Bids Are Invited For Drill Bit 2.5 Mm Length 110 85 Mm 2 Flute For Quick Coupling , Drill Bit 3.5 Mm Length 110 85 Mm 2-Flute For Quick Coupling , Countersink 3.5 , Tap For Cortex Screws 3.5 Mm Length 110 50 Mm , Tap For Cancellous Bone Screws 4.0 Mm

Sharing tender

Bids Are Invited For Drill Bit 2.5 mm length 110 85 mm 2 flute for Quick Coupling , Drill Bit 3.5 mm length 110 85 mm 2-flute for Quick Coupling , Countersink 3.5 , Tap for Cortex Screws 3.5 mm length 110 50 mm , Tap for Cancellous Bone Screws 4.0 mm length 110 85 mm , T Handle with Quick Coupling , Double Drill Guide 3.5 2.5 , Drill Sleeve Insert 3.5 2.5 length 42 mm , Screwdriver hexagonal small with Holding Sleeve , Screwdriver Shaft hexagonal small 2.5 mm , Screwdriver hexagonal small 2.5 mmwith Groove , Holding Sleeve for Nos. 314.070 314.550 and 314.570 , Depth Gauge for Screws 2.7 to 4.0 mm measuring range up to 60 mm , Sharp Hook length 155 mm , Holding Clip for Washers , Screw Forceps self-holding length 85 mm , DCP Drill Guide 3.5 for neutral and load position , Bending Iron for Plates 2.4 to 3.5 length 145 mm , Bending Pliers for Plates 2.4 to 4.0 length 230 mm , Torque Limiter, 1.5 Nm for Compact Air Drive and Power Drive , HSS Drill Bit 2.5 mm for Implant Steel sterile , Extraction Screw for Screws 3.5 mm , LCP Drill Bit 2.8 mm with Stop length 165 mm 2-flute for Quick Coupling , Screwdriver Shaft 2.5 hexagonal self-holding , Holding Sleeve for Screws for LCP 3.5 , LCP Drill Sleeve 3.5 for Drill Bits 2.8 mm , Handle with Quick Coupling , Aluminium Autoclavable Box , Wire Bending Pliers length 155 mm for Wires up to 1.25 mm , Bending Iron for Kirschner Wires for Wires 1.25 to 2.5 mm , Reduction Forceps with Points speed lock length 130 mm , Reduction Forceps with Point wide ratchet lock length 132 mm , Reduction Forceps toothed ratchet lock length 140 mm , Bone Holding Forceps self-centering speed lock length 190 mm , Bone Lever small short narrow tip width 8 mm length 160 mm , Bone Lever short narrow tip width 18 mm length 235 mm , Bone Lever with long wide tip width 24 mm length 270 mm , Chisel Handle , Chisel Blade width 10 mm , Chisel Blade width 16 mm , Chisel Blade width 25 mm , Gouge for Cancellous Bone Graft curved width 10 mm length 265 125 mm , LCP Universal Drill Guide 3.5 Stainless Steel , Wire Cutter medium with multiplication length 180 220 mmTotal Quantity : 142