Tender For Repair & Maintenance Works Around Natural Pond, Lawn Tennis Court, Skating Rink Atkaiga Township.
Tender Value
56.99 Lakhs
Estimated cost
Bid Submission
14 Nov 2024
0 days left
EMD
1.13 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kaiga → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair & maintenance works around Natural Pond, Lawn Tennis Court, Skating rink atKaiga Township.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork Excavation in all Sorts of Soil for foundation trenches, walls, drains, plinths, footings, pedestals, columns and for all other miscellaneous foundation works etc., including Cutting / removing & clearance of jungle, bushes, grass & creepers etc. Shoring, strutting, bailing out water [if necessary], dressing, leveling & hand ramming he bottom of foundation base using wooden hand rammer with proper watering, refilling the sides of the foundation with excavated available good quality of Soil, leveling & hand ramming the sides of foundation base using wooden hand rammer with proper watering, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the waste soil or surplus soil, generated waste up to a lead of 2 to 3 kms. from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. |
| 2 | Dewatering of pond by pumping out water collected by natural drainage inside pond including providing sump wherever necessary, cost of all materials ,machinery , labour ,drainage and all other ancillary operations etc .complete |
| 3 | Providing and laying PCC, 1:2:4 using 20 mm & downsize, clean, crushed, well graded, cubical shape, sharp edged aggregates of hard, durable & approved quality stones / rubbles for plinth, floor & drain bedding & all other various miscellaneous PCC works including preparation of base by closed hacking / chipping the concrete / plastered surfaces; racking out the adjoining masonry joints and cleaning, machine mixing, transporting, laying, spreading, consolidation, leveling, finishing, curing, providing; fixingremoving staging / platform, providing; fixing & removing formwork, collecting and disposing the generated waste upto a lead of 3000 meters from the place of work & cleaning the work area etc., complete all as per standard technical specification and as directed by the engineer-in-charge at all locations and at all lifts/heights.Note: OPC 43 Grade cement of reputed brand shall be used for executing this item. |
| 4 | Providing & Constructing Masonry with approved C. C. Solid Blocks of size 400 X 200 X 200 mm / 300 X 200 X 200 mm, having crushing strength not less than 45 Kgs/cm2 and confirming to the BIS 2185 part-I of the latest edition, in CM 1:5 for foundations, trenches, walls, drains, plinths and all other miscellaneous masonry works etc. including simultaneous flush pointing, curing, preparation of base by close hacking / chipping the concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste, up to a lead of 3000 to 4000 mtrs. from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts / heights. |
| 5 | Providing and laying Cement Plaster, 15 mm thick for internal surfaces of walls and columns in CM 1:5, rubbed perfectly so as to obtain smooth and even finish including preparation of base by closed hacking / chipping the concrete / plastered surfaces; racking out the adjoining masonry joints and cleaning, curing, providing; fixingremoving staging / platform, collecting and disposing the generated waste upto a lead of 3000 meters from the place of work & cleaning the work area etc., complete all as per standard technical specification and as directed by the engineer-in-charge at all locations and at all lifts/heights. |
| 6 | Providing & laying RCC of grade 1:1.5:3 using 20mm & downsize clean, crushed, well graded aggregates of hard ,durable &approved quality of RCC work including mixing,transporting,laying,spreading,consolidation,leveling,finishing,curing,preparation ,fixing and removing staging/platform, collecting & disposing the generated waste upto a lead of 3000 mtrs from the place of work and clean the work area .complete all as per standard technical specifications, drawing (if any)and as directed by engineer-in-charge at all location and at all lifts/height.note-OPC-43 grade cement of reputed brand/make & as approved by EIC shall be used complete all as per standard technical specifications, drawing (if any)and as directed by engineer-in-charge at all location and at all lifts/height. |
| 7 | Providing and laying approved make High Yield Strength Deformed Reinforcement bars of all diameters confirming to the grade Fe - 500 of IS:1786 including cutting, bending, transporting, placing in position & binding with 16 gauge soft annealed binding wire of approved quality & of approved make for RCC worksproviding & placing spacer bars, cover blocksproviding; fixing& removing necessary staging / platform,complete all as per specification, as per manufacturer\"s specification and as directed by the Engineer-in-charge at all locations and at all lifts . Note: Therate shall be inclusive of Binding wire and cover blocks and will not be measured separately for payment. |
| 8 | Providing ,placing & removing formwork for all concrete work including providing, fixing,& removing staging ,platform collecting &disposing the generated waste up to a lead of 2-3kmsNote- measurement shall be made for formwork in contact with concrete surface. |
| 9 | Providing and filling the Selected & good quality Earth brought from the borrow pits and filling in Low laying areas, plinth, road berms & drain sides etc., to the required gradient, camber & watering properly and compacting the each layer by using portable hand compactor, collecting & disposing the generated waste up to a lead of 3000 mtrs. from the place of work & cleaning the work area,etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. |
| 10 | Providing,fixing / placing in position Rotary Press; Heavy Duty; Anti skid; 5Star; Paver Blocks of 55 mm thick [of standard size & in colour combination of terracotta & blackand as selected by engineer-in-charge] of standard make & of 1st quality. Paver blocks compressive strength shall not be less than 300 Kg/ Sqcm and manufactured as per IS 15658-2006, Paver shall be laid over well Saturated 50 mm. thick River Sand / M sand bedding including preparation of base by proper dressing / leveling and ramming [using Plate Vibrator to have uniform surface and to get the required line & level / gradient, camber] the basewith proper watering, the gaps shall be filled with fine sand, ramming top surface of pavers using Plate Vibrator to have uniform surface and to get the required line & level / gradient & camber, collecting & disposing the generated waste, construction waste up to a lead of 2 to 3 kms. from the place of work & cleaning the work area,etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift. |
| 11 | Fabricating gates, hand rails, frames of panels doors, windows & shutters, shutters, purlins, rafters horizontal / vertical / cross members, columns, beams, trusses and all other miscellaneous new & modification to existing structure/s including Providing standard MS Steel Sections which are required for executing this work and fixing erecting the same in position to true line level & plumb, preparation of base, providing & fixing hilti bolts [of approved quality] of suitable dia. & length, preparation of base, providing & painting One Coat of approved Zinc Phosphate Primer of Asian paints Berger make and Two Coats of first quality synthetic enamel paint of Asian paints / Berger make, of approved shade / colour etc., providing; fixing & removing staging / platform / ladder, collecting & disposing the general waste up to a lead of 3000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations & lifts / heights. |
| 12 | Providing and fixing in position20 - 22 mm. thick, Kota StoneSlabs / Tilesof approved quality; of approve shaded / colour & one side Mirror Polished. Laying / fixing in approved pattern for FLOORING to the true line; level & slope . includingTiles using cement mortar in 1:4; 20 mm. thick bedding,colouring pigment to match the existing surface, preparation of base & curing properly, Polishing the joints using polishing machine / polishing stone,cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of50 meters outside work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all height / lifts.Note: Basic rate of 20 - 25 mm. thick, Kota StoneSlabs / Tiles shall not be less than 395.00 per Sqm. |
| 13 | Dismantling of old existing flooring and Providing &fixing in position Granite flooringSlabs / Tilesof approved quality; of approve shaded / colour & one side Mirror Polished. Laying / fixing in approved pattern for FLOORING to the true line; level & slope . includingTiles using cement mortar in 1:4; 20 mm. thick bedding,coloring pigment to match the existing surface, preparation of base & curing properly, Polishing the joints using polishing machine / polishing stone,cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of50 meters outside work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all height / lifts. |
| 14 | Supplying installing and commissioning of floating fountain of SS floatter 4ft (submersible pump : open well 7.5 HP kirloskar make) ,height of water flow of fountain8ft-10ft controlled with valves,3\"nozzels,36w RGB led light with remote controlled, control penal for pump & light, with all installation and electrification charges.complete all as per the standard technical specifications, as per manufacturer\"s technical specification and as directed by the engineer-in-charge at all locations & at all heights & lifts. |
AI Tender Summary
Tender Timeline
Oct 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 16, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender