Tender For Macadamization Of Thalora Pingla Mata Road Under City And Town
Tender Value
70 Lakhs
Estimated cost
Bid Submission
02 Nov 2024
0 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
majalta → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Macadamization Of Thalora Pingla Mata Road Under City And Town
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting graded stone aggregate (sizerange 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as perspecifications and directions of Engineer-in-Charge |
| 2 | Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg/sqm. |
| 3 | Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On .B.M. @ 0.75 Kg/sqm. |
| 4 | Providing and laying bituminous macadam using crushed stone aggregatesof specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity |
| 5 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately) With paving Asphalt grade VG-30 with no solvent |
| 6 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-30 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 7 | Providing and applying 2.5 mm thick road marking strips (retro-reflective)of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, drivenby experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge andaccordance with applicable specifications |
| 8 | BERM FILLING BY WAY OF PROVIDING AND LAYING WATERUNG AND COMPACTING IN LAYERS NOT EXCEEDING 200MM THICK WITH80-100KN ROLLER, rbm / free of organic material mixed withn coardes aggergate . Round nallah shingle max. agg size 75mm thick incld carriage from source to site of work incld. allm leads and lifts |
| 9 | Manufacturing supplying and fixing retro reflective overhead signageboards made up of 2mm thick aluminum sheet, face to be fully coveredwith high intensity and encapsulated lens type heat activated retroreflective sheeting conforming to type-III of ASTM-D-4956-01 asapproved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001in silver white with blue colour background and with high intensity grade,pasted on substrate by pressure sensitive adhesive backing which shall beactivated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means ofsuitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c allalong the periphery as well as in two vertical rows along with theftresistant measures including the cost of painting with two or more coats ofepoxy paint in grey colour on the back side of aluminum sheet includingappropriate priming coat. The rate includes the cost of rounding off thecorners, lowering down the structural frame work from the gantry, fixing |
| 10 | Carriage of Sandavg. lead upto 20 km by MT |
| 11 | Carriage of Stone Aggregate below 40 mm nominal size avg. lead upto 20 km by MT |
AI Tender Summary
Tender Timeline
Oct 23, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender