|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engineer-In-Charge. |
| 3 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position complete all as specified. |
| 5 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified. |
| 6 | Demolition of Precast concrete block/ Brickwork or stone/boulder masonry, laid with cement morter complete all as directed. |
| 7 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia |
| 8 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia |
| 9 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. |
| 10 | Material and labour for Precast cement concrete block masonry with solid block type C1,1:3:6 using 20 mm graded crushed stone aggregates exc. 10 cm in width and getting in cement mortar 1:4 complete all as specified. |
| 11 | Material and labour for 25 mm thick cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregates as in floors and finished the surface even and fair complete all as specified. |
| 12 | Material and labour for 7 to 8 mm thick joint free premium quality anti skid colourceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4including dismantling of old tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco |
| 13 | Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4, including edge moulding of counters vanities etc. and machine polishing to edge to give high gloss finish. complete.complete all as specified. |
| 14 | Material and labour for 7 mm thickjoint free premium quality glazed ceramic colourtiles of size 600 mm x 300 mm as in skirting / dado and in vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3including dismantling of old tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco |
| 15 | Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 finshed even and smooth without using extra cement omplete all as specified. |
| 16 | Material and labour for applying two or more coatsof 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces.Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression) |
| 17 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified.Make:-TATA/ JINDAL/ PRAKASH |
| 18 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified.Make:-TATA/ JINDAL/ PRAKASH |
| 19 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exceeding 20 cm girth complete all as specified. |
| 20 | Supply and fix as in repairs, 15 mm bore Bib taps, chromium plated, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.Make ParrywareCat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030 |
| 21 | Supply and fix as in repairs15 mm dia stop valves cast copper alloy chromium plated fancy type, screwed down high pressure long shank and cup concealed type with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 22 | Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified.Make:-Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff |
| 23 | Supply and fix as in repairs Vitreous China wash basin, white, flat back, size 550 mm x 400 mm including 32 mm dia waste fittings and waste pipe including brackets complete all as specified.Make Johnshon / Jaquar / Cera/ Parryware |
| 24 | Supply and fix as in repairs vitreous china wash down water closet pan (pedestal pattern) with seat and cover closed pattern flat bottom, and mild steel chromium plated or aluminised hinging devicewhite colour with \"P\" or \"S\" trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as per manufacturer instructionMakeParryware/ Jaquar/ Cera/ Johnshon/ Hindware |
| 25 | Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including \"P\" or \"S\" trap and lime concrete bedding connection making good to floor all as specified. Make ParrywareCat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW |
| 26 | Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instructionMake ParrywareCat No E8109 / Cera Cat NoB1020101/ Johnshon Cat No P2831PW |
| 27 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces compleye all as specified. |
| 28 | Material and labour for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified. |
| 29 | Material and labour for providing 10 mm thick (average) rendering in cement mortar 1:3 mixed with Integral water proofing compound as per manufacture\"s instruction for levelling to a true surface and finished the surface even and smooth without using extra cement complete all as directed by Engineer-In-Charge.Note: Integral water proofing compound will be measured and paid separately. |
| 30 | Supply only Integral water proofing compound. |
| 31 | Material and labour for PCC 1:5:10, type E2 using 40 mm graded crushed stone aggregates as in filling of sunken floor and finished the surface even and fair complete all as specified. |
| 32 | Supply, lay and fix 32 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors including taking up and down complete all as specified and directed.Make:-TATA/ JINDAL STEEL/ PRAKASH |
| 33 | Material and labour for providing precast cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as in landings cover slabs (for man holes tec) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces joint as directed and setting in CM 1:4 complete all as specified. |
| 34 | Disconnecting existing tanks of Capacity exceeding 250 ltr but not exceeding 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge. |
| 35 | Disconnecting existing tanks of Capacity exceeding 500 ltr but not exceeding 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc.as directed by Engineer-In-Charge. |
| 36 | Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified including dismantling the old unserviceable one.Make:Sintex/ Astral/ Finolex/ Supreme |
| 37 | Dismantling of PVC 110 mm (SWR) drain pipe alongwith fittings and acessories and taking out from walls, floors or from trenches, if required complete all as specified and directed. |
| 38 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length withn rubber ring joints laid in trenches or in floors compelte all as specified and directed. |
| 39 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified complete all as specified and directed. |
| 40 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 41 | Supply and fix compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe-410W Grade E-250 (quality A) complete all as directed. |
| 42 | Material and labour for preparation of new and previously untreated steel or ironsurfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat ofred oxideprimer all as specified. |
| 43 | Supply and fix as in repairs 15 mm bore CP pillar tap,pressmatic with aerator complete as per manufacturer instruction.Make:- Parryware / Jaquar / Marc / Cera/ Parko |
| 44 | Material and labour for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securingwith clips complete all as specified. |
| 45 | Demolition of existing roof padding including roof treatment complete carefully by cutting, chiselling etc cleaning the surfaces by scrapping, booming brushing etc and removing the rubbish from site to a distance exc 50m and n.exc 100m all as directed by the Engineer-in-Charge and M&L for applying roof treatment as under :-(i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacture\"s instruction (to be measured and paid including this item) for levelling to a true surface and to receive new roof treatment complete.(ii) Providing coat of bitumen primer @ 0.40 Kg/Sqm complete .(iii) Providing coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm over primer surfaces alongwith aluminium paint @ 0.11 Kg/Sqm over the APP.(iv) Providing a layer of APP based polymeric membrance of approved manufacturer, 3mm thick reinforced with polyester non wooven fabrix (weighing not less than 150 gm/ Sqm) laid by torch application method, side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer\"s insructions and provided upto a height of 60cm in the parapets and inserted inside the parapets by cutting a groove and finished by membrane flashing complete all as directed.Make of APP Membrane: M/S BENGAL BITUMEN/ M/S SIKA INDIA PVT LTD/ M/S FOSROC CHEMICALS/ M/S STP LTD |
