Tender For Supply Installation And Commissioning Of Lab Equipment For Electronic Engg Dept
Tender Overview
Project Description
Supply Installation And Commissioning Of Lab Equipment For Electronic Engg Dept , Amplitude Modulationdemodulation Kit Carrier -40Khz, Amplitude 2V Modulating Signal- 20Hz To 20Khz ,Amplitude0 To 3V With On Board Supply0-5V , Frequency Modulation & Demodulation Trainer Kit Fm Modulation Using Vco Modulator Reactance Modulator & Varactor Modulator Transmitter Frequency Up To 455Khz Fm Demodulator Using Detuned Resonant Detector, Quadrature Detector, Fooster Seeley Detector, Ratio Detector &Pll Detector (Modulating Signal-2Khz To 4 Khz ,Amplitude 3V)Fm , Ssb Sc Ammodulation And Demodulation Trainer Kit Mod-14 On Board Modulation & Demodulation Circuit Wide Frequency Response Upto 100Mhz , Dsb Sc Modulation And Demodulation Trainer Kit Receiver Ckt Consist Of Rf Amplifier, Mixer, Local Oscillator, Bfo,If Amplifier-1, If Amplifier-2 Diode Detector For Dsb & Product Detector For Ssbfrequency Range 300 Hz To 3.4 Khz , Superheterodyne Fm Radio Receiver Trainer Kit Frequency Range Mw-520-1620Khz,Intermediate Frequency:455Khz,Input Circuits : Rf V Amplifier, Mixer, Local Oscillator, If Amplifier, Tuning With Variable Capacitor, Detector With Agc Control. , Load Measurement Using Strain Gauge Kit Transducer: Resistive Load Cell Load In Weights Can Be Measured Upto 3 Kgs Primary Excitation Voltage Of 12V Dc Measurement Option: Output Available On 2Mm Banana Sockets For Monitoring Onboard Features: Provided With Excitation Voltage Interconnections: 1.Test Points Are Provided To Analyse Signals At Various Points 2.In-Built Power Supply Of+5V/1.5A, ± 12V , Speed Measurement Kit Transducer/ Sensor- Magnetic Pickup Using Inductive Proximity Switch Transducer Measurement Option: 1.On-Board Digital Panel Meter Provided 2. Output Available On 2Mm Banana Sockets For Monitoring Onboard Features:Onboard Microcontroller With Seven Segment Display For Rpm Calculation Interconnections: 1. All Interconnections Are Made Using 2Mm Banana Patch Cords 2.In-Built Power Supply Of+5V/1.5A, ± 12V , Displacement Measurement Using Lvdt Trainer Transducer:1) Lvdt Tranducer With Transparent Enclosure 2) Displacement Of ± 5Mm 3) Primary Excitation Voltage Of Sine Wave 1V P-P Measurement Option: 1) Onboard Digital Panel Meter Provided 2) Output Available On 2Mm Banana Sockets For Monitoring 3) Screw Gauge For Reference Displacement Reading Onboard Features: Provided With Excitation Voltage Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords2.Test Points Are Provided To Analyse Signals At Various Points 3. Set Of 2Mm Patch Cords For Interconnections , Waterlevel Indicator Kit Transducer: 1) Capacitive Level Transducer 2) Level Measurement Upto 150Mm Is Possible Measurement Option: 1) Onboard Digital Panel Meter Provided 2) Output Available On 2Mm Banana Sockets For Monitoring 3) Screw Gauge For Level Measurement Onboard Features: 1Ft Scale Is Provided For Level Measurement Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords2. Set Of 2Mm Patch Cords For Interconnections , Temperature Measurement Using Thermistor Kit Transducer/ Sensor- 1) Ad590/Thermistor Sensor Is Used 2) Temperature Measurement Upto 110 °C Measurement Option: 1.On-Board Digital Panel Meter Provided 2. Output Available On 2Mm Banana Sockets For Monitoring 3. Thermometer For Measurement Of Temperature Onboard Features: Onboard Instrumentation Amplifier Provided Interconnections: 1.All Interconnections Are Made Using 2Mm Banana Patch Cords 2. Test Points Are Provided To Analyze Signals At Various Points 3. All Ics Are Mounted On Ic Sockets 4. Set Of 2Mm Patch Cords For Interconnections , Led Colour Tv Remote Control Display Type :Led, Hd, Screen Size:20 Inch Display Resolution:1600 X 900 Contrast Ratio:Dynamic Contrast Ratio (1000:1), Brightness:300 Cd/M2 Viewing Angle:160(H) X 160(V), Refresh Rate:60 Hz Video Interface: Video Input/ Vga Input, Audio Analog Video Input, Audio Interface: Rca L & R
BOQ
| Sl. No. | Item Description |
| 1 | Amplitude ModulationDemodulation KitCarrier -40KHz, Amplitude 2V Modulating Signal- 20Hz to 20KHz ,Amplitude0 to 3V with on board supply0-5V |
| 2 | Frequency Modulation & Demodulation Trainer Kit FM Modulation using VCO Modulator Reactance Modulator & Varactor Modulator Transmitter frequency up to 455KHzFM Demodulator using Detuned Resonant detector, Quadrature detector, Fooster Seeley Detector, Ratio Detector &PLL detector (Modulating signal-2KHz to 4 KHz ,Amplitude 3V)FM |
| 3 | SSB SC AMModulation and Demodulation Trainer Kit MOD-14on board Modulation & demodulation circuit wide frequency response upto 100MHz |
| 4 | DSB SC Modulation and Demodulation Trainer KitReceiver CKT consist of RF Amplifier, Mixer, Local Oscillator, BFO,If Amplifier-1, If Amplifier-2 Diode detector for DSB & Product Detector For SSBfrequency range 300 Hz to 3.4 KHz |
| 5 | Superheterodyne FM Radio Receiver Trainer KitFrequency range MW-520-1620Khz,Intermediate Frequency:455KHz,Input Circuits : RF v Amplifier, Mixer, Local Oscillator, IF Amplifier, Tuning with variable capacitor, Detector with AGC control. |
| 6 | Load Measurement using Strain Gauge Kit Transducer:Resistive Load cell Load in weights can be measured upto 3 KgsPrimary Excitation Voltage of 12V DCMeasurement Option: Output available on 2mm Banana sockets for monitoringOnboard features: Provided with excitation voltageInterconnections: 1.Test points are provided to analyse signals at various points 2.In-Built Power Supply of+5V/1.5A, ± 12V |
| 7 | Speed Measurement KitTransducer/ Sensor- Magnetic Pickup using Inductive proximity Switch TransducerMeasurement Option: 1.On-board Digital Panel Meter provided 2. Output available on 2mm Banana sockets for monitoringOnboard features:Onboard Microcontroller with Seven Segment Display for RPM calculation Interconnections: 1. All interconnections are made using 2mm banana Patch cords 2.In-Built Power Supply of+5V/1.5A, ± 12V |
| 8 | Displacement Measurement using LVDT TRAINER Transducer:1) LVDT Tranducer with transparent enclosure2) Displacement of ± 5mm 3) Primary Excitation voltage of Sine wave 1V p-pMeasurement Option: 1) Onboard Digital Panel Meter provided 2) Output available on 2mm Banana sockets for Monitoring3) Screw Gauge for reference displacement readingOnboard features: Provided with excitation voltageInterconnections: 1.All interconnections are made using 2mm banana Patch cords2.Test points are provided to analyse signals at various points 3. Set of 2mm Patch cords for interconnections |
| 9 | WaterLevel Indicator Kit Transducer: 1) Capacitive Level Transducer 2) Level Measurement upto 150mm is possible Measurement Option: 1) Onboard Digital Panel Meter provided 2) Output available on 2mm Banana sockets for Monitoring 3) Screw Gauge for level measurementOnboard features: 1ft scale is provided for level measurementInterconnections: 1.All interconnections are made using 2mm banana Patch cords2. Set of 2mm Patch cords for interconnections |
| 10 | Temperature Measurement using Thermistor KitTransducer/ Sensor- 1) AD590/Thermistor Sensor is used 2) Temperature Measurement upto 110 °CMeasurement Option: 1.On-board Digital Panel Meter provided 2. Output available on 2mm Banana sockets for monitoring 3. Thermometer for measurement of temperatureOnboard features: Onboard Instrumentation Amplifier providedInterconnections: 1.All interconnections are made using 2mm banana Patch cords 2. Test points are provided to analyze signals at various points 3. All ICS are mounted on IC sockets4. Set of 2mm Patch cords for interconnections |
| 11 | LED Colour TV remote controlDisplay Type :LED, HD, Screen Size:20 Inch Display Resolution:1600 X 900 Contrast Ratio:Dynamic Contrast Ratio (1000:1), Brightness:300 cd/m2 Viewing Angle:160(H) X 160(V), Refresh Rate:60 HzVideo Interface: Video Input/ VGA input, Audio analog video input, Audio interface: RCA L & R |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender