|
| 1 | Separating & Throttling Calorimeter with mini boilerFEATURES:• determining the vapour content usingo a separating calorimeter with cyclone water separatoro a throttling calorimeter with vapour depressurization• using an h-s diagramSPECIFICATIONS:Supplied vapour• temperature: 240°C• pressure: 10barSafety valve: 10barMeasuring ranges• temperature: 0…400°C• pressure (inlet): 0…16bar• pressure (outlet): -150…100mbar230V, 50Hz, 1 phase230V, 60Hz, 1 phase120V, 60Hz, 1 phaseDIMENSIONS AND WEIGHT:• L x W x H: 800x 800 x 1700 mm• Weight (approx.): 110 KG |
| 2 | Steam Turbine Power Plant SetupFEATURES• steam power plant and its components• start-up, operation and shut down of a steam power plant• closed steam-water circuit with feed water treatment• among others, determining:o boiler efficiencyo mechanical/thermal efficiency of the turbineo condenser efficiencyo specific fuel consumption of the plantSPECIFICATIONSteam generator• steam output: 200kg/h at 11bar• fuel consumption: 12L/h• heat-up time: 8min• pressure: 13barSuper heater• power: 7kWSingle-stage axial turbine with Curtis wheel and hydraulic speed regulator• power: max. 1,5kW at 3000min-1Water-cooled condenser• cooling capacity: 98kW• transfer surface: 2,5m2Measuring ranges• temperature: 9x 0…400°C, 2x 0…100°C• flow rate: 0…167L/min (cooling water)• pressure: 3x 0…16bar, 1x ±1bar• torque: 0…20Nm• speed: 0…4000min-1400V, 50Hz, 3 phases400V, 60Hz, 3 phases, 230V, 60Hz, 3 phasesDIMENSIONS AND WEIGHT• L x W x H: 3500x 2500 x 2250 mmWeight (approx.): 2250 KG |
| 3 | Rotary Air Compressor Test BenchFEATURES:• To study all components/Accessories used in rotary Air Compressor.• To study & determine Isentropic Work, Actual Work Volumetric• Efficiency, Isentropic Efficiency & Free Air Delivery at different delivery pressure.• To Plot Volumetric Efficiency/Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.Observations can be taken by air compressed in storage& free condition.• Instrumentation: sensors with digital displays• software for data acquisition via USBSPECIFICATIONS:• Vane compressor – Rotary compressor, driven by 3 HP motor.• Calibrated orifice meter with water manometer to measure air intake.• Energy meter to measure input of the meter.• Pressure gauge to measure discharge pressure.• Control valve at delivery side.• Stop clock.DIMENSIONS AND WEIGHT:• L x W x H: 1500x 1500 x 1250 mmWeight (approx.): 320kg |
| 4 | Marcet Boiler Test ApparatusFEATURES:• recording the vapour pressure curve of water• presentation of the relationship between pressure and temperature in a closed system• temperature and pressure measurementSPECIFICATION:Bourdon tube pressure gauge: -1…24barTemperature limiter: 200°CSafety valve: 20barHeater: 2kWBoiler, stainless steel: 2LMeasuring ranges• temperature: 0…200°C• pressure: 0…20bar230V, 50Hz, 1 phase230V, 60Hz, 1 phase120V, 60Hz, 1 phaseDIMENSIONS AND WEIGHT:• L x W x H: 800x 600 x 600 mmWeight (approx.): 45 KG |
| 5 | Rope Brake DynamometerPower 0.5 kWVoltage 220 VPhase Single PhaseFrequency 50 HzMaterial Stainless SteelWheel Size 45 cm |
| 6 | Cam Analysis Apparatus Capacity 7. 5 hpPhase 3 PhaseSpeed 1500 rpmFrequency 50 HzMaterial Stainless Steel 304Color Blue |
| 7 | Slip Gauge Set steel sets with high wear resistance.47 & NABL CalibrationSlip Gauge Set steel sets with high wear resistance. High level accuracy and reliability of measuring results are guaranteed by precise calibration. Provided with NABL traceability if required. Sets of M46, M87, M112. Metric/Imperial. |
| 8 | Bevel ProtectorBlade length 150mm W/60, 40degree edges, required stand and type |
| 9 | Sine Bar Range 200mm for checking concentricity, run out of sharpness taken & degree checking |
| 10 | Digital Outside MicrometerSpecification range 0-25mm |
| 11 | Digital Vernier CaliperSpecification range 0-150mm/6” |
| 12 | Radius GaugeRadius Gauge 1-7mm |
| 13 | Surface Plate Granite“A” Grade 24 x 36 inch in a Class granite |
| 14 | Mechanical Comparator Analog type with Dial Gauge & StandMechanical Comparator Analog type with Dial Gauge & StandAvailable in two modelsMeasuring base size of: 125mm x 125mm and 60mm ø.Material: Hardened Tempered & Precision Ground Alloy Steel.Vertical Range: 130 mm & 130 mm.Horizontal Displacement : 40 mm.Throat Depth : 130 mm & 45 mmPillar Diameter: 31 mm.Net Weight: 11.500Kgs & 2.500 kgs.Mitu toyo 7011S-10 magnetic stand & dial gauge 20465, 0.01mm x 10mm Dial indicator 0-100 *** back |
| 15 | Thickness GaugeMeasuring range: 0 – 30 mmJaw: 50 mmResolution: 0.1 mm |
| 16 | Gear Tooth MicrometerLeast Count: 0.01” or 0.02mm |
| 17 | Optical flat with Monochromatic check light to check surface flatness• Dia / thickness: 45 mm / 12 mm• Flatness: 0.002 mm (0.2 µ)• Monochromatic light source: 35 watts sodium lamp• Application: Micrometer calibration / mechanical flatness inspection |
| 18 | Bench Micrometer for screw thread Measurement• 0 – 25 mm Digital Bench Micrometer• Accuracy: ±0.001 mm• Material: Stainless Steel |
| 19 | Standard wire gaugesImperial standard wire gauge used with wire and sheet metal as per BS: 3737:1964 |
| 20 | Straight edges• Length: 150 mm• Section: 60oVee |
| 21 | SNAP GAUGE• Measuring range: 0 – 50 mm• Material : Carbide• Shape: ‘C’ shape• Accuracy: 0.001 mm• Size: 2 inch |
| 22 | PLUG GAUGE• 20 MM [H7]• GO / No GO Plan plug gauge• +0.01mm / +.005 mm GO tolerance• +0.019 mm / +0.023 mm No GO tolerance |
| 23 | RING GAUGE• 20 mm [h7]• GO / No GO Plan ring gauge• +.001 mm / +0.005 mm GO tolerance• +0.019 mm / +0.023 mm No GO Tolerance |
| 24 | Pneumatic cum Electropneumatic System Trainer The complete trainer mounted on table top anodized sturdy light weight with aluminium profile grooved plate experiment board with flow and pressure regulator unit with pressure gauge (10 bar),1/4” BSP(F)Manifold 4 way ¼” BSP (F) with on/off 4 nos. ball valve.One way flow control adjustable valve ¼”BSP (F)Air compressor: working pressure 7 bar;230v/50Hz,1ph with shutoff valve, safety valve and storage tank 30-50LtrControl elements: 3/2 way directly actuated valve with push button, 3/2 way single solenoid 24VDC, 5/2 way pilot operated spring return valve ¼”BSP(F), 5/2 double solenoid valve 24VDCActuating devices: single acting cylinder bore 25mm, stroke 100mm, double acting cylinder bore 25mm, stroke 100mm, Bidirectional air motor (Vane type) |
| 25 | Sensor/Transducer Trainer KitSensor/transducer trainer kit designed with ABS injection moulded sturdy electronic desk withinput power supply of 230v,50 Hz Built in Output power supply: +/- 12V, 500mA, variable 5V to 14 V @3Amp provided with following sensors:a) Pressure: piezo resistive transducer for pressure measurement( 0 to 15psi) with pressure generating hand pump,signal conditioner and proper patching cords.b) Force/Weight measurement: strain gauge type (0 to 10 kg) with signal conditioner and output for multimeter displayc) Displacement sensing: sliding pot (0-50 mm), rotary Pot(0 to 1800) and LVDT transducer(0 to 20mm) with signal conditioner and proper output to read with digital multimeter.d) Level measurement: Float type(0 to 100mm) with signal conditioner and outpute) Speed sensor: 12 V DC motor (0-1500rpm) With optical sensor3 ½ digit digital Display |
