil/ dense soil).
117Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level : in Cement mortar 1 :6 (1 cement: 6 coarse sand).
118Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size).
119Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth Of 100 mm up to 200 mm in PICC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge: Up to and including 12 mm dia.
120Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars (TMT)
121Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge.Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick.
122Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by the Engineer in charge.Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).
123Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge.Square, rectangle, polygonal in plan or any shape liike Tee/L etc., having plane vertical face.
124Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge..Stairs/ spiral staircase, (excluding landings) (using timber).
125Providing and fixing hand rail of approved size bywelding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: M.S. tube .
126Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
127Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: In M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
12820 mm cement plaster ofMix 1 : 4 (1 cement: 4 fine sand).
129Applying one coat of water thinnable cement primer of approved brand and manufacture on surfaces:Water thinnable cement primer
130Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation Of surface, etc. complete: On concrete work.
131Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
132Construction of roof covering of Gantry crane including walling at Intake gate of Myntdu Leshka Stage-I.
133Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
134Providing corrugated G.S. or galvanised iron sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in Horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever require 1.00 mm thick with zinc coating not less than 275 gm/m².
135Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m².
136Painting on G.S Sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: In New work (Two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
137Providing high strength M90 grade concrete in the chute spillway and spillway crest for repair of Myntdu Leshka Dam.
138Providing and laying of high strength concrete M90 grade concrete as per specification & direction of E/I proper compaction, curing with all lead and lift, ensuring adequate mix design and quality Control for testing as IS Standard & Technical specification, complete finish items including supply of all materials, Labour, T&P etc. required for proper completion of work.
139Making platform and steps required to facilitate the people to reach the spillway crest level.
140Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete G.I.Pipes.
141Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer: M.S. tube.
142Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete: On steel work
143Construction of Drinking Water Source for Myntdu Leshka Dam at Myntdu Leshka Dam Site (Right Bank).
144Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: In all kind of soil.
145Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: In all kind of soil.
146Providing and laying cement concrete in rctaining walls ctc and all works above plinth level such as pilasters, columns,pillars, posts, struts, buttresses, parapets, coping, plain window sills, fillets, sunken flcor etc., up to first floor level, excluding the cost of centering, shuttering and finishing in mix 1 :2:4 (1 Cemem: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
147Providing and laying cement concrete in rctaining walls ctc and all works above plinth level such as pilasters, columns, pillars, posts, ruts,buttresses, parapets, coping, plaln window sills, fillets, sunken flcor etc,, up to first floor level, excluding the cost of centering, shuttering and finishing in Mix M20 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
148Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Mild steel and Medium Tensile steel bars (TMT).
149Centering and shuttering including strutting, proppingetc. and removal of form for all heights complete and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (using steel).
150Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)
151Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: In mix proportion 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
152Cement plaster in mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
153Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. External work: 40 mm diameter nominal bore.
154Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. External work: 52 mm diameter nominal bore.
155Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. External work: 80 mm diameter nominal bore.
156Construction of Drinking Water Source for Myntdu Leshka Dam at Myntdu Leshka Dam Site (Left Bank).
157Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m In All kind of soil.
158Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In All kind of soil.
159Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measuredand paid separately).In mix 1:2:4 (1 Cemem: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
160Supplying, fitting and fixing in position reinforcement bars upto lst floor level, conforming to relevant I.S. Code for Ft.C.C.work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details,supplying and binding with 20 G annealed black wire andplacing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Mild steel and Medium Tensile steel bars.
161Centering and shuttering including strutting, proppingetc. and removal of form for all heights complete and as directed by Engineer in charge: Foundations, footings, bases of columns, etc. for mass concrete (using steel).
162Centering and shutterlng including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge. In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
163Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
164Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : In mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
165Cement plaster in mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 20 mm cement plaster.
166Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. In External work.50 mm diameter nominal bore
167Providing and fixing G.I. pipes complcte with G.I. fittings including trenching and refilling etc. In External work.80 mm diameter nominal bore.
168Construction of Drinking Water Storage Tank and Pipe Line From Storage Tank to Dam Control Room (Right bank ).
169Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m. In All kinds of soil.
170Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m:In All kinds of soil.
171Providing and laying cement concrete in rctaining walls ctc and all works above plinth level such as pilasters, columns,pillars, posts, struts, buttresses, parapets, coping, plain window sills, fillets, sunken flcor etc,, up to first floor level, excluding the cost of centering, shuttering and finishing: In mix 1:2:4 (1 Cemem: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
172Supplying, fitting and fixing in position reinforcement bars upto lst floor level, conforming to relevant I.S. Code for Ft.C.C.work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lapping, hooks, chairs, anchorage etc., and no measurement for the same is required)Mild steel and Medium Tensile steel bars (TMT).
173Centering and shuttering including strutting, proppingetc. and removal of form for all heights complcte and as directed by Engineer in charge. In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
174Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stoneaggregate 20 mm nominal size).
175Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : In Mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
176Cement plaster in mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster.
177Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore.
178Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 32 mm dia nominal bore.
179Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
180Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore
181Construction of Drinking Water Storage Tank and Pipe Line From Storage Tank to Dam Control Room (Left bank).
182Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. In All kinds of soil.
183Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In All kinds of soil.
184Providing and laying cement concrete in rctaining walls ctc and all works above plinth level such as pilasters, columns,pillars, posts, struts, buttresses, parapets, coping, plaln window sills, fillets, sunken flcor etc,, up to first floor level, excluding the cost Of centering, shuttering and finishingIn mix M20 or1:2:4 (1 Cemem: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
185Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C.work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Mild steel and Medium Tensile steel bars.
186Centering and shuttering including strutting, proppingetc. and removal of form for all heights complete and as directed by Engineer in charge:In Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc (using steel).
187Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
188Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : In Mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
189Cement plaster in mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement:20 mm cement plaster.
190Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for External work.50 mm diameter nominal bore.
191Providing and fixing gun metal gate valve with C.I, wheel of approved quality (screwed end): 50 mm nominal bore.
192Dismantling of Existing Stone Masonry Guard Wall and Providing New Pipe Railing at Right Bank of Myntdu Leshka Dam.
193Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
194Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
195Providing and laying cement concrete in retaining walls etc., and all works above plinth level such as pilasters, columns, pillars, posts, struts, buttresses, parapets, coping, plain window sills, fillets, sunken flcor etc., up to first floor level, excluding the cost of centering, shuttering and finishingIn Mix M15 or 1:2:4 (1 Cemem: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
196Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs,spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required):Thermo-Mechanically Treated bars (TMT).
197Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports,chairs,spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required)Mild steel and Medium Tensile steel bars.
198Centering and shuttering including strutting, proppingetc. and removal of form for all heights complete and asFoundations, footings, bases of columns, etc. for mass Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
199Centering and shuttering lncludlng strutting, proppingetc: Columns, Pillars, Piers, Abutments, Posts and struts (usingsteel).
200Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: In mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
201Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer G.I. pipes
20212 mm cement plaster of mix : 1 cement: 4 fine sand.
203Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
204Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.84 ltr/10 sqm).
205Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. Complete: On steel work.
206Repairing of existing side drain and masonry wall at Right bank of Myntdu Leshka Dam.
207Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. In All kinds of soil.
208Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: In Mix proportion 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
209Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand).
21020 mm thick of mix: Mix 1:4 (1 cement: 4 fine sand).
211Painting of water level pillar at both Left and Right bank Pillar of Myntdu Leshka Dam.
212Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
213Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete: On concrete work
214Printing New Letters and Figures of Any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per Technical Specification: English and Roman Hyphens, commas and the like not to be measured and paid for. Detail for 100 letters of 100 cm height i.e 1.60 m or 1600 cm: For Right Bank (20cm Height).
215Printing New Letters and Figures of Any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per Technical Specification: English and Roman Hyphens, commas and the like not to be measured and paid for. Detail for 100 letters of 100 cm height i.e 1.60 m or 1600 cm: For Dots & Arrow (5cm Height).
216ProvidingPipe Line Water for Water Supply From Source to Staff Quarter and Control Room at Myntdu Leshka Dam (Right Bank).
217Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In All kinds of soil.
218Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge. In Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel).
219Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage,lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): In Mild steel and Medium Tensile steel bars.
220Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: In mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
221Cement plasterin mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster.
222Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: 32 mm dia nominal bore.
223Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: 25 mm dia nominal bore.
224Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore
225Providing and fixing brass bib cock of approved quality:15 mm nominal bore.
226Providing and fixing brass stop cock of approved quality: 15 mm nominal bore.
227Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 25 mm nominal bore.
228ProvidingPipe Line Water for Water Supply From Source to Staff Quarter and Control Room at Myntdu Leshka Dam (Leftt Bank).
229Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. In All kinds of soil.
230Centering and shuttering including strutting, proppingetc. and removal of form for all heights complete and as directed by Engineer in charge: In Walls (any thickness) including attached pilasters, buttresses,plinth and string courses etc (using steel).
231Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage,lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Mild steel and Medium Tensile steel bars.
232Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: In Mix M20 or 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
233Cement plaster in mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster.
234Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore.
235Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 50 mm dia nominal bore.
236Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: 32 mm dia nominal bore
237Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.: 25 mm dia nominal bore.
238Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore
239Providing and fixing brass bib cock of approved quality :15 mm nominal bore.
240Providing and fixing brass stop cock of approved quality :15 mm nominal bore.
241Providing and fixing gun metal gate valve with C.I. wheelof approved quality (screwed end): 80 mm nominal bore
242Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore
243Providing and fixing Sign board/name plates showing the salient feature of Myntdu Leshka Dam stage-I
244Printing New Letters and Figures of Any Shade: Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per Technical Specification Clause 1701: English and Roman: Hyphens, commas and the like not to be measured and paid for: Detail for 100 letters of 100 cm height i.e 1.60 m or 1600 cm.
245Supported on mild steel angle iron post 75 mm x 75 mm x 6 mm: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over Aluminium Sheeting 1.5 mm thick supported on a Mild Steel Angle Post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawing and directed by the Engineer Incharge.
246Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat Of approved steel primer using structural steel eta. as required: .ln gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.ISA 7575 : 75*75*6mm.
247Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils:In All kinds of soil (ordinary soil/ hard soil/ dense soil).
248Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
249Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars (TMT).
250Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
251Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge. Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
252Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 in and lift up to 1.5 m.With available excavated earth.
25312 mm cement plaster of mix: 1 :4 (1 cement: 4 fine sand)
254Turfing on both sides of the downstream at Myntdu Leshka Dam Stage-I:
255Downstream Turfing:-Sodding the slopes with grass seeds including raising and preparing groung spreading a layer of good earth upto a depth of 300mm (average) wherever required (cost of earth included) watering rolling etc.complete as per direction within a initial leadof 50 meters and lift of 1.5 meters (for additional leads and lifts,paymentare to be madeas per the related earthwork items).
256Renovation of Inspection Bungalow of Myntdu Leshka H.E. Project at Thamar.
257Renovation of Doors, Windows and Ventilators at Ground Floor Level of Inspection Bungalow Thamar.
258Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc complete and stacking within 50 metres lead: of area beyond 3 sqm.
259Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make contorming to ls:733 and ls:1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately): For shutters of doors and windows and ventilators including providing hinges/pivots and making provision for fixing of fitting wherever required including the caused EPDM rubber/neo print gasket required (fitting shall be paid seperately). Anodised aluminium (anodised transparent or dyed to required shade according to ls:1868, Minimum anodic coating Of grade AC 15).
260Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
261Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes.
262Finishing walls with toxtured exterior paint of required shade, including scaffolding: Old work ITwo or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.
263Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smcoth complete.
264Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Two or more coats applied on walls @ 1.25 Itr/10 sqm over sqm 128.00 and including one coat of Special primer applied @ 0.75 ltr/10 Sqm
265Renovation of Sanitary Fittings at Ground Floor Level and Water Supply Pipe Lines at Inspection Bungalow Thamar.
266Providing and fixing CP Brass Single lever telephonic wall mixer quality & make as approved by Engineer - In - Charge.
267Providing and fixing c.P. brass shower rose with 15 or 20 mm inlet: 100 mmm diamete.
268Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP Brass single hole basin mixer Of approved quality and make, including painting Of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer: 15 mm nominal bore
269Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception Of pipes and fittings:
270Providing and Fixing P.V.C waste pipe for sink and wash basin including P.V.C. waste fitting complete: Flexible Pipe:32 mm dia and 40 mm dia.
271Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
272Providing and Fixing plain of required degree with cast iron S&S as per IS: 1729 : 100 mm dia.
273Providing and fixing brass bib cock of approved quality: 20 mm nominal bore, 120 mm long, weighing not less than 198 gins.
274Providing and fixing toilet paper holder : C.P. Brass.
275Providing and fixing PTMT towel ring t Tapezoidal shape 215 mm long, 200 mm wide with minimilm distances of 37 mm from wall face with concealed fittings arrangemem Of approved quality and colour, weighing not less than 88 gins.
276Providing and fixing PTMT towel rail complete with brackets fixed to wcoden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm.
277Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall Of standard shape with bracket Of the same materials with snap fittings of approved qualfty and colour, weighing not less than 105 gins.
278Providing and fixing 600×450 mm bevelled edge mirror of superior glass (or approve quality) complete with 6mm thick hard board ground like wooden cleats with C.P. Brass screws and washer complete.
279Providing and fixing 600×120×5 mm glass shelf with edges round off supported and nodised alluminium anngle frame C.P. brass bracket Guard rail complete fixed with 40mm long screws rawl plug ext complete.
280Providing and fixing door piece, insertion rLibber washer 3mm thick, bolts & nuts complete with sand cast iron S&S as per direction of the Engineer Incharge.
281Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc, with 20 mm nominal outer diameter pipes.
282Providing Cement Concrete Topping including Water Proofing Course at Roof Level and Repairs to Plaster in Parapet Wall of Inspection Bungalow Thamar.
283Hacking of CC flooring including cleaning for Surface etc. complete as per direction of the Engineer-in-Charge.
284Dismantling 15 to 40 mm dia. G.I, pipe including slacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge; Internal Work- Exposed on wall.
28565 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1 :2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 15 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture\"s specifications. This includes cost of cement slurry, complete.
286Repairs to plaster ot thickness 12 mm to 20 mm in patches Of area 2.5 sqm and under, including cutting the patch in proper shape, ral
287Electrification at Ground Floor Level of Inspection Bungalow Thamar including Street Lighting in IB compound.
288Supplying fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Bulb : 40 W
289Supplying fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Candle LED Bulb: 5 W
290Supplying fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Filament LED Bulb: 8 W
291Supplying fitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Emergency LED Bulb:9 W
292Supplying fitting, fixing of LED RETROFIT LAMPS surface or wall mounted with all necessary accessories:Regal battern for LED Tube Light (Universal batten for T-5 & T - 8 Lamps:8 upto 2×22W
293Supplying fitting, fixing of LED RETROFIT LAMPS surface or wall mounted with all necessary accessories:Crystal Glass LED Tube Light (Double Size Connection):18 W
294Supplying fitting and fixing LED down light surface or wall mounted with all necessary accesories:Round Slim fit low profile down light are engineered to delivered superior light out put and uniformity using the latest aged - lit LED technology: 15 W Ceiling cut out Ø 180 mmheight 16 mm Round shape.
295Supplying fitting and fixing of Wall/Table Fan with all necessary attachments and accessories as required:400mm Wall Fan.
296Supplying fitting and fixing exhaust fan double bearing self duplicating type single phase 50Htz 250 V AC Operated complete with supporting frame fan blade nuts and bolts and others petty as accesories required:Domestic exhaust Fan:Metal Exhaust Fan 225 mm.
297Supplying fitting and fixing waterheater (Geyser) of 1.5 Kw/with pressure value including all necessary accesirie required: 35 Litres Capacity.
298Aesthetically designed decorative hot dipped galvanized mild steel step pole with grey powder finished, plasma cut and duly chamfeared opening window of 300 × 110 mm for terminal connection and mounting accessories window cover is fitted with allen screw to the pole: 4 metre poles.
299Drawing of 3 phase main line with DGSD approved VIR or PVC 660 volt grade copper conducter in casing caping with all accessories: With 4 × 10 mm2 Copper conductor.
300Supplying and fixing load kontaket miniature circuit Brakes RX3: Single pole MCB: 6 - 32 Amp.
301Supplying and fixing load kontaket miniature circuit Brakes RX3: Tripple pole MCB:6 - 32 Amp
302Supplying fitting and fixing of RX3 Isolator (35 sq. mm cage terminals with safety shutters): Double Pole: 40 Amp.
303Supplying fitting and fixing of Distribution board ETPN DB\"s for MCB, Isolator, RCCB and RCBO: IP 30 # 1k 08 Mouble Pole.
304Supplying fitting and fixing earthing with G.I. pipe of 200cm lay 40\" dia icluding all accessories & providing masonry enclosure with cover plate having locking arrangement etc with charcoal salt complete as required: G.I. Pipe.
305Supplying fitting and fixing earthing with copper Plate 600 × 600 mm × 6mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salt etc complete as required: Copper earth plate electrode.
306Security Outpost at the Entrance to Inspection Bungalow Thamar.
307Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils: In All kinds of soil (ordinary soil/ hard soil/ dense soil).
308Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing thesubgrade as directed including all labour and materials and if necessary dewatering, complete: Stone soling.
309Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): In Mix 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).
310Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C.work/ a.a. walling including straightening, cleaning, cuttingand bending to proper shapes and length as per details,supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): High Yield Strength Deformed bars.
311Centering and shutteilng including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge:In Foundations, footings, bases of columns, etc. for mass concrete (using steel).
312Providing and laying in position specified grade of reinforced cement concrete, excluding the cost Of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: In M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
313Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1 :6 (1 cement: 6 coarse sand)
314Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation otc in layers not exceeding 20 cm thick including breaking Of clods, consolidating each layer by ramming and watering, lead up to 50 in and lift up to 1.5 m:With borrowed earth/stone dust carriage up to 5 Km.
31565 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1 :2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 15 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture\"s specifications. This includes cost of cement slurry, complete.
316Brick work in cement mortar with first class brick in superstructure above plinth level up to first floor level in all shapes and sizes: In Cement mortar 1:6(1 cement: 6 coarse sand.
317Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required diameter and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and panelling to be paid for separately): For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to ls:1868, Minimum anodic coating of grade AC 15).
31812 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand)
319Boundary Fencing for Inspection Bungalow at Thamar.
320Applying priming coat:With ready mked pink or Grey primer Of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.
321Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation Of surface, etc. complete: On steel work.
322Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation Of surface, etc. complete: On concrete work.
323Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per loo in (minimum), between the two posts fitted and fixed with G.I. staples, turn bucl(les etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used: With G.I. barbed wire.
324Transit Camp at Myntdu Leshka Stage-I HEP
325Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils with All kinds of soil (ordinary soil/ hard soil/ dense soil).
326Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete with Stone soling 100mm.
327Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1 :6 (1 cement: 6 coarse sand).
328Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) with 1 :3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
329Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm thick including breaking of clods, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m With available excavated earth.
33065 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1 :2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 15 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture\"s specifications. This includes cost of cement slurry, complete.
331Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) with Thermo-Mechanically Treated bars.
332Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Foundations, footings, bases of columns, etc. for mass concrete (using steel).
333Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).
334Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Columns, Pillars, Piers, Abutments, Posts and Struts (using steel).
335Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: M20 or 1:11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
336Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns,pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size).
337Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first floor level, excluding the cost of centerlng, shuttering, finishing and reinforcement: M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)
338Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc„ including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
339Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch Of corrugation as approved by Engineer-in-charge) 0.50 mm(+O.05 a/o) total coated thickness with zinc coating 120 grams per sqm as per ls:277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side of the shect and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 mcter or as desired by Engineer-in charge. The sheet shall be fixed using selfrdrilling/ self tapping screws of size (5.5x55 mm) with EPDM seal,complete up to any pitch in horizontav vertical or ciirved surfaces, excluding the cost of purlins. rafters and trusses and including cutting to size and shape wherever required.
340Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 : Plidges plain (500-600mm)
341Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 : Gutter (600 mm over all girth)
342Providing wood work in frames of false ceiling, partitions, etc. sawn and fixed in position with necessary stainless steel screws ctc. With lst class Local wood Pooma/ Hollock/ Gamari and the like
343Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Natural colour insulating board 12 mm thick.
344Half brick masonry with common burnt clay (non modular) 1st class bricks in superstructure above plinth level up to first floor level: Cement mortar 1 :4 (1 cement: 4 coarse sand)
345Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length With Teak wood / Sissu wood.
346Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) With Teak wood / Sissu wood, 35 mm thick shutters.
347Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing: Openable.
348Providing and fixing M.S. grills Of required pattern in trames Of windows, etc. with M.S. flats, square or round bars, etc. including priming coat with approved steel primer all complete Fixed to openings/ wooden frames with rawl plugs screws etc.
349Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to ls:7231, with all fi\"ngs and fixtures complete. including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C, pan of size 580x440 mm with integral type foci rests.
350Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P, flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials Of standard make and mosquito proof coupling Of approved design complete, including painting Of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lsl marked white solid plastic seat and lid.
351Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. including painting of fittings and brackcts, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
352Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. including painting of fittings and brackcts, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
353Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per ls:13983 with C.I. brackets and stainless steel plug 40 mm, including painting Of fittings and brackets, cutting and making gcod the walls wherever required : Kitchen sink with drain board 510xl040 mm bowl depth 250 mm
354Providing and fixing CP brass Single Lever Telephonic wall mixer of quality & make as approved by Engineer-in-charge.
355Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washer complete.
356Providing and fixing toilet paper holder: C.P. brass
357Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer diameter pipes.
358Providing and fixing brass bib cock of approved quality 15 mm nominal bore.
359Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter.
360Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:8931 15 mm nominal bore.
361Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 gins.
362Providing and laying vitrified floor tiles in different sizes (thickness to be specif led by the manufacturer) with water absorption less than O.08°/o and conforming to ls:15622, of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc„ complete Size of Tile 600x600 mm.
363Tile work in skirting, risers of steps and dado up to 2 in height over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm., including pointing in white cement mixed with pigment of matching shade complete.
36412 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand)
365Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer
366Applying priming coat:With ready mked pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood
367Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Painting wood work with Deluxe Mufti Surface Paint of required shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 Itr/10 sqm of approved brand and manufacture.
368Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
369Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 5.5 mm thick glass panes
370A. SEPTIC TANK
371Earthwork in excavation by Mechanical means up to a depth of 2 in below the existing ground level tor foundation, trenches Of foundations, footings Of column/ walls,etaining walls,septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification Of soils. All kinds of soil (ordinary soil/ hard soil/dense soil).
372Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete with Stone soling 100mm.
373Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) with mix 1 :3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
374Brick work with common burnt clay modular ls\" class bricks in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand) From ground level up to plinth level
375Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) with Thermo-Mechanically Treated bars.
376Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required) with Mild steel and Medium Tensile steel bars
377Centering and shuttering lncluding struttlng, propplng etc. and removal of form for all heights complcte and as directed by Engineer in charge. Lintels, beams, plinth beams, girders, bressumers and cantilevers (using steel).
378Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge. Slabs, roofs, landings, balconies and access platform, shelves (using steel).
379Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first flcor level, excluding the cost of centerlng, shuttering, finishing and reinforcement. M20 or 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
38020 mm cement plaster of mix:1 :4 (1 cement: 4 fine sand)
381Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centerjng, shuttering, finishing and reinforcement- All work up to plinth level: M15 or Prop.1 :2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
382Providing and fixing soil, waste and vent pipes 100mm dia with Sand cast iron S&S pipe.
383Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100mm dia withSand cast iron S&S pipe.
384Constructing soak pit 1.20xl.20xl.20 in filled with brickbats including S.W. drain pipe100mm diameter and 1.20 in long complete as per standard design.
385B. INTERNAL WIRING
386Wiringin looping system with copper PVC cable 250/440 volt grade of size 1.5sqmm of approved quality using PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to the highest point : Wall Light point: short point wiring upto 3 mts.
387Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to a light Plug point when fixed elsewhere with continous earth wire complete:Short point wiring upto 3 mts.
388Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x4sqmm of approved quality using PVC casing capping including 15 amperes switch/socket Indian best quality complete to Power Plug point with continous earth wire complete : Short point wiring upto 3 mts.
389Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to Ceiling fan/ Exhaust fan point: Short point wiring upto 3 mts.
390Drawing of main and sub main line with DGSD approved VIR or PVC 250/440 Volts grade copper conductor in PVC casing complete with all accessories:With 2x4mm2 Copper conductor
391Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories:With 4x4mm2 Copper conductor
392Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories: With 4x16mm2 Copper conductor
393Supplying fitting andfixing of industrial type 15 Amp complete with all necessary accessories as required with 15 Amp type socket
394Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required:(75mmx75mm x 60mm deep)
395Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required:(100mmx100mm x 60mm deep)
396Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required: (150mmx75mm x 60mm deep)
397Suppying and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy haning shackle & 30mm length of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs 25.00/mtrs withAC ceiling Fan \"600\"mm sweep
398Supplying fittings and fixing complete heavy duty double break fuse switches- HBC fuse type in sheet enclosure 50 Hz.415V. 3 pole with Neutral (T.P.N): 63Amp capacity
399Supplying fitting and fixing of distribution board,ETPN DB\"s for MCB, Isolator, RCCB and RCBO: IP 30-#1K 08 with 8 ways 8+24 modules
400Supplying and fixing of load Kontaket Miniature Circuit Breakers DX3 MCB\"s for AC application till 63ADouble pole 415 V with 6-32 Amp
401Supplying fitting and fixingof DX3 Isolators for AC applications upto 125A Double pole 240 Vwith 63Amp
402Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 15 litres capacity.
403Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 3 litres capacity
404Supplying, fitting and fixing earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeetc. with charcoal/ coke and salt etc complete as required
405Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories:Bulb 23W
406Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Bulb3W
407Supplyingfitting fixing of LED batten surface or wall mounted with all necessary accessories: with polycarbonate housing & integrated electronic driver with 20W (1150x 25x40mm)
408Suppling fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories: 2x2 (595x595x65)mm luminaire 24W
409Supply, installation, testing & commisioning of advanced Lightning protection system by using high pulse Ion generator of E.S.E. lightning conductor made of high quality stainless steel, as specified and directed by the deptt. [ as per NFC17-102], Make: PROTART or SCHIRTEC with lightning strike counter & lightning conductor Tester chemical earthing electrode copper coated 50mm Dia. & 2.0m length with ERIC grounding material, 75mm single core copper wire with all accessories for installation etc.
410Type-VI 3 (Three) Storied RCC building at Myntdu Leshka
411Earthwork in excavation by Mechanical means up to a depth of 2 in below the existing ground level tor foundation, trenches Of foundations, footings Of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification Of soils.All kinds of soil (ordinary soiv hard soil/dense soil)
412Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete:Stone soling100mm
413Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete: Stone soling150 mm
414Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1 :6 (1 cement: 6 coarse sand)
415Half brick masonry with common burnt clay (non modular) lst class bricks in superstructure above plinth level up to first floor level: Cement mortar 1 :4 (1 cement: 4 coarse sand)
416Extra over item No 7.8 and 7.10 above tor each subsequentfloor or part thereof above the first floor level.
417Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): 1 :3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
418Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge: Columns, Pillars, Piers, Abutments, Posts and struts (using steel).
419Centering and shuttering including strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick.
420Centering and shuttering lncluding strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:Slabs, roofs, landings, balconies and access platform, shelves (using steel)
421Centering and shuttering lncluding strutting, propping etc. and removal of form for all heights complete and as directed by Engineer in charge:Stairs/ spiral staircase, (excluding landings) (using timber)
422Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars
423Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement: M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)
42412 mm cement plaster of mix: 1 : 4 (1 cement : 4 fine sand)
425Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3xl00 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12xl2 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead 1 1 .24 paint etc. complete as per drawing: Openable
426Providing wood work in frames Of doors, windows, clerestory windows and other frames, wrought trained and fixed in position with hold fast lugs or with dash fasteners of required diameter & length With lst class Local wood: Champa/ Diengrai.
427Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately): With lst class Local woodChampa/ Diengrai 35 mm thick shutters.
428Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core Of block board construction with frame of 1 St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including lsl marked Stainless Steel butt hinges with necessary screws.
429Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: 125x85x5.5 mm (heavy type)
430Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250xl0 mm
431Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
432Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.O mm thick glass panes
433Providing and fixing 1st quality ceramic glazed floor tiles conforming to ls:15622 (thickness to be specified by the manufacturer) of approved make in all colours and shades of any size as approved by Engineer-in-Charge in skirting, risers Of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
434Providing polished VITRlFIED wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirting over cement mortar bed 10 mm thick in prop.1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed: Deluxe range.
435Precast terrazzo tiles 22 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers Of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1 :3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of: Light shade pigment using white cement
436Extra for marble stone flcoring, skirting, in treads of steps and sqm 514.00 risers using single length up to 2.00 metre.
437Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 Sqm
438Providing and fixing wooden rounded hand rails in straight lengths with size of 100x60 mm complete as directed: With lst class Local wood (Champa/ Diengrai and the like).
439Providing and fixing 25x25 mm first class timber balustrade 25x25 mm square, wrought fixed with ends housed (square or splayed) to hand rails and trends or strips complcte. With lst class Local wood (Champa/ Diengrai and the like).
440Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
441Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.
442Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: New work (two or more coats).
443Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work.
444Internal Wiring:Wiringin looping system with copper PVC cable 250/440 volt grade of size 1.5sqmm of approved quality using PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to the highest point:Wall Light point: Short point wiring upto 3 mts.
445Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to a light Plug point when fixed elsewhere with continous earth wire complete:Short point wiring upto 3 mts.
446Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x4sqmm of approved quality using PVC casing capping including 15 amperes switch/socket Indian best quality complete to Power Plug point with continous earth wire complete : Short point wiring upto 3 mts.
447Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to Ceiling fan/ Exhaust fan point: Short point wiring upto 3 mts.
448Drawing of main and sub main line with DGSD approved VIR or PVC 250/440 Volts grade copper conductor in PVC casing complete with all accessories: With 2x4mm2 Copper conductor
449Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories: With 4x4mm2 Copper conductor.
450Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories: With 4x16mm2 Copper conductor.
451Supplying fitting andfixing of industrial type 15 Amp complete with all necessary accessories as required:15 Amp type socket.
452Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required. (75mmx75mm x 60mm deep).
453Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required.(100mmx100mm x 60mm deep)
454Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required.(150mmx75mm x 60mm deep)
455Suppying and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy haning shackle & 30mm length of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs 25.00/mtrs.AC ceiling Fan \"600\"mm sweep.
456Supplying fittings and fixing complete heavy duty double break fuse switches- HBC fuse type in sheet enclosure 50 Hz.415V. 3 pole with Neutral (T.P.N): 63Amp capacity.
457Supplying fitting and fixing of distribution board,ETPN DB\"s for MCB, Isolator, RCCB and RCBO. IP 30-#1K 08:8 ways 8+24 modules
458Supplying and fixing of load Kontaket Miniature Circuit Breakers DX3 MCB\"s for AC application till 63A:Double pole 415 V : 6-32 Amp
459Supplying fitting and fixingof DX3 Isolators for AC applications upto 125A: Double pole 240 V - 63Amp.
460Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 15 litres capacity
461Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 3 litres capacity.
462Supplying, fitting and fixing earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeetc. with charcoal/ coke and salt etc complete as required.
463Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories:Bulb - 23W.
464Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Bulb - 3W
465Supplyingfitting fixing of LED batten surface or wall mounted with all necessary accessories: with polycarbonate housing & integrated electronic driver: 20W (1150x 25x40mm).
466Suppling fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories:2x2 (595x595x65)mm luminaire :24W.
467Supply, installation, testing & commisioning of advanced Lightning protection system by using high pulse Ion generator of E.S.E. lightning conductor made of high quality stainless steel, as specified and directed by the deptt. [ as per NFC17-102], Make: PROTART or SCHIRTEC with lightning strike counter & lightning conductor Tester chemical earthing electrode copper coated 50mm Dia. & 2.0m length with ERIC grounding material, 75mm single core copper wire with all accessories for installation etc.
4682 (two) Storied Dormitory of 20(twenty) beds at Myntdu Leshka Stage-I
469Earthwork in excavation by Mechanical means up to a depth of 2 in below the existing ground level tor foundation, trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils: All kinds of soil (ordinary soil/ hard soil/dense soil).
470Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Stone soling150mm.
471Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement: 6 coarse sand).
472Half brick masonry with common burnt clay (non modular) lst class bricks in superstructure above plinth level up to first floor level in Cement mortar 1:3 (1 cement: 3 coarse sand).
473Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately): 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).
474Cement concrcte floor topping 1:1:2 (1 cement: 1 coarse sand: 2 stone aggregate) finished with a floating coat of neat cement, including cement slurry, complete. 20 mm thick
475Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge: Foundations, footings, bases of columns, etc. for mass concrete (using steel).
476Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge: Columns, Pillars, Piers, Abutments, Posts and struts (using steel)
477Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge: Slabs, roofs, landings, balconies and access platform, shelves (using steel).
478Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge: Stairs/ spiral staircase, (excluding landings) (using timber)
479Centering and shuttering including strutting, propping etc. and removal of form for all heights complcte and as directed by Engineer in charge: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
480Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required): Thermo-Mechanically Treated bars.
481Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first floor level, excluding the cost of centerlng, shuttering, finishing and reinforcement: M20 or 1 :1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)
48220 mm cement plaster of mix: 1 :4 (1 cement: 4 fine sand)
483Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3xl00 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12xl2 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing and direction of the Engineer-in-charge. Openable.
484Providing wood work in frames Of doors, windows, clerestory windows and other frames, wrought trained and fixed in position with hold fast lugs or with dash fasteners of required diameter & length. With lst class Local wood Champa/ Diengrai
485Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) With lst class Local wood Champa/ Diengrai 35 mm thick shutters
486Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core Of block board construction with frame of 1 St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including lsl marked Stainless Steel butt hinges with necessary screws
487Providing and fixing aluminium tower bolts, 1st marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:300mm X 10mm
488Providing and fixing lst marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm
489Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 5.5 mm thick glass panes
490Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 Sqm
491Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
492Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood.
493Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: New work (two or more coats).
494Polishing on wood work with ready mixed wax polish of approved brand and manufacture New work.
495Providing and fixing 1st quality ceramic glazed tloor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours and shades of any size as approved by Engineer-in-Charge in skirting, risers Of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.
496Providing polished VITRlFIED wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirting over cement mortar bed 10 mm thick in prop.1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. Deluxe range
497Precast terrazzo tiles 22 mm thick with graded marble chips of sizes up to 12 mm, in skirting and risers Of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement: 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of Medium shades pigment using 50°/o white cement and 50°/o ordinary cement.
49840 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 12 mm thick with marble chips Of sizes from 7 mm to 10 mm nominal size, laid in cement marble powder mix 3:1 (3 cement: 1 marble powder) by weighi in proportion of 2:3 (2 cement marble powder mix: 3 marble chips) by volume, including cement slurry eta. complete: Medium shade pigment with 50°/a white cement and 50°/o ordinary cement
499Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to ls:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with lsl marked white solid plastic seat and lid
500Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern. including painting of fittings and brackcts, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
501Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting Of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510xl040 mm bowl depth 250 mm.
502Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thickhard board backing Circular shape 450 mm dia.
503Providing and fixing toilet paper holder C.P brass.
504Providing and fixing soil, waste and vent pipe 100mm diameter Sand cast iron S&S pipe.
505Providing and fixing c.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter.
506Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall: 15 mm diameter nominal bore
507Making connection of G.I. distribution branch with a.I. main of following sizes by providing and tixing tee, including cutting and threading the pipe ctc. complcte: 25 to 40 mm nominal bore
508Providing and fixing brass stop cock of approved quality: 15 mm nominal bore.
509Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved qualfty for new work: 15 mm diameter pipe
510Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, Vc fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered).
511Internal Wiring:Wiringin looping system with copper PVC cable 250/440 volt grade of size 1.5sqmm of approved quality using PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to the highest point: Short point wiring upto 3 mts.
512Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to a light Plug point when fixed elsewhere with continous earth wire complete:Short point wiring upto 3 mts.
513Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x4sqmm of approved quality using PVC casing capping including 15 amperes switch/socket Indian best quality complete to Power Plug point with continous earth wire complete : Short point wiring upto 3 mts.
514Wiringin looping system with copper PVC cable 250/440 volt grade of size 2x2.5sqmm of approved quality using PVC casing capping including 5/15 amperes switch/socket Indian best quality complete to Ceiling fan/ Exhaust fan point: Short point wiring upto 3 mts.
515Drawing of main and sub main line with DGSD approved VIR or PVC 250/440 Volts grade copper conductor in PVC casing complete with all accessories:With 2x4mm2 Copper conductor
516Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories:With 4x4mm2 Copper conductor.
517Drawing of 3 phasemain line 4 wire withDGSD approved VIR or PVC 660 Volts grade copper conductorcasing cappingwith all accessories.(b) With 4x16mm2 Copper conductor
518Supplying fitting andfixing of industrial type 15 Amp complete with all necessary accessories as required:15 Amp type socket.
519Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required:(75mmx75mm x 60mm deep)
520Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required:(100mmx100mm x 60mm deep)
521Suppyingfitting and fixing Metal box of following sizes on surface or in recess with suitable size of Phendie laminated sheet cover in the front including painting etc as required:(150mmx75mm x 60mm deep)
522Suppying and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy haning shackle & 30mm length of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs 25.00/mtrs:AC ceiling Fan \"600\"mm sweep
523Supplying fittings and fixing complete heavy duty double break fuse switches- HBC fuse type in sheet enclosure 50 Hz.415V. 3 pole with Neutral (T.P.N): 63Amp capacity.
524Supplying fitting and fixing of distribution board,ETPN DB\"s for MCB, Isolator, RCCB and RCBOA. IP 30-#1K 08: 8 ways 8+24 modules.
525Supplying and fixing of load Kontaket Miniature Circuit Breakers DX3 MCB\"s for AC application till 63A: Double pole 415 V: 6-32 Amp.
526Supplying fitting and fixingof DX3 Isolators for AC applications upto 125A: Double pole 240 V: 63Amp
527Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 15 litres capacity.
528Supplying fitting and fixing of water Heater (Geyser) of 1.5KW/3KW with pressure release valve including all necessary accessories as required: 3 litres capacity.
529Supplying, fitting and fixing earthing with copper earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipeetc. with charcoal/ coke and salt etc complete as required.
530Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Bulb - 23W
531Supplyingfitting fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories: Bulb - 3W
532Supplyingfitting fixing of LED batten surface or wall mounted with all necessary accessories: with polycarbonate housing & integrated electronic driver: 20W (1150x 25x40mm).
533Suppling fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories:2x2 (595x595x65)mm luminaire: 24W
534Supply, installation, testing & commisioning of advanced Lightning protection system by using high pulse Ion generator of E.S.E. lightning conductor made of high quality stainless steel, as specified and directed by the deptt. [ as per NFC17-102], Make: PROTART or SCHIRTEC with lightning strike counter & lightning conductor Tester chemical earthing electrode copper coated 50mm Dia. & 2.0m length with ERIC grounding material, 75mm single core copper wire with all accessories for installation etc.

AI Tender Summary

OUR REF NO 45922754
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 09-01-2025
Authority
Authority Name Meghalaya Power Generation Corporation Limited
Work Description Structural Rehabilitation Work And Improvement Of Resevoir,Dam,Outlet And Basic Facilities Of Myntdu Leshka Stage-I Dam In West Jaintia Hills District Of Meghalaya Under Drip-Ii(Package Viii).
Basic Detail
Tender No IN-MEGHALAYA SPMU-412955-CW-RFB
Bidding Type Tender
Location
City East Khasi Hills
State Meghalaya
Key Dates
Publish Date 09 Dec 2024
Submission Date 09 Jan 2025
Open Date 09 Jan 2025
Finance
Tender Value Ref. Documents
Tender Fee 5000
EMD 8.47 Lakhs
Exemption Not Available
Document List
1dc54623-ef58-4c67-87d1-7f5dd1c175d6.html
BidDocumentsPackageVIII.rar
BOQ_1749.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 09, 2024
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2024
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Dec 09, 2024
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jan 09, 2025
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jan 09, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 09, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

1dc54623-ef58-4c67-87d1-7f5dd1c175d6.html

rar

BidDocumentsPackageVIII.rar

xls

BOQ_1749.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender