|
| 1 | M & L for maintenance / repairs or periodical checkby skilled crane repairer to all component of EOT crane upto 5 Ton capacityincluding limit switches vertical and horizontal motion and longitudial motion and load testing, greasing/ lubricationto all movable parts, rail track line of crane, adjustment/ rectification of flexible cable with cable carrier/ replacement of PVC cable carriers, rectification/ tightening of all electrical connections at main EOT panels and connected electrical drive motors, checking and rectification of brake system with checking of tie rod, checking of gear oil/ replacements of gasket/oil seal and required nut and bolts checking/rectificationof portable/ pendent control panel and checking/rectification of cranes light pointsfor smooth functioning and cleaning and dusting of all componentscomplete all as specified and directed. Note-(i)Parts replacedshall be measuredand paid under items of BOQ as supply only.(ii) Srl item No 1 here in abovelabour charges only has been considered. |
| 2 | All as per description of Srl item No 01 here in before, but EOT crane 10 ton capacity. |
| 3 | Supply only Lever Type Limit Switch 2 Way Type LS /2SH2 in IP54 enclosure with two Contacts for 2 ton to 5 Ton crane complete all as specified anddirected. |
| 4 | All as per description Srl item No 03 here in before, but forEOT crane 10 ton capacity. |
| 5 | Supply only Rotary Type Limit Switch Gear Ratio 48:1 with 2 N.O.+2 N.C. Contact in IP54 Enclosure suitable upto 5 ton crane complete all as specified and directed. |
| 6 | All as per description Srl item No 05 here in before, but for EOT crane 10 ton capacity. |
| 7 | Supply only electromagnetic break 200 mm 415 V AC supply for hoist motion complete suitable for 2 ton crane all as specified and directed.. |
| 8 | All as per description Srl item No 07 here in before, but for EOT crane 10 ton capacity. |
| 9 | Supply only Electro hydraulic thruster operated brake suitable for hoisting motion/cross travel motion for crane 2 to 5 Ton crane, 415V, AC supply complete all as specified and directed. |
| 10 | All as per description of Srl item No 09 here in before, but for EOT crane 10 ton capacity. |
| 11 | Supply only Electro hydraulic thruster operated brake suitable for long travel motion for crane 2 to 5 Ton crane, 415V, AC supply, complete all as specified and directed. |
| 12 | All as per description of Srl item No 11 here in before, but for EOT crane 10 ton capacity. |
| 13 | Supply only Electro Hydraulic Thruster Break shoe 250 mm and 18 Kg for Hoist Motion/cross travel motion complete all as specified and directed |
| 14 | Supply only Electro Hydraulic Thruster Break shoe 250 mm &18 Kgfor long travel motion complete all as specified and directed. |
| 15 | Supply only Helical Gear Box for Hoist Motion Horizontal Type for 2 Ton crane and opening and removing Hoist Gear Box Top Cover by unscrewing Nut Bolts, side shaft plates etc & replacement of damage oil Seal, gaskets of suitable size and replacement of gear oil after washing flushing & cleaning gear Box Chamber completely by kerosene oil, and refixing the same complete all as specified and directedNote : Gear oil shall be measured & paid separately. |
| 16 | All as perdescription of Srl item No 15 here in before, but for EOT crane 10 ton capacity. |
| 17 | Supply only Helical Gear Box of L.T. & C.T. Motion Vertical Type for 2 ton to 5 ton crane and opening and removing of LT & CT Box Top Cover by unscrewing Nut Bolts , side shaft plates etc. Replacement of Damage Oil Seal , Gaskets of Suitable size and replacement of Gear Oil after washing flushing & cleaning Gear Box chamber completely by kerosene Oil and refixing the same complete all as specified and directed.Note :Gear oil shall be measured & paid separately. |
| 18 | All as perdescription of Srl item No 17 here in before, but for EOT crane 10 ton capacity. |
| 19 | Supply and filling of Gear Oil of SW 20 complete all as specified and directed. |
| 20 | S&F in repairs of stainer wire 6 mm with end bracket 2 Nos for E.O.T Crane End Carriage side welded including cutting welding complete all as specified anddirected. |
| 21 | M & L for power contactor 3 pole /2pole upto 30 Amp as per existing nomenclature/ make model and sizecomplete all as specified and directed. |
| 22 | M&Lfor overload relay upto 10 Amp as per existing make model and size complete all as specified and directed. |
| 23 | Dismantling & strip opening micro drive box complete with rectifier transformer arrangement, megnetic disc both side coupling for remotting /moving both side ends of driving shaft (gear box coupling side and braking arrangement coupling side) making multi key arrangement on both the shaft and coupling (Teeth system) to avoid any kind of play in coupling and shaft including replacement of 04 Nos carbon bushes, replacement of 2 Nos gun metal bushes including making oiling arrangement in bushes and side covers of bushes/housing of micro drive reassembling/testing complete (crane capacity 2 to 5 Ton) all as specified and directed.. |
| 24 | All as perdescription of Srl item No 23 here in before but for EOT crane 10 ton capacity. |
| 25 | Supply only of Push Button Station 8 way including soldering, replacment of unserviciable parts all as specified and directed. |
| 26 | Dismantling carefully, repair & refixing, motor electric squirrel cage induction type and carrying out rewinding with super enamelled copper windings wire of suitable size so as to provide rated output at rated speed complete including all other winding materials such as leathroid paper, bamboo strips, PVC insulation tape, cotton tape, PVC sleeves,insulation varnish etc complete including assembling testing and comprising of motors of 3 phase 400-440 Volts, 50 cycles/second, 1440 RPM of 0.5 HPto 3 HP capacities complete all as specified and directed. |
| 27 | Supply only for break /compresure oilof dot 3 for EOT crane up to 10 Ton capacity complete all as specified and directed. |
| 28 | Supply only for grease for EOT crane up to 10 Ton capacity complete all as specified and directed. |
| 29 | S&F in repairs, flexible coupling suitable perfect allignment between motor and driven machine with greasing and replacement of suitable nuts and bolt complete all as specified and directed. |
| 30 | S&F in repairs, tie rod of break system including nut, bolt complete all specified and directed. |
| 31 | S&F in repairs, wheel for LT and CTupto 5 ton crane and removing bearing Cover by unscrewing Nut Bolts , side shaft plates etc & replacement of gaskets of suitable size and greasing of bearing after washing flushing & cleaning bearing and casing Chamber completely by kerosene oil, complete all as specified and directed. |
| 32 | All as per description of Srl item No 31 here in before but for EOT crane 10 ton capacity. |
| 33 | Supply, fixing, testing, installation and commissioning in replacement of APFC Panel 250 KVARoutdoor type panel, weldless cubical Kioskin modular bolled construction type dust and vermin proof floor mounted type (IP-65 degree of protection ) made out of 3.15 mm thick CRCA sheet of recommended size. All sheet metal parts separately chemically treated with 7 tank treatment process. The panel having both side opening door with locking arrangement, Capacitor required front/ openable compact modular bolled design removable capacitror reactor assembly for easy maintenance capcitor bank with at least 150000 hours & losses restricted to 0.2W/ KVAR comprising,all doors fixed with aluminium hinges with suitable size nut bolts and shall have flexible fixing of each capacitors, contactors, MCB TP, MCCB and controlgear compartment with cable alley tray of size not less than 30 cm. duly painted with two coats of synthetic enamel paint powder coated, bus bar 600 amps rating made of aluminium strip duly drilled holes for connections, capacity control wiring and mounted on epoxy based post insulatorsfor 3 phase 4 wire 415 volts 50 HZ AC supply, hibling, cable entry boxes, cable gland and APFC panel shall be mounted on iron angle frame made out of 50 X 50X 6 mm frame with 4 no legs size not less than 45 cms fixed with nut bolts of suitable size (bottom portion of the panel), grouted by using foundation 1:2:4 type C1 with 20 mm graded stone aggregates totally tested as per IEC 61439-I & II , suitable for and including taking down existing APFC panelcomplete and including the following :- (Item No. 33 countinued to item Srl No. 33.01 here in below) |
| 34 | (Item No. 33 countinued from Item Srl No. 33.00 here in above)(a) Incoming MCCB FP with adjustable thermal release settings 415 V, 400 Amps, 36 KA -1 No(b) Outgoing MCB TP 415 V 80 Amp 10 KA, C Curve - 1 No(c) Outgoing MCB TP 415 V 63 Amp 10 KA, C Curve - 1 No(d) Outgoing MCB TP 415 V 50 Amp 10 KA, C Curve - 2 No(e) Outgoing MCB TP 415 V 32 Amp 10 KA, C Curve - 2 No(f) Outgoing MCB TP 415 V 25 Amp 10 KA, C Curve - 2 No(g) Outgoing MCB TP 415 V 16 Amp 10 KA, C Curve - 2 No(h) Outgoing MCB TP 415 V 10 Amp 10 KA, C Curve - 2 No(j) Capacitive heavy duty contactor 50 KVAR - 1 No(k) Capacitive heavy duty contactor40 KVAR - 1 No(l) Capacitive heavy duty contactor 30 KVAR - 2 No(m) Capacitive heavy duty contactor 20 KVAR - 2 No(n)Capacitive heavy duty contactor 15 KVAR - 2 No(o)Capacitive heavy duty contactor 10 KVAR - 2 No(p)Capacitive heavy duty contactor 5 KVAR - 2 No(Item No. 33 countinued to Item Srl No. 33.02 here in below) |
| 35 | (Item No. 33 countinued from Item Srl No. 33.01 here in above)(q) Shunt capacitor (Heavy duty cylinderical) 50 KVAR -1 No(r) Shunt capacitor (Heavy duty cylinderical) 40/37 KVAR - 1 No(s) Shunt capacitor (Heavy duty cylinderical) 30 KVAR - 2 No(t) Shunt capacitor (Heavy duty cylinderical) 20 KVAR - 2 No(u) Shunt capacitor (Heavy duty cylinderical) 15/16 KVAR - 2 No(v) Shunt capacitor (Heavy duty cylinderical) 10/12 KVAR - 2 No(w) Shunt capacitor (Heavy duty cylinderical) 5 KVAR - 2 No(x) Copper bus bar suitable for 600 Amps - 4 pole(y) Microprocessor based APFC relay with 12 steps - 1 Nos(a) Indicator set RYB -01 Set of 3 pcs only.(aa) Multifunction digital panel meter suitable to display amps, volts, frequency etc - 01 No including CTs of appropriate ratio and selector switchs. (ab) All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed.Note:- Ser No (a) to (aa) shall be of Make specified in list of makes in Appx \"B\" of PS-II. |
| 36 | S&F in repairs, aluminium strip 25 x 3.15mm complete with saddles and insulators made out of porcelain and fixing screws for roof conductor/down conductor including nut bolts & washers threading and riveting for joints for suitable size as required at site complete all as specified and directed.Note:- Resin/porcelain cast insulators shall be fixed at an interval of not more than 75 cm. |
| 37 | S&F in repairs earth continuity conductor or main earthing lead fixed to wall on batten or resses or chases or burried in ground or down in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI strip 32x6mm, complete all as specified and directed. |
| 38 | S&F in repairs air termination single pointed aluminium rod 12mm dia and 300 mm long fixed on GI pipeof suitable size & fixing arrangement and making threading in one end of air termination rodcomplete all as specified and directed |
| 39 | M&L for plain Cement concrete 1:2:4 typeB-1, (Using 20 mm graded aggregate) as in foundation block of air termination rod etc. including form work for rough finished surfaces and finishing the exposed surface with 5 mm thick rendering in CM 1:3. complete all as specified and directed. |
| 40 | S&F in repair steel tubes medium grade galvanised with al fittings and fixed complete to walls, floors and roof of size 40mm dia complete all as specified. |
| 41 | S&F in repairs, Test Point terminal block made out of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws including sheet box complete with front hinged shutter with locking arrangement of size 30cmx25cmx8cm and duly painted with two coats of synthetic enamelled paint over a coat of red oxide primer including prepration of new steel surfaces, complete all as specified and directed. |
| 42 | M&L forearthing with steelearth plate electrode ofsize 60cmx60cmx6mm thick buried directly in ground to a depth not less than 2.25mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full lenght of earth plate,40mm dia GI tubing light grade protection pipe upto test point, 20mm dia GI medium grade watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30X30cm made of RCC 1:3:6 with suitable handle,angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetable soil to the remaining 10%,removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75x75x6mm fixed to wall all as specified in electrical plate No 3 of SSR Part-I and directed. Note:- (i) Quoted unit rateincludes the cost of 7.5 metre GI pipe for protection of earth lead. (ii)Quoted unit rate includes the cost of 7.5 metre GI earth lead. |
| 43 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I, complete all as specified and directed. Note:-(i) Quoted unit rateincludes the cost of 7.5 metre GI protection pipe.(ii)Quoted unit rate includes the cost of 7.5 metre GI earth lead. |
| 44 | M & L in replacement for earthing complete with copper earth plate electrode 60cmx60cmx3.15 mm thick buried directly inground (earth pit not less than 2.25 Mtr deep below normal ground level) with topedge of the plate not less than 1.5 Mtr belownormal ground level connecting with copper earthstrip 20x3 mm dia by means ofbolt nut check nuts and washersof galvanizediron and provision of GI tubing medium grade (ISI marked) of 40 mm bore for protection of earthstrip of 20x3 mm includingPCC with 1:2:4 type B1, using 20mm graded crushed stone aggregate CI frame and cover of angle iron 40x40x6mm andhandle 6mm dia MS bar made toshape GI light grade 20mm bore pipe for wateringperforatedatbottom 1.75 metre longplaced on top edge of earth plate, charcoal and common salt filling with fixing arrangment , funnel, wire meshand earth work inhard/dense soil, returning filling in and removal of surplus soil to adistance not exceeding 50 Metres , all asper electrical plate No3 of SSR 2009 Pt -I to earth test point all as specified orindicatedincludingtesting on completion.NOTE :- The quoted rate of earthing shall be deemed to included cost of 7.5 m long cooper strip 20x3 mm dia and protection pipe of 40 mm bore medium grade, any variation in length shall be adjusted through deviation order based on SSR rates adjusted with quoted rates. |
| 45 | S&F in replacement of Glow Sign Board, box type display in cuboid shape made out of acrylic sheet, both side framed with Square Hollow Mild Steel section dia not less than 40mm, thickness not less than 3.25 mm, side cut to sizes/ shape, back ground/ sides covered with MS sheet 18 SWG duly painted with tow coats of synthetic enamel paint over a coat of red oxide primer, LED Strip PVC type lights, waterproof, High Brightness, Low heat generation, 1.5 watt, 12 Volts fittings fixed inside of text for reflection incl driver/ contoller with fixing arrangement on acrylic sheet, letters size 20x20x05CM for \"COMPLAINT CELL E/M\", 15x15x05CM except brakets for \"CHAKKI (D-II ZONE)\" and 10x10x05CM except brakets for \"GE (S) MAMUN\" incl 02 x Extruded and duly enlghted MES logo fitted on both corner on acrylic sheet in front view of cuboid as directed by Engr-in-charge, fixed on PCC of size 0.45x0.45x0.3 Mtr by using MS angle size 50x50x6 mm including back supports for Sign Board in diagonally of required length, complete all as specified and directed.(Item No. 43 continued to Item Srl No.43.01 here in below) |
| 46 | (Item No. 43 continued from Item Srl No. 43.00 here in above)Note:- (i) Brakets used in sentences size will be decided according to letter size. (ii) Cost of Square Hollow mild steel sections shall be included in qouted rates. (iii) Cost of PCC 1:2:4 will be deemed to be included in item rates. (iv) Cost of fabrication/jointing of pipe for framing the boards shall be deemed to be included in item rates. (v) Colour of acrylic sheet and letter will be decided by Engr-in-charge. (vi) Cost of angle iron used for standing of Glow Sign Board inlcuding back supports shall be deemed to be included in item rates. (vii) Sample of MES Logo will be provdied by department and size will be decided by Engr-in-charge. (viii) Replacement of Independent point wiring for Glow Sign Board with PVC insulated fire retardant low smoke multistranded copper conductor cable of suitable size/ length including new PVC concealed non metallic conduit(ISI Marked) medium grade not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and sheet metal enclosure DB 2 Way alongwith SPN 16 Ampincluding cutting chases in wall and making good to disturbed surface as existing surface inclduing with necessary screws and nuts. (ix) Iron parts duly painted with two coats of synthetic enamel paint over a coat of red oxide primer. (x) Lead/ wire of required size/ length including PVC concealed non matallic conduit (ISI Marked) medium grade not less than 20 mm dia and 1.8 mm thick including all fittings for make ON/OFF of Glow Sign Board will be provided by contractor. (xi) Any item left out for completion of job is deemed to be included in overall rates quoted by contractor. |
| 47 | M&L for repairing & servicing and maint of APFC Panels after removing all connections from APFC panel having feeders(Total of incoming and outgoing), any capacity,indoor or outdoor type,for repairs/servicing, Cleaning properly all parts and removing dust, carbon deposits etc, removing unservicable thimbles, if any, of connections, setting of relay, connection of capacitor, refixing serviceable items to the panel and replacing unservicable parts with new and making all connections including testing for proper functioning of the panel as per standard engineering pactice and replacment of unservicableparts including complete breakable accessories such as door hinges, welding of broken doors, indicator light and wiringof accesories, unservicable multifunctional meter, unserviceable locking arrangement as per existing part, repairing of APFC Panel legs, welding work, neceassry PCC work, excavataion and earth work including disconnection and reconnection of cables including change of thimbles as required on site,forany size any capacity APFC Panel also fixing of LT Danger Notice plate both side of the Panel, APFC panel painted with two coats of synthetic enamelled paint over a coat of red oxide primerincluding prepration of new steel surfaces,complete all as directed. Note:- Capacitor, relay, TPN, MCCB, contactor, control wiring, multifunction meter shall be measured and paid separately as supply only. |
| 48 | Supply only APFC relay, 8 step, 5 Amp, 415 voltage inluding CT Input complete all as specified and directed. |
| 49 | Supply only APFC relay, 12 step, 5 Amp, 415 voltage inluding CT Input complete all as specified and directed. |
| 50 | Supply only MCB TP 80 Amp, 3 pole, operating voltage 415 V, 3 phase, 50 Hz and breaking capacity 10 KA complete all as specified and directed. |
| 51 | Supply only MCB TP 63/50 Amp, 3 pole, operating voltage 415 V, 3 phase, 50 Hz and breaking capacity 10 KA complete all as specified and directed. |
| 52 | Supply only MCB TP 32/ 25/16/10 Amp, 3 pole, operating voltage 415 V, 3 phase, 50 Hz and breaking capacity 10 KA complete all as specified and directed. |
| 53 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 50 KVAR complete all as specified and directed. |
| 54 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 40/37 KVAR complete all as specified and directed. |
| 55 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 30 KVAR complete all as specified and directed. |
| 56 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 20 KVAR complete all as specified and directed. |
| 57 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 15/16 KVAR complete all as specified and directed. |
| 58 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 10/12 KVAR complete all as specified and directed. |
| 59 | Supply only capacitor duty contactor, 3 Pole, Mini type, 415 Volt, 05 KVAR complete all as specified and directed. |
| 60 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 50 KVAR complete all as specified and directed. |
| 61 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 40 KVAR complete all as specified and directed. |
| 62 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 30 KVAR complete all as specified and directed. |
| 63 | Supply onlyheavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 20 KVAR complete all as specified and directed. |
| 64 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 15 KVAR complete all as specified and directed. |
| 65 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 10 KVAR complete all as specified and directed. |
| 66 | Supply only heavy duty capacitor cylindrical type 415/440 Volts, 50 Hz, 3 Phase, 05 KVAR complete all as specified and directed. |
| 67 | Supply only indicator set RYB -01 Set of 3 pcs including thimbles complete all as specified and directed. |
| 68 | Supply only APFC Panel control wiring with 1.5 Sqmm copper wire FRLSincluding thimbles complete all as specified and directed. |
| 69 | Supply only multifunction meter alongwith CT and selector switch complete all as specified and directed. |
| 70 | Supply only MCCB 4 Pole, 415 V, Adjustable Thermal Adjustable Magnetic (TM) type, 200 Amps rating, microprecesser based energy with rupturing capacity 36 KA, approved, complete all as specified and directed. |
| 71 | All as per description Srl item No. 67.00 here in before, but 250 Amps. |
| 72 | All as per description Srl item No. 67.00 here in before , but 315 Amps. |
| 73 | All as per description srl item No. 67.00 here in before, but 400 Amps. |
| 74 | S&F in repairs, servicing and maint of LT panels after removing all connections from LT panel having feeders(Total of incoming and outgoing), any capacity,indoor or outdoor type,for repairs/servicing, Cleaning properly all parts and removing dust, carbon deposits etc, removing unserviveable thimbles, if any, of connections, refixing serviceable items to the panel and replacing unserviceable parts with new and making all connections including testing for proper functioning of the panel as per standard engineering pactice and replacment of UNSV spare part including complete breakable accessories such as door hinges, welding of broken doors, unserviceable aluminium bus bar,indicator light and wiringof accesories, UNSV Ampmeter & UNSV Voltmeter, unserviceable locking arrangement as per existing part, repairing of LT Panel legs, welding work, neceassry PCC work, excavataion and earth work including disconnection and reconnection of cables,forany size any capacity LT Panel also fixing of LT Danger Notice plate both side of the Panel, LT panel painted with two coats of synthetic enamelled paint over a coat of red oxide primer, complete all as specified and directed.Note:- Only Amp Meter & Volt Meter, MCCB/MCBs shall be measured and paid separately. |
| 75 | S&F in repairs automatic street light timer switch for LED street light using infrared sensor based nature switch for automatic switching of street light, 440 volt, 3phase of cap 5-8 KW, outdoor type factory made IP-65 protection having nature switch operating should be based on natural light flux level and selector switch to change the mode of operation, supply indicator with SMC box and locking arrangement . The sensor along withpower Contactor of cap up to 63 Amp and incoming and outloging MCB TPN cap upto 63 Amp with auto manual operation and overvoltage and overcurrent protection and auto trip & auto reset making arrangement incl internal wiring of copper cable FRLS 10 sqmm single core multistranded and mounted arrangement with clump and nut bolt on wall/poles, dust proof and temper proof complete all accessories as required and provided by manufacturer, complete all as specified and directed. |
| 76 | S&F in repairs 1 mm thick Mild steel sheet, plain as inLT panels and similar work, cut to size, holes punched, fixed notsincluding round headed screws, clout nails or rivets and fixed to existing steel framing with plain 40 mm lap joints with reveted or welded seams, including bending or turning up, mitred angles, door handles, hinges, locks as required on site etc all as specifed and directed. |
| 77 | M&L for servicing /cleaning of solar water heater, complete i.e. Hot water Tank, Evacuated Tubes, Flat Plate tubes, SDR, UPVC Pipes, checking all working parts and removing of unservicable parts and installation new spares as required on site, comlpete all as specified and directed.NOTE:- Parts replaced shall be measured and paid seperately as supply only aganist the appropriate item. |
| 78 | Taking out the broken, rusted solar panels/solar tube frames with supporting angles of any size and M & L for mild steel work of grade Fe-290 (Grade E-165) in stand for solar panel, tank from angles, flats etc all as directed, framed brackets or angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessar, gusset plates, riviting etc. complete all as specified and directed. |
| 79 | S&F in repairs, of 20mm dia CPVC pipes (Hot & Cold type) SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling/trenches or laying in floors complete all as specified and directed. |
| 80 | S&F in repairs, of 25mm dia CPVC pipes (Hot & Cold type) SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling/trenches or laying in floors,complete all as specified and directed. |
| 81 | S&F in repairs, of sub main wiring with 2 runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 volt grade as earth lead drawn through in and includingnon metallic PVC conduit of size 20 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealedin wall includingaccessories like bends, tees junction boxes, etc fixed in wall or ceiling etc complete all as specified and directed. NOTE: Two runs of submain wiring cable alongwith one earth wire & conduit shall be counted as one unit. |
| 82 | M&L for disconnecting and taking up or down the existing old solar evacuated tubular collector of any description/of 100 to 300 LPD solar system for cleaning the glass by washing with using soft detergent, cleaning and de-scaling the inside surface of copper fins/tubes with suitable size of drill rod, wire brush & with circulating concentrated de-scaling solution for removing deposits/scale for effective heat transmission and reassembling the solar system after servicing/maintenance including nuts, bolts & wahsers gaskets, cemet & welding work for fixing if required, including refixing to the same position after repair, complete all as specified and directed.Note:- The quoted rate included the cost of new gaskets required during assembling/installaiton. |
| 83 | All as per Srl item No 79 here in before but for 500 to 1000 LPD solar system |
| 84 | S&F in repairs broken flat collector plates tinted glass of solar panel size 2025 mm (Length) x 1025 mm (width) with new one including lifting from floor to roof of the building by manually or mechanically is included in the coated rates,complete all as specified and directed. |
| 85 | S&F in repairs for Rubber flexible Hose pipe of inner dia upto 25mm as per existing heat resistance type suitable for Solar plant of different capacity with suitable clamps, nut and bolts,complete all as specified and directed. |
| 86 | S&F in repairs water heating elements of capacity 2.0/3.0 KW for solar water heater, complete all as specified and as directed. |
| 87 | S&F in repairs, of thermostat for solar water heater complete all as specified and directed. |
| 88 | S&F in repairs, evacuated tubes twin borosilicate glass collector for solar water heater (length and size as per existing sample) including taking down old broken, one complete all as specified and directed.Note:-Shifting of items from ground floor to roof of building manually or mechanically shall be deemed to be included in the quoted rates. |
| 89 | Attending complaint by deploying skilled Electrician /Plumber and Helper for checking electric motor, startor, Solar water heater and washing machine cum hydro extrator, tumbler and make itfunctionable and serviceable. Note:- (i) If contractor fail to attend complaint and resolve on same day an amount of Rs 1000.00 per day shall be recovered as penalty by department.(ii) All materials required for attending the complain shall be measured andpaidseperately, however T&P shall be included in rate quoted. |
| 90 | S&F in repairs lagging to hot water pipe of superior quality of foam insulation nitrile rubber of thickness not less than 20mm, duly covered with aluminium foil of not less than 0.2mmand binded with suitable size of wire/netas required on site, complete all as specified. |
| 91 | S&F in repairs PP-R Ball valves (brass insert) of size for 20mm dia CPVC pipes as per requirement of the site, complete all as specified and directed. |
| 92 | S&F in repairs PP-R Ball valves (brass insert) of size suitable for 25mm dia CPVC pipes as per requirement of the site,complete all as specified and directed. |
| 93 | S&F in repairsRotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 25mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, complete all as specified and directed. |
| 94 | S&F in repairs for 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 95 | S&F in repairsfactory made sheet enclosure for MCB DB SPN 2 way without bus bar 240 volts with single door, IP-43 protection duly fixed / concealed in wall complete and making good disturbed surfaces of wall floor etc including necessary connecting lugging with copper lugs pin / ring type complete all as specified & directed. |
| 96 | S&F in repairs, MCB SPN, 240 Volts, from 32 to 40 Amps with repturing capacity 10 KA \"C\" seriescomplete all as specified and directed. |
| 97 | S& F in repairs Solar water Heater Tank of Cap 100 ltr of existing shape and size/ type suitable for existing solar water heating system alongwith atleast 5 years of manufacturer\"s warranty.Note : Contractor shall provide the gurrantee of the manufacturer alongewith his own gurrentee. |
| 98 | S&F in repairs, Solar water Heater Tank of Cap 200 ltr with atleast 5 years of manufacturer warranty, complete all as specified and directed.Note : Contractor shall provide the gurrantee of the manufacturer alongewith his own gurrentee. |
| 99 | M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete/sunken floors, including demolation of existing PCC of any description, complete all as specified and directed. |
| 100 | M&L for general servicing of washing/Laundary machine of capacity upto 30 KG by dismantalling all movable/revolving mechanical parts such as (Nut, bolt, washer, gland, greasing for motor) servicing / checking of electronic mechanism all circuits,wiring,push Button, controller, other electrical parts such as Heating element, thermostat, contactor, relays, MCCB, MCB etc. and rewinding of motor with reassembling all parts after necessary servicing and replacement in case of unsv parts, testing machine upto 1 hour of working all as required and directed including replacement of following unservicable spare parts, complete all as specified and directed. NOTE:- (i) This Rate is Inclusive of rewinding of machine motors. (ii) Parts such as heating element thermostate contactor, relays, MCCB etc. shall be measured and paid separately. |
| 101 | S&F in repairs, of the following parts (against Item No-98.01 to 98.11) of Washing Machine cum hydro extractor of capacity 30 kgs- 04 Nos for servicing, greasing and gland packing for Motors and testing after completion of work all as specified and directed. |
| 102 | Push button with push button element for washing machine of cap 30 Kgs as per sample, complete all as specified and directed. |
| 103 | DTC and TC each for washing machine of cap 30 Kgs as per sample, complete all as specified and directed. |
| 104 | Timer 0 to 60 min for washing machine of cap 30 Kgs as per sample, complete all as specified and directed. |
| 105 | Reversing timer for washing machine of cap 30 kgs, complete all as specified and directed. |
| 106 | Stainless steel plate complete for washing machine of cap 30 kgs as per sample, complete all as specified and directed. |
| 107 | Pressure switch suitable for 30 Kgs washing machine as per sample, complete all as specified and directed. |
| 108 | Toggle switch for washing machine 30 Kgs motor as per sample, complete all as specified and directed. |
| 109 | Single phase preventer suitable for washing machine of cap 30 Kgs as per sample, complete all as specified and directed. |
| 110 | S&F of LS Contractor 3 pole 220 volts 32 Amps suitable for 30 Kgs washing machine as per simple, complete all as specified and directed. |
| 111 | Gland dori,replacement of fan belt and greasing etc for washing machine of cap 30 kgs as per sample, complete all as specified and directed. |
| 112 | IBLAR sleeves for 30 Kgs washing machine as per sample, complete all as specified and directed. |
| 113 | M&L for General Servicing of washing machine Tumbler Dryer of capacity upto 30 KG by dismentalling all movable/Revolving mechanical parts such as (Nut, bolt, washer, gland, greasing for motor) servicing/checking of electronic mechanism all circuits, wiring, push button, controller, other electrical parts such as Heating Element, Thermostat, contactor, Relays, MCCB, MCB etc. and also including rewinding of motor with reassembling all parts after necessary servicing and replacement in case of unsv parts, testing machine upto 1 hr of working all as required and directed including replacement of following unservicable spare partsNOTE:- (i) This Rate is Inclusive of rewinding of machine motors. |
| 114 | S&F of the following parts (Item No 100.01 to 100.09 ) toof Washing Machine Tumbler Dryer 25 Kgs- 04 Nos 3 phase 415 volts, 50 Hz AC complete and servicing, greasing and gland dori for Motors, and testing after completion of work, all as specified and directed. |
| 115 | Single phase preventer suitable for 25 Kgs Washing Machine Tumbler Dryer as per sample |
| 116 | Rubber seal and fan belt for 25 Kgs Washing Machine Tumbler Dryer as per sample |
| 117 | Strip heater for washing machine 25 Kgs Washing Machine Tumbler Dryer as per sample |
| 118 | Presser switch pipe suitable for 25 Kgs Washing machine Tumbler Dryer as per sample, complete all as specified and directed. |
| 119 | LS Contractor 3 pole 220 Volts 40 Amps suitable for 25 Kgs Dryer as per sample, complete all as specified and directed. |
| 120 | Relay 2.5 Amps to 8 amps for Dryer Machine Motor as per sample, complete all as specified and directed. |
| 121 | Stainless Steel Spring assy for 25 Kgs Laundry Machine and Dryer assy as per sample, complete all as specified and directed. |
| 122 | Door Open/Close sensor for Laundry Machine and Dryer of Capacity 25 Kgs as per sample, complete all as specified and directed. |
| 123 | MCB Four pole 63 Amps suitable for existing LT panel board to control of Dryer Machine of capacity 25 Kgs as per sample, complete all as specified and directed. |
