Tender For Re-Alignment Of Pressure Main At Alamgari Bazar Srinagar - Earth Work In Excavation By Mechanical Means(Hydraulic Excavator)Intrenchesfor Foundations, Drains, Pipes, Cables Etc.(Not Exceeding 1.5 Min Width) And For Shafts, Wells, Cesspitsand Th, srinagar-Jammu And Kashmir

Re-Alignment Of Pressure Main At Alamgari Bazar Srinagar - Earth work in excavation by mechanical means(hydraulic excavator)intrenchesfor foundations, drains, pipes, cables etc.(not exceeding 1.5 min width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides andrammingofbottomsliftupto1.5 m,includinggettingoutexcavatedearthand disposal of surplus excavated earth as directed, within a lead of 50 metresin All kinds of soil 2 Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 450mm dia ductile iron pipeK7 pipes 3 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket 450mm dia pipes 4 Manufacturing/fabricating/ providing / fixing of MS fittings viz bends tees, Collars etc made out of M.S Plates of required thickness excluding cost of lead caulking etc. The work should be leak proof and should be painted anticorrosive red oxide primer .The job is to be paid in fitted and finished from and is to be carried under directions of site engineer. 5 Providing of S&S centrifugally cast (spun) iron pipes (Class LA)conforming to IS - 1536 including supply rubber gaskets. 600 mm dia. Pipe 6 Providing of mechanical joint 600mm dia which can resist pressure upto 5kg/m2of standard make. Job includes all sorts of carriage, complete job along with Rubber Gasket 7 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead. 8 250mm 9 300mm 10 450mm 11 Supplying pig lead at site of work 12 Providing and fixing of MS Flange 12mm thick to 450 mm dia pipe line complete job 13 Dismantling of 450 mm dia DI pipe after laying permanent line including all sorts of lift and carriage upto departmental store complete job 14 Providing and fixing of GI pipes complete job excluding excavation and refilling 15 65 mm nominal bore 16 50 mm nominal bore 17 40mm nominal bore 18 25mm nominal bore 19 20mm nominal bore 20 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 21 65 mm nominal bore 22 50 mm nominal bore 23 40 mm nominal bore 24 25 mm nominal bore 25 20 mm nominal bore 26 Providing and fitting of D.I sluice valve of ISI Mark , the job includes all sorts of carriage etc. Make: Tailas, Kirloskar. 27 300mm D.I sluice Valve 28 250 mm D.I Sluice Valve(including Reducer) 29 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating eachdeposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. @ 80% of item no. 1 30 Providing and filling of materialsin trenches complete job @ 10 % OF Itemno 1. Stone Dust 31 Providing and fixing of reflective type SIGN Boards at construction site, complete job. (Required tern time to time subject to actual). 32 Providing and laying in position of Stone soling in horizontal on level including cost of soling. 33 Providing and laying in position cement concrete of specified grade excluding the cost of shuttering1:4:8 stone aggregate 20mm nominal size 34 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 35 Centering and shuttering including strutting, propping etc. and removal of form for 36 Foundations, footings, bases of columns etc. for mass concrete. 37 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 38 Suspended floors, roofs, landings, balconies and access platforms. 39 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more @ 1.2 Qtl / cum 40 Providing and fixing C.I. double acting air valve of approved qualitywith bolts, nuts, rubber insertions etc. completeincluding The tail pieces, tapersetc.50 mm dia. 41 Carriage of material from source upto the site of work by mechanical transport including loading, unloading and stacking complete for an average lead 42 Cement / steel Avg lead 2kms 43 Sand/ Stone Dustavg lead 15km 44 Stone agg Avg lead 12km 45 Stone Soling Avg. lead of 12 Km

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	28-10-2024	Extension 2	Date	05-11-2024

INR 1000 /-

INR 119000.0 /-

INR 59.50 Lakhs /-