Tender For Electrical Installation Work With Supply And Fixing Of Different Fittings And Fans At Icds Shishualay Inside Alipore Womens C Home

Sharing tender

Tender For Electrical Installation Work With Supply And Fixing Of Different Fittings And Fans At Icds Shishualay Inside Alipore Womens C Home-- 1 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2 2+14 way Enclosure [Make: Crabtree Enclosure (DCDKSHODCW16) or equivalent model of Legrand/Siemens/L&T as approved by E.I.C] [D-9, D-10/13] 3 Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand /Siemens/ Crabtree/L&T as approved by E.I.C) 4 40 Amp DP Isolator [D-5/6] 5 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make: Legrand /Siemens/ Crabtree/L&T as approved by E.I.C) 6 (a) 6-32 Amps SP MCB[D-6/7] 7 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit FR(Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] 8 a) Average run 8 mtr[6(c)/ E-16] 9 Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. 10 On Board [4 (a)(i) / E- 10 ] 11 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene / PVC rigid pipe and by the prelaid GI fish wire and making necy. connection as required. 12 3 x 22/0.3 (1.5 sqmm) [ E-9/1(b)] 13 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ E-9/1(s)] 14 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [ E-9/1(y)] 15 Supplying and fixing PVC Rigid Conduit FR [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works [E-16/7] 16 a) 20mm size [E-16/7(a)] 17 Cutting Channel of required sizeon masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipeof following diameteras per GS. 18 19 mm dia 3 mm thick[3 (a)/ E- 2 ] 19 Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 20 i) 1.5 sqmm 21 i) 2.5sqmm[F-5/9(i)] 22 ii) 4 sqmm[F-5/9(ii)] 23 iii) 6 sqmm [F-5/9(iii)] 24 Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required[23 / E-7 ] 25 Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [C-2/17] 26 Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required [C-2/14(d)] 27 Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16] 28 Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [D-14/30] 29 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[21(a) / C-3 ] 30 Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc [18(a)/E6] 31 Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop [ 24 (a) / C-3 ] 32 Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26 (a) / C-3 ] 33 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter 34 30cm (12) [28(b)/C-4] 35 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: [G-1/2] 36 a) By ISI-Medium GI pipe [G-1/2(a)] 37 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts,nuts, washers, spacing insulators etc. as required .[G-2/4(c)] 38 Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 39 a) No. 4 SWGSolid GI wire [G-2/5(a)(i)] 40 S & F of MS down rod 14 SWG MS conduit for ceiling fan complete with cutting slot, drilling, and 2x1.5 sqmm cu wire, as per GS . 41 Disconnection & dismantling existing old Electrical installation, Switch-board, wiring,Electrical fitting/fixtures etc with owns tools & takles incl. mending good damages as per GS and clearing/removing from the site. 42 Supply of Single LED tube light fitting complete with all accessories [Philips make Cat No. TMC 502 1xT-LED 22W or equivalent model of Crompton / Bajaj / Wipro as approved by E.I.C] incl. supply of 1No. 4 long 2100lm 18/20W tube (Make -Philips/Crompton / Bajaj / Wipro as approved by E.I.C)complete with all accessories. 43 Supply of Twin LED tube light fitting complete with all accessories [Philips make Cat No. TMC 502 2xT-LED 22W or equivalent model of Crompton / Bajaj / Wipro as approved by E.I.C] incl. supply of 2No. 4 long 2100lm 18/20W tube (Make -Philips/Crompton / Bajaj / Wipro as approved by E.I.C) complete with all accessories. 44 Supply of230 V 1200 mm sweep Energy savings High-speed ISI 1-star Ceiling fan complete with required down rod, canopies, rigidly connected safety tie wire, copper winding, P2 Burst-proof capacitor and complete with all remaining accessories except regulator suitable for 230 V, 50 Hz, single phase AC power supply ( Make - Usha-Striker PWD or equivalent model of Havells/CG/Orient as approved by E.I.C) 45 Supply of heavy duty Metal body Exhaust fan (Make-EPC or equivalent model of Havells/CG/Orient as approved by E.I.C)] 46 12( 300mm ) Speed 920 RPM 47 Supply of 4 long 2100lm 18/20W tube (Make -Philips/Crompton / Bajaj / Wipro as approved by E.I.C) 48 Add GST @ 18% on sl. No. 1 to 29 49 Add LWC @ 1% on sl. No. 1 to 30