Tender For Maintenance Of Water Supply ( Two Year Repairing V.T Motor, Transformer, Starter, Tpmo And Other Allied Electrical Work In Sector-1 To 7 And Village Harola) Noida, 1 Rewinding Of Vt Motor & Booster Motor (Centrifugal Motor) Kirloskaer Make / , noida-Uttar Pradesh

Tender For Maintenance of Water supply ( Two Year Repairing V.T Motor, Transformer, Starter, Tpmo And Other Allied Electrical Work In Sector-1 To 7 And Village Harola) Noida, 1 Rewinding of VT Motor & Booster Motor (Centrifugal Motor) Kirloskaer make / Equivalent make as per original winding 415 volt with super enamelled copper wire as required gauge complete all respect as per direction of Engineer incharge. It is also include the dismentling / Refixing / Catage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR)40 HP 2 S/F Thrust bearing SKF make No. - 7220 3 S/F Ball bearing SKF make No. - 6311 4 Repairing of 30-50 HP ATS starter including changing of No volt coil, over load coil, movving contact, D contact & Finger contact etc. complete operation. 5 S/F rachit plate with Goli as per requirement of VT motor at site as per direction of E/I 6 Rewinding of 63 KVA transformer i/c LT/HT burnt coil and changing of LT/HT bushing i/c gasket and filling oil testing, commissioning and transportation of transformer factory to site and vice versa complete in all respects. 7 Dis / Re-erection of 63 KVA transformer with the help of crane machine including cartage from the site to as per ISS including fees as per direction of E/I 8 S/F of 3 Pole Power Contactor AC3 95 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 9 S/F of 3 Pole Power Contactor AC3 110 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 10 S/F of 3 Pole Power Contactor AC3 185 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 11 S/F of 3 Pole Power Contactor AC3 225 Amp. (MAKE- L&T / SIEMENS / SCHNIEDER) 12 S/F of Ampere meter (MAKE-AE/PROCOM/CONZERVE) 13 S/F of Voltmeter (MAKE-AE/PROCOM/CONZERVE) 14 S/F of Indicating light (Blue & White) (MAKE-ESBEE / SIEMENS / CONZERVE) 15 S/F of Push Button (MAKE-ESBEE / SIEMENS / SCHNIEDER) 16 S/F of APFCR Relay 5 Amp. 415V 3 Stage (MAKE- L&T / SIEMENS / SCHNIEDER) 17 S/F of timer make L&T make. 18 S/F MPD make Soft Hard 19 S/F VPD make Soft Hard 20 S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grade at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sqmm 3½ core 21 120 sqmm 3½ core 22 400 sqmm 3½ core 23 S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL make complete in all respects as per direction ofE/I. 24 S/F of out door type 11 KV fuse set Ralco/Rama make with insulator Jai shree/BHEL make complete in all respects as per direction ofE/I. 25 Supply & Erection of 11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc as required. 26 Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. 27 S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. 70 Sqmm 28 120 Sqmm 29 400 Sqmm 30 Supply & Fixing Flat Cable 35 Sqmm. 3 Core Finolex make. 31 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required ……….120 sq.mm (Outdoor) 32 240 Sqmm (Outdoor) 33 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required ….120 sq.mm 34 240 Sqmm 35 Supply and Fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 60 to 72 watt. Confirming to IP 66 protection complete in all respects. 36 Supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality. 37 Rewinding & repairing of Transformer Kirlosker make / Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in Charge. It it also include the dismantling / Refixing/Cartage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR)

INR 2124 /-

INR 83800.0 /-

INR 41.88 Lakhs /-