|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved makeof JINDAL, HINDALCO. NALCO conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 2 | For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 3 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately),Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 4 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation ofhandles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete of SAINT GOBAIN as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 6 | With float plain/frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 7 | Providing and fixing 4mm thick bakalight tile/sheet in aluminium shutter with aluminium beading and rubber/gasket complete as per direction of Engineer - In - Charge including entire carriage of materials upto all leads, lifts and cost of other incidentals. |
| 8 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer(Doorset, Hetich) (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 9 | Providing and fixing 250 X 16 mmsize aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 10 | Providing and fixing125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 11 | Providing and fixing 1 50 mm X 10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 12 | Providing and Fixing Door Stopper Rubber Type with necessary screws etc complete as per direction of Engineer- in charge including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 13 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 14 | Providing and applying white cement based putty of (J K WALL PUTTY)average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 15 | Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. (One or more coats on old work )Make of BURGER,BRITISH PAINT , NEROLAC.of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification i/c entire carriage of material upto all leads lifts and heigts. |
| 16 | Providing and fixing white vitreous china laboratory sink of (Parryware, Hindware)Size of600x450x200 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 17 | Providing and fixing 3 way Lab tap of (Parryware, Hindware) Faucet(SH-233C of Tech Safe or its equivalent ), brass electroplated, chemical resistant, table mounted with nozzle arrangement complete including entire carriage of material in all leads and lifts. |
| 18 | Providing and fixing CP Waste Coupling for wash basin and sink,of approved quality and colour.32 mm diaincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 19 | Providing and fixing(Flexible pipe. 32 mm dia ) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 20 | Providing and fixing15mm nominal bore C.P. brass angle valve (SIECO,PARRYWEARE) for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 21 | Providing and fixing 15 mm dia nominal bore G.I. Pipesof(JINDAL)complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wallincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 22 | Providing and fixing15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 23 | Providing and fixing C.P.75mm grating with or without waste hole including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 24 | Providing, fixing, testing and commissioning of CAT 6, UTP LAN cable of Molex/ Schneider/D-Link/ Amp/R&M/Finolex/Legrand in the existing PVC/ steel conduit/trunking as requiredalongwith punching/crimping & permanet numbering both ends (patch pannels switch side and IO port Side) , connectorization of RJ 45 etc. including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 25 | Providing and fixing of 25mm dia PVC conduit (ISI Mark) along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required.The bends of conduit must be PVC or flexiable steel, steel saddle clamps etc including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 26 | Providing, installation testing and commissioning of CAT 6 Information outletcomplete in all respect includingBritish/American styleface plate( having shutter on I/O or Face plate to avoid dust) and surface mount Box back of Molex/ Schneider/ Amp/D- Link/Legrand in the existing PVC/ steel conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
| 27 | Providing, installation testing and commissioning ofCat 6 UTP Patch cord 1 mtr- from rack end of Molex/ Schneider/ Amp/R&M/Finolex/ D-Link/Legrand make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. |
