Construction Of Toilet At Kharka Gaon Community Hall,Okaity(M/F) Pgsd-I,Mirik
Tender Value
3 Lakhs
Estimated cost
Bid Submission
31 Oct 2024
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mirik → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Toilet At Kharka Gaon Community Hall,Okaity(M/F) Pgsd-I,Mirik
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). (a) With earth obtained by fresh excavation upto 1800 mm. depth (including the cost of excavation from land arranged by the Deptt. within a lead of 100 m.) |
| 3 | Labour for laying 150 mm to 200 mm boulder soling including roug dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up alljoints with sandy clay or earth. |
| 4 | Cost of Boulder 150 mm size delivered and stacked at site |
| 5 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety (i) (1:3:6) propotion |
| 6 | Ordinary Cement concrete (mix 1:1.5:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) M-20 grade with N.B VarietyIn ground floor and foundation . |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. i) Tor/mild steel (oth er manufacture not specified) |
| 8 | Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriageofallmaterials to site (a) In Road and Jhora Work |
| 9 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, cross-drain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction.(c) Steel Shuttering or 9 to 12 mm thick approved quality board shuttering in any concrete work. |
| 10 | M.S. structural works with hollow section (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one nother with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc weldingconforming to IS: 816-1969 & IS: 9595 using trodes of approved akeand brand conforming to IS:814- 2004, aulage,hoisting and erection all complete. The rate includes the cost of all\ M.S.ollowsection,all consumables such as electrodes, gas and hire charges ofalltools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. a) Span up to 12 Mtr |
| 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) (b) , ground Floor. |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](4:1) cement moter(b)15mm thick .i) ground Floor. |
| 13 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. |
| 14 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (i) Other Local Wood |
| 15 | Z-batten shutters of door and window asper design avings tongued and groove-halflap jointed as per direction ofthe Engineer-in- harge including fittingnd fixing shutterin position,but excluding the cost of hinges and other fittingsin ground floor.(iv) Other Local Wood |
| 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40mm x6mm above 250 mm.(b) 40 mmx 6 mm above 250 mm |
| 17 | Iron butt hinges of approved quality fitted with fixed with steel screws with ISI mark. 100 mmx 75mm x 3.50 mm |
| 18 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia bolt. |
| 19 | Anodized aluminum barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:150mm long x 10mm dia. Bolt |
| 20 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:150 mm grip x 12 mm dia rod |
| 21 | Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall) 4mm |
| 22 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof :- a) With 0.50mm thick sheet |
| 23 | Supplying, fitting and fixing steelwindows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening ifrequired, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.Fixed type steel window as per IS sizes horizontal glazing bars. |
| 24 | Applying decorative cement based paint ofapproved quality after preparing the surfaceincluding scraping the same thoroughly(plastered or concrete surface) as per manufacturer\"s specification. |
| 25 | (b) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 27 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface |
| 28 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel surface |
| 29 | Sanitary and Plumbing :Supplying, fitting and fixing PVCpipes of approved make of Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS: 1239 (Part - I).with all necessary accessories, specials viz. socket,bend, ee, union,cross, elbo, nipple,ongscrew, reducing socket, educing tee, short piece etc. fitted holder bats clamps, including cutting pipes, making threads,fitting,fixing etc. complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coatsof painting with approved paint in any position above ground. (Payment will bemad centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately).40 mm(a) For UNDER GROUNDWORK |
| 30 | Supplying, fitting and fixing PVCpipes of approved make of Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS: 1239 (Part - I).with all necessary accessories, specials viz. socket,bend, ee, union,cross, elbo, nipple,ongscrew, reducing socket, educing tee, short piece etc. fitted holder bats clamps, including cutting pipes, making threads,fitting,fixing etc. complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coatsof painting with approved paint in any position above ground. (Payment will bemad centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately).40 mm(b) For CONCEALEDWORK |
| 31 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality ofapprovedbrand bearing I.S.I. Markingwith fittings (tested to 21 kg per sq. cm.)15 mm dia |
| 32 | Supply of High Density Poly-ethylene Pipe formingto IS - 4984 - 1985 (Dia) [PE - 63] |
| 33 | Labour for fitting and fixingigh density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paintsetc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holesin walls or R.C. floor where necessary and mendinggood all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder batclamps(any floor)r for underground work including cutting trenches upto 1.5 metre andefillinghe same complete as perirection of the Engineer-in-charge.(iii)25 mm dia |
| 34 | Supplying, fitting and fixing bib cock or stop cock.e)PTMT (Polytetra Bib Cock / Stop Cock( Prayag or equivalent) |
| 35 | Supplying P.V.C. Water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity |
| 36 | Supplying, fitting & fixing UPVC pipesA- Type and fittings conforming toS:13592-1992 with all necessary clamps nails, including makingholes in walls,, floor etc. cutting trenches in anysoil through masonry concrete structures etc ifnecessary and mending good damages includingjoining with jointing materails (SpunB (ii) 110 mm. Dia. |
| 37 | Plain Tee 110 mm |
| 38 | Pipe Clip 110 mm |
| 39 | Bend 45 Degree 110 mm |
| 40 | Door Bend (T.S) 110 MM |
| 41 | Vent Cowl 110 MM |
| 42 | Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paintsnetc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the sameomplete as per direction of the Engineer-in-carge. (Payment will be madeon centre line measurement of the total pipeline including specials. )A)Above Ground 110 mm |
| 43 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing).(ii) 530 mm X 410 mm |
| 44 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately) |
| 45 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm |
| 46 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.Cmanhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1)to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavat on earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removingspoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificialstone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevantI.S.Code. 10 Users |
| 47 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size)Mincluding R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and uttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside di |
| 48 | ADD 18% GST |
| 49 | ADD 1% CESS |
AI Tender Summary
Tender Timeline
Oct 24, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender