Tender For Maintenance Of Roads At Certain Location In Sw Zone Dimapur At Rangapahar Military Station
Tender Value
62.50 Lakhs
Estimated cost
Bid Submission
16 Nov 2024
0 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rangapahar → Nagaland
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance Of Roads At Certain Location In Sw Zone Dimapur At Rangapahar Military Station
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for repairs to potholes of depth n.exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10Sqm (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10 sqm (using paving bitumen VG-30), binded with 0.09 cum of stone chippings, 6.30 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with vibratory power roller 8 to 12 tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and as directed. |
| 2 | Material and labour for premix bituminous macadam (using paving bitumen VG-30)laid / rolled and compacted to required gradient and camber (consolidated thickness 50mm or less), rolled with 8 to 12 tonnevibratory power roller complete all as specified and as directed.Note :-Binder content, paving bitumen VG-30 shall not be less than @ 4.5% by weight of total mix. All materials are prepard by hot mix plant. |
| 3 | Material and labour for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 2.5 KG per 10 Sq.m of paving bitumen ofVG-10 complete all as specified and as directed. |
| 4 | Material and labour for Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a priming / tack coat with bituminous primer at 5 KG per 10 Sq.m of paving bitumen ofVG-10 complete all as specified and as directed. |
| 5 | Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(d) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber withvibratory power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed.Note: (i) For job mix formula design purpose binder shall be as described i.e. 5.5% for VG-30 grade bitumen.(ii) No price adjustment shall be applicable if the approved quantity of binder as per design mixed is more than 5.5%. (iii) During design stage if binder content used less than 5.5% necessary price adjustment on quoted rate shall be done as per actual binder content used.(iv) Design to be got approved from GE |
| 6 | Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. |
| 7 | Supply and fixingcat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions and including taking down off old cat eye complete all as specified and as directed. |
| 8 | Supply and fixing solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. and including taking down off old solar cat eye complete all as specified and as directed. |
| 9 | Supply and fixing in Repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 10 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed. |
| 11 | Material & Labour for 100 mm thick, PCC 1:4:8, Type D-2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 12 | Material & Labour for sand filling under floors/ paths including watering and consolidation complete all as specified and as directed. |
| 13 | Material and labour for machine pressed precast conctete interlocking paver block any shape andsize with grey cement andNo pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with proper jointing complete all as specified and directed. |
| 14 | Material & Labour for providing Precast Cement Concrete Kerb Stones, Dividers with or without chamfered angles and flat, splayed, rounded or mitred topsType, B1, 1:2:4, using 20mm Graded Aggregate, including all mouldings, set in Cement Mortar 1:4 including necessary earthwork excavation complete all as specified and as directed. |
| 15 | Material and labour for preparation of new concrete surfaceof any description over 10 cm width or girthand applying two coat of synthetic enamel paint over a coat of primercomplete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Oct 19, 2024
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender