Bids Are Invited For Mtr, Sc, 415V, 400, 750Rpm, 354Kw 50110101050411 MTR,SC,415V,400, 750RPM,354KW ELECTRIC MOTOR TYPE : SQUIRREL CAGE VOLTAGE : 415V+10%/-15% FREQUENCY : 50HZ+/-6% FRAME SIZE : 400 DUTY CYCLE : S4,40%CDF MOUNTING : B3 INSULATION CLASS : H NO OF POLES : 8 POLE ENCLOSURE : IP55 AMBIENT TEMPERATURE : 60DEG.C DIRECTION, ROTATION : BIDIRECTIONAL METHOD OF COOLING : IC411 SPEED : 750RPM(SYN) POWER, RATED : 354KW MOTOR ,LT, TEFC,SCR, INVERTER DUTY, FRAME: 400, 8 POLE, OUTPUT: 354 KW,415+10%,-15%, 50 HZ+/-6%, UNEARTHED SYSTEM, SYNCH SPEED: 750 RPM, FOOT MOUNTING: B3,COOLING: IC411, ENCLOSURE PROTECTION: IP55, DIRECTION OF ROTATION : BIDIRECTIONAL, AMBIENT: 60 DEG C, INSULATION : CLASS H, BUT TEMP RISE LIMITED TO CLASS F, DUTY:S4, CDF:60%, STALL TIME HOT/COLD:15/25 SECONDS, TST/ TR=2.1, TPO/TR=2.6, ANTI FRICTION BEARING L10/40,000HRS, LUBRICATION: REGREASING WITH OUTLET COLLECTION,EFFICIENCY & P.F AT RATED LOAD: 95% & 75% MIN, TB POSITION: TOP RIGHT,CABLE ENTRY:LHS, VIEWED FROM DE, PROVISION FOR INTERCHANGEABLE TO TOP LEFT/ TOP, ROATABLE IN STEPS OF 90 DEG, ACCESSORIES: 1.WINDING TEMPERATURE DETECTOR: 2X160OC PTC/PHASE, 2.SPACE HEATER, 3.CI FAN,4.BTD¿S 2XPT100 SIMPLEX 2WIRE, TERMINAL BOX CABLE CAPACITY:2X6 TERMINALS,4RX3.5CX400 SQ. MM, TBS FOR PTC, BTD & ACH, APPLICATION: HOIST DRIVE-EOT CRANE, VVVF FED SUITABILITY: FULL RANGE SPEED VARIATION., NDE BEARING TO BE INSULATED. APPLICABLE STANDARDS: IEC 60034-1,17,18& IS 15881- 2009,DIMENSIONAL DATA : AS PER IS 8223, DE SHAFT EXT: DIA 110M6X210 WITH PROTECTED CENTRE HOLE M24X50,NDE SHAFT: DIA 90M6X170 WITH PROTECTED CENTRE HOLE M24X50 AND 2XM12X40 TAPPED HOLES ON PCD 60, A:710, B:900, C:224, HD:1230+/-30,L:1800+/-30,LC:2000+/-30, CENTRE LINE OF MTB FROM DE SHAFT END( LE) :600+/-20, ALL VALUES IN MM, COMPLETE DIMENSION OF THE MOTOR IS AS PER REPLACEMENT SPECIFICATION DRAWING . DRAWING NO : R.S-8.00.1391 Total Quantity : 1
