Tender For Re-Electrification Of Type Ii, 12 No Residence (Res. No. 9 To 20) Under Pooled Housing Residantial Buildings At Sultanpur (U.P.).; 1 Wiring for light point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable insurface/recessedmediumclassPVCconduit,withpiano type switch, phenolic laminated sheet, suitable size M.S. boxand earthingthepointwith1.5sq.mm.FRLSPVCinsulated copper conductor single core cable etc. as required.Group-A DSR No.1.8.1 2 Wiring for fan point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable insurface/recessedmediumclassPVCconduit,withpiano type switch, phenolic laminated sheet, suitable size M.S. boxand earthingthepointwith1.5sq.mm.FRLSPVCinsulated copper conductor single core cable etc. as required.Group-A DSR No.1.8.1 3 Wiring for fresh air/exhaust fan point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable insurface/recessedmediumclassPVCconduit,withpiano type switch, phenolic laminated sheet, suitable size M.S. boxand earthingthepointwith1.5sq.mm.FRLSPVCinsulated copper conductor single core cable etc. as required.Group-A DSR No.1.8.1 4 Wiring for call bell point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable insurface/recessedmediumclassPVCconduit,with piano type switch, phenolic laminated sheet, suitable size M.S. boxand earthingthepointwith1.5sq.mm.FRLSPVCinsulated copper conductor single core cable etc. as required. Group-A DSR No.1.8.1 5 Supply and fixing of Metal box of 150mmX75mmX60mm deeep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A. Socket outlet and 5/6 A. piano type switch, connections, painting etc. as required. DSR No.1.29 6 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSPVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(a) 2x1.5 sqmm. + 1x1.5 sqmm. DSR No.1.14.1 7 (b) 2x2.5 sqmm. + 1x2.5 sqmm. DSR No.1.14.2 8 (c) 2x4 sqmm. + 1x4 sqmm. DSR No.1.14.3 9 (d) 2x6 sqmm. + 1x6 sqmm. DSR No.1.14.4 10 (e) 2x10 sqmm. + 1x6 sqmm. DSR No.1.14.5 11 Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect. CAT-AA2420 system lumens, >110 Lm/watt, PF>0.95, THD<10%, CRI>80, Tube with aluminium sink heat with 3 year warrantee. DSR No.23.07 12 Supply & fixing of water tight oblong 10 wattLED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity/ transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detacable driver set,open and short circuit protection, suitable for 24Hr continuous Operation, Compelete in all respect. CAT-AA1100 system lumens, 110 Lm/W, PF>0.95, CRI>70, with 3 years warrantee. DSR No.23.11 13 Supply and fixing ofSingle LED light wall Fixture suitable with 9 Watt LED Lamp B22 base. complete in allrespect. (Make-Havells & Model -1Nx9W LED Lamp/LHFOFTE1TZ1W012) (Analysis) 14 Supply and fixing of 10 Watt Lumiline wall mounted LED batten with polycarbonate housing. (Mirror Light). Complete in all respect. (Make-Havells & Model-LUMILINEBS10WLED865SPCWH) (Analysis) 15 Supplyingand fixing call bell/ buzzersuitable for singlephase, 230V, complete as required. DSR No.1.38 16 Supply,Intallation,Testing ,and commissioning of 1200 mm sweep BEE StarRated , ceiling Fans withBLDC Moter class of Insulation B ,3 No. Blades,30 cm long down rod ,2 no. canopies,shackle Kit, Safety rope ,copper winding, Power Factor not Less Then 0.9 ,service Value (CMM/W) minimum 6.00 Air Delivery minimum 210 Cum/Min ,350 RPM ((tolerance as per IS 374-2019 ) THD Less than 10% ,remote or Electronic Regulator unit for speedcontrol and all remaining accessorise includingsafty pin ,nut bolt washer, Temperature rise =75 degree C (Max) ,insulation resistance more than 2 mega om ,Suitable for 230 V, 50 Hz single phase A C , Supply earthing etc. complete as required . DSR No.19.1 17 Earthing withGI earth pipe 4.5 mtr long 40mm dia including accessories & providingmasonry encloser with cover plate havig loking arrangment & watering pipe etc. with charcoal/ coke and salt as required. DSR No.5.2 18 Providing and fixing of 25mmx5mm G.I. strip on surface or in recess for connections etc. as required. DSR No.5.15 19 Supply and fixing of 240 volts C Curve5A. To 32A. amp SPminiature circuit breaker suitable for inductive load of following poles in the existing MCB, DB complete with connection, testing and commissioning etc. DSR No.2.10.1 20 Supply and fixing of63 amp.DPMCB (10 KA) C-Series. Havells or Eq. (PCR) 21 Supply and fixing of 12 ways Double door SPN. distribution board, 240 V, recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (without MCB/Isolator) DSR No.2.3.3 22 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required. (For Switch fuse Unit.) DSR No.2.16 23 Supply and fixing of Metal box of 180mmX100mmX60mm deeep on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A. & 15/16 A. Socket outlet and 15/16 A. piano type switch, connections, painting etc. as required. DSR No.1.3 24 Supply and fixing of 20 A., 240V. SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A. C curve, SP, MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR No.2.18 25 Supply and fixing of Fresh Air Fan 300mm. (Qt.) 26 Supply and fixing of Exhaust Fan 300mm. (Qt.) 27 L/C of dismantling old Al. wiring and other requirement. (LS)
