Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-12-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-12-2024 |
| 2 | 22-11-2024 | Amendments to tender documents | Other | 02-12-2024 |
| 3 | 22-11-2024 | Amendments to BoQ | BOQ | 02-12-2024 |
| 4 | 22-11-2024 | Date 03 | Date | 02-12-2024 |
| 5 | 16-11-2024 | Date 02 | Date | 27-11-2024 |
| 6 | 11-11-2024 | Date 01 | Date | 21-11-2024 |
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 2 | M&L for rendering 15mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement up to height of double storey bldg, including necessary scaffolding etc complete all as specified and as directed. |
| 3 | M&L for rendering 15mm thick in cement plaster 1:6 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement up to height of double storey bldg, including necessary scaffolding etc complete all as specified and as directed. |
| 4 | M&L for rendering 5 mm thick on ceiling surfaces of brick work or concrete wall surfaces in cement mortar 1:3 and finished even and smooth without using extra cement including preparation of new plaster surface of ceilling and applying three coat of white wash complete all as specified and as directed. |
| 5 | M&L for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over and including a coat of chalk whiting complete all as specified and directed. |
| 6 | M&L for preparation of new plaster surface on walls and applying two coats of oil bound distemper over and including a coat of chalk whiting complete all as specified and as directed. |
| 7 | M&L for preparation of old plastered surface of ceilling and applying one coat white wash complete all as specified and directed. |
| 8 | M&L applying one coat of cement base paint on wall surface including preparation of old treated surfaces of walls, cornices etc. (plastered or unplastered) by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc, up to any height ofincluding necessary scaffolding etc complete all as specified and as directed |
| 9 | M&L applying one coat of oil bound distemper on wall surface including preparation of old treated surfaces of walls, cornices etc. (plastered or unplastered) by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc, up to any height ofincluding necessary scaffolding etc complete all as specified and as directed |
| 10 | M&L complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats ofacrylic emulsion paint over and incuding 2mm thick cement base putty & a coat of primer up to any height including necessary scaffolding etc complete all as specified and as directed. |
| 11 | M&L for preparation of old wooden painted surfaces and applying one coats of synthetic enamel painton wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 12 | M&L preparation of old paintedsteel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 13 | Renewingtiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed. |
| 14 | M&L for non–skid ceramic colour tiles premium qualty 7 to 8mm thick (square /rectangular) area of each tiles exc 0.06 sqm but n exe 0.11 sqm, in floor etc, set and jointed in neat cement slurry and pointed in colouredcement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | M&L for non skid coloured ceramic tiles premium quality 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andinculding 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 16 | M&L for glazed ceramic colour tiles premium qualty in vertical surface 300x450x7mm thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 17 | M&L for non–skid ceramic colour tilespremium qualty 7 to 8mm thick (square /rectangular) area of each tiles exc 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in colouredcement to match over and including 15mm thick screed bed in CM 1:6 and including dismantiling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 18 | M&L for glazed ceramic colour tiles premium qualty in vertical surface 300X450X7mm thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM 1:4 andincluding dismantiling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 19 | M&L non skid coloured ceramic tiles premium qualty 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andinculding 15mm thick screed bed in CM 1:6 and including dismantiling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 20 | M&L non skid coloured ceramic tiles premium qualty of 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and including dismantiling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 21 | M&L for premium qualty vitrified tiles 10 mm thick (square/ rectangular) area of each tiles exc 0.42 sqm but n exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm thick cement screed bed in CM 1:6 and including old desmantiling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | M&L for premium qualty vitrified tiles 10 mm thick (square/ rectangular) area of each tiles exc 0.42 sqm but n exc 1.00 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM 1:4 and including dismantiling old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M&LPCC 1:2:4, type B–0 (using 12.50mm graded crushed stone aggregates) for levelling of floor finishes such as tiles etc complete all as specified and directed. |
| 24 | M & L for300 mm x 300 mm & 10mm thick Anti-Skid pavement tile Endura vetrified tile in approved color & Shade and in anti skid finishset and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:4 and including old dismantiling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 25 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block with grey cement and no pigments of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including 100mm thick PCC 1:4:8 Type D-2,(using 40mm graded crushed stone aggregate) as in sub base and demolition of old cement concrete complete all as specified and directed |
| 26 | M&L for providing, cement concrete Type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates water troughs and the like including weathering, slightly rounded or chamfered angles and throating rounded or chamfered on edges, all as specified and as directed. |
| 27 | M&L for granite tiles 16–18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including 15mm thick screed bed in CM 1:6 including old dismantiling of floor and hearth tiles complete all as specified and directed. |
| 28 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 29 | M&L 20–25mm thick machine cut kota stone slab as in floor over and including 20mm thick screed bed in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing mirror polish including old dismantiling of floor and hearth tiles complete all as specified and directed. |
| 30 | M&L 20–25mm thick machine cut kota stone slab over as in skirting, riser of steps, dado & pillar etc. over and including 10mm thick screed layer in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing including of old dismantiling of tiles complete all as specified and directed. |
| 31 | M&L for providing 75 mm thick cement concrete 1:3:6, type C–1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including demolition of old cement concrete complete all as specified. |
| 32 | Dismantling boarding/ ceiling/ wall panelling any discription, fixed in position incluidng frame work complete all as specified & directed by the Engr–in–Charge. |
| 33 | S&F 5mm thick one side prelaminated and other side plain white colour solid PVC plyin wall panelling inclusive of solvent cement and fixing at site with screw as per specifications and drawing as specified in MES SSR Part II 2020 complete all as specified and as directed. |
| 34 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing in MES SSR Part II 2020 complete all as specified and as directed. |
| 35 | Dismantling wooden scantling framed work of any description not otherwise provided for complete all as specified and as directed by the Engineer–in–Charge. |
| 36 | M&L rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow tube or flat sections) including distance pieces, cleats etc. conforming to Fe–410–W (Gde–E–250) quality \"A\"complete all as specified and as directed. |
| 37 | Dismantling of plain or corrugated asbestos cement sheet of any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer–in–Charge. |
| 38 | S&F Pre–painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpaas in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 39 | S&F Pre–painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150grams/Sqm (Az–150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 40 | Dismantiling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by the Engineer-in-charge |
| 41 | Demolition of mudin roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the engineer-in-charge |
| 42 | M & L for providing cementconcrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops,padding,rounded or chamfered on edges including form work where ever required. |
| 43 | M & L rendering 10 mm thick on existing concrete surface of roof in cement mortar 1:4 including mixing water proofing compound @ 3% by weight of cement or as per manufacturer\"s instruction and finished fair and even without using extra cement complete all as specified and as directed. (Note:- WPC shall be measured & paid separately) |
| 44 | Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-charge. |
| 45 | M & L for providing and laying at any height 3mm thickAPP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg/Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminious primer @ 0.40 ltr / Sqm by the same membrane manufactures roof membrane over existing RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg/ ltr at 25 degree centigrade on prepared surface.(c) Apply on APP membrane a coat of hot blown bitumen grade 85/25 conforming to IS 702 @ 1.20 Kg per Sqm(d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap.(e) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.. |
| 46 | M & L for plain cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurryon roof top complete all as specified and as directed. |
| 47 | M & L applying a coat of solar reflective aluminium paint @ 0.11 kg per sqm on APP membrane surfaces complete all as specified and as directed. |
| 48 | M&L for PCC 1:5:10 type E–2 using 40mm graded crushed stone aggrgate as in filling in sunken portion floor, rounded or chamfered on edges including demolition of old PCC and removing from site complete all as specified and directed. |
| 49 | M&L for sunken floor water proofing treatment as per following work details, complete all as specified and directed :–(A) Scrapping the surface with wire brush and cleaning with water and allow to dry.(B) Applying cement slurry @ 3 kg/sqm duly mixed with water proofing compound.(C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(D) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.5 kg/sqm.(E) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(F) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.50 kg/sqm.(G) Curing the sunken portion with water min 48 hours by ponding. |
| 50 | S & F of 40 mm bore GI pipe medium grade as in spout pipe complete all as specified and directed. |
| 51 | Supply only water proofing compound complete all as specified. |
| 52 | Taking down chowkats or frames with shutter, areanot exceeding 1.50 Square metre(w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs andadjoining surfacesin CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 53 | Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre andnot exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. |
| 54 | Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each with iron mongeries complete all as specified and directed. |
| 55 | Taking down and refixing in same opening of shutters of any description exc 1 sqm but n exc 2sqm each with iron mongeries complete all as specified and directed. |
| 56 | S&F for mild steel of angle /tee /beam /hollow MS section for channel gate/door /window frames /chowkhat, window guard bars etc., and similar articles conforming to Fe–410–0 or Fe–310–0 including necassary cutting, drilling and welding complete all as specified and directed. |
| 57 | M&L for factory made 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 58 | S&F for 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc, without sash bars edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securinggauge, etc sizes of member of shutter as specified in SSR part–I sec 8 clause 8.24 (a) complete all as specified and as directed. |
| 59 | M&L for preparation of new or previously untreated surfaces of wooden and applying two coats of synthetic enamel paint over and incuding a coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 60 | Supply and fixing of pressed steel frames for doors of size 125x60mm, 1.25mm thick, with one or more rebates including, hold fasts of 25mm x 4mm MS FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, lock strike plate, including sanding, tarring backs of chowkhats, 2 Nos 12 mm dia tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. Note:- Rates quoted are inclusive of holdfast, lugs, tie bars and one coat of red oxide primer. |
| 61 | All as per item No 60 here-in-before but for windows. |
| 62 | Supply and fixing of steel window box type, using ERW hollow \"P\" section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurementand payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings. The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measuredand paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours. |
| 63 | Supply & fixing Mild Steel framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 64 | M&L preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over and incuding a coat of red oxide primer complete all as specified and as directed. |
| 65 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hanging) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket requiredwith extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screwsall complete as per architectural drawings complete all as specified and directed. |
| 66 | S&F for anodised aluminium grill of approved design /pattern with approved standard section and fixed to existing window frame with CP brass /stainless steel screws 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 67 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed |
| 68 | S&F 3mm thick sheet glass ordinary quality with aluminium beading, rubber packing or oil putty in square n exc 0.5sqm in each pane complete all as specified and directed. |
| 69 | S&F 3mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane complete all as specified and directed. |
| 70 | S&F 4.8 mm thick tinted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square complete all as specified and directed. |
| 71 | S & F at any height rough cast wired glass 6.4 mm thcik and glazing with oil puttyin sqm exceeding 0.5 sqm and not exceeding 1.00 sqm including sealing all corners with silicol gel complete all as specified and as directed. |
| 72 | M&L for 12 mm thick prelaminated particle board, interior grade, both sides with white lamination as in door, fixed with screws to aluminium frame complete all as specified and directed. |
| 73 | S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 74 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or ms nut & bolt including removing from old steel window /doorcutter /grinder or any other method complete all as specified and directed. |
| 75 | S& F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 76 | S&F for factory made solid PVC moulded door shutters (wood free EPS) 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including 03 nos 100 mm long stainless steel hinges, 02 nos 150 mm aluminium handle & 02 nos 150 mm long aluminium tower bolt in each shutter complete all as specified and directed. |
| 77 | Dismantiling of old wooden/pvc boarding/shelves of Kitchen cabinets and cupboards any description, fixed in any position with nails complete all as specified and as directed. |
| 78 | M&L18 mm thick prelaminatedparticle board prelaminate both sides with decorative choice laminations exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cabinet and cupboard shutterincluding 3mm thick 2nd class hardwood leeping patti on cut edge of boardscomplete all as specified and as directed. |
| 79 | M&L12 mm thick prelaminated particle board prelaminate both sides with decorative choice laminationsexterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cabinet and cupboard shelves including 3mm thick 2nd class hardwood leeping patti on cut edge of boardscomplete all as specified and as directed. |
| 80 | S&F 5mm thick plaincolour PVC sheetfixed with screws, solvent cement / adhesives as in cladding ofcupboard inner side including 2mm thick edge bonding tape or pvc angle fillets onedgescomplete all as specified and as directed. |
| 81 | M&L for PCC 1:3:6, type C–0 (12.50mm graded crushed stone aggregate) as in bed blocks for hold fast & filling of pressed steel frame including necesssary formwork complete all as specified and directed. |
| 82 | S&F for 100mm MS Butt hinge medium weight cold rolled complete all as specified and directed. |
| 83 | S&F in repair for 100mm MS Butt hinge medium weight cold rolled complete all as specified and directed. |
| 84 | S&F for 150mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 85 | S&F in repair for 150mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 86 | S&F for 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 87 | S&F in repair for 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 88 | S&F 300 mm long aluminium sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed. |
| 89 | S&F in repair 300 mm long aluminium sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed. |
| 90 | S & F 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 91 | S & F in repair 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 92 | S&F for 2 lever brass locks foralmn doors,cupboards vertical type, size 65 mm complete all as specified and directed. |
| 93 | S&F in repair for 2 lever brass locks foralmn doors,cupboards vertical type, size 65 mm complete all as specified and directed. |
| 94 | S&Ffloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floo 150mm long cover plate complete all as specified and directed. |
| 95 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floo 150mm long cover platecomplete all as specified and directed. |
| 96 | S&Fmild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate including fixing to steel frame complete all as specified and directed. |
| 97 | S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate including fixing to steel frame complete all as specified and directed. |
| 98 | S&F aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 99 | S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 100 | S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 101 | S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 102 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete fixed as in repair complete all as specified and directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 103 | S & F in repair first class soft woodBeading, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads to storecomplete all as specified and directed. |
| 104 | S & F in repair wooden Pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, joinery, etc. including painting or oiling to match, if required complete all as specified and directed. |
| 105 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 106 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 107 | Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills ,sunsheds, shelves, lintel etc and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth complete all as specified and directed. |
| 108 | S&F for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 109 | S&F for GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 110 | S&F in repair for 500 litres rotational moulded polyethylene HDPE water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, connecting up pipes, securing access covers etc., and including 20mm bore tank nipple & one 20mm GI union at outlet and including 20mm ball valve with float and flynut screwed to pipe including dismantling of water tanks and removing to store all as specified in SSR Part–I complete all as specified and directed. |
| 111 | S&F in repair for 20mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 112 | S&F in repair for 15mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 113 | S&F in repair 15mm bore long body bib taps cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 114 | S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed shank and fly nuts complete all as specified and directed. |
| 115 | S&F in repair brass CP wall / sink mixer for mixing hot & cold water for 15mm bore dia, pipes, screweddown for iron pipe with connected leg with wall flange & wall bracket for hand shower and fixed complete all as specified and directed. |
| 116 | S&F in repair brass CP wash basin mixer for mixing hot & cold water for 15mm bore dia, pipes, screweddown for iron pipe with connected leg with wall flange fixed complete all as specified and directed. |
| 117 | S&F in repair stop valves /angle valve chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 118 | S&F in repair consealed stop cock chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 119 | S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed. |
| 120 | S&F in repairStainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 121 | S&F in repairStainless steel sink with out draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 995mmx420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 122 | S&F in repair vitreous china wash basin white, flat back, size 550x400 mm including cutting for pinning in ends of brackets or erecting stand,including chromium plated long screwed shank and fly nuts etc including 32mm brass waste coupling and PVC waste pipecomplete all as specified and directed. |
| 123 | Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including provision of lime concrete bedding for fixing and making good to existing floor surface to match with the existing surface and connection to flush pipe, trap, anti syphonage pipe, etc including taking down and removal of existing unserviceable squatting pan of any description and size complete all as specified and directed. |
| 124 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white, incl \"P\" or \"S\" trap, connection to drain and flush pipe, antisyphonage pipe and seat cover closed pattern flat bottom, mild steel chromium plated or aluminised hinging device complete and as specified. |
| 125 | Supply and fixing as in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, CP coupling ,PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,complete all as specified and as directed. |
| 126 | S&F as in repair heatlh faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.20 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 127 | Supply and fixing in repairs of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, 45cm PVC connection with PVC bend/flush pipe complete and making all connectionsincluding taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed. |
| 128 | S&F in repair 32mm dia flush pipe fixed with WC complete all as specified and directed. |
| 129 | S&F in repair pvc grating 100mm dia with or without waste hole complete all as specified and directed. |
| 130 | S&F in repair pvc water closet seat cover, white, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 131 | S&F in repair50 mm dia stainless steel waste couplingfor kitchin sink etc of standard length complete all as specified and as directed. |
| 132 | S&F in repair 32 mm dia PTMT waste coupling for wash basin etc of standard length complete all as specified and as directed. |
| 133 | S&F in repair 15mm bore shower rose chromium plated 125mm dia alongwith 15mm bore shower arm 195 mm long with bend of 45 degree complete all as specified and directed. |
| 134 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as in repair complete all as specified and as directed. |
| 135 | S&F in repair brass chromium plated soap dish holder and fixed with brass screws to wall complete all as specified and directed. |
| 136 | S&F as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 137 | S&F in repair stainless steel towel ring round between flanges including fixing with brass screws complete all as specified. |
| 138 | S&F for 100mm aluminium Butt hinge medium weight cold rolled complete all as specified and directed. |
| 139 | Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 250 mtr and n exc 500 mtr complete all as specified and as directed. |
| 140 | M&L for brickwork with sub–class \"B\" bricks, straight or curved on plan to any radius brick thick walls /manhole or foul position built in CM 1:6 complete all as specified and as directed. |
| 141 | M&L brick work with sub class \"B\" old size bricks (except bricks and using old servicable bricks) including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 142 | M&L for factory made precast RCC manhole covers with frame, 1:2:4, type B-1 using 20 mm graded stone aggregates), of different sizeswith plain faces, including 3mm thick mild steel flat sheetall around , mild steel handle 02 nos and incl reinforcement, set in cement mortar 1:4 including demolition of existing manhole cover complete all as specified and as directed. |
| 143 | M&L for providing reinforced cement concrete type B–1, 1:2:4 (20mm graded crushed stone aggregate) in roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete with joints to match including demolition and necessary formwork complete all as specified and directed. |
| 144 | S&F mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0,.9mm dia or screwing with clip etc complete all as specified and directed. |
| 145 | Taking down ofPVC /cast iron/RCC drain pipes /rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 146 | S&F110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed in wallincluding all fittings (bend,branch piece,tee & coupler etc ) complete all as specified and directed. |
| 147 | S&F110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid trenches, floor including all fittings (bend,branch piece,tee & coupler etc) complete all as specified and directed. |
| 148 | S&F in repair 110 mm bore PVC cowl 110mm bore complete all as specified and directed. |
| 149 | S&F 75mm bore PVC (SWR) pipes single socketed incl all necessary fitting bend, tee, single Y etc. in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 150 | S&F 75mm bore PVC (SWR) pipes single socketed incl all necessary fitting bend, tee, single Y etc. in any length with rubber ring joints, laid in floor /trenchescomplete all as specified and as directed. |
| 151 | S&F in repair 75 mm PVC(SWR) floor trap with grating incl jointing to waste pipe incl fixed in cement concrete type B–1 (1:2:4) complete all as specified and as directed. |
| 152 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solventcement all as specified and directed. |
| 153 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 154 | Returning, filling in, including spreading, levlling ,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 155 | Removing surplus excavated materialto a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 156 | S & F Reinforced concrete pipes, class NP2, 150 mm dia bore laid and jointed complete with collars complete all as specified and as directed. |
| 157 | M&LPCC 1:4:8, type D–2 (using 40mm graded crushed stone aggregates) as in foundation filling & mass concrete etc complete all as specified and directed. |
| 158 | Cleaning and removing all scale and dirt, etc,from mouths of circulating pipes, etc., from 500 ltr capacity PVC tanks andcomplete all as specified and as directed. |
| 159 | Disconnecting existing tanks capasity 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 160 | Metal Welding in repairs n. exc 2.5cm in length n exc 6mm thick complete all as specified and as directed. |
| 161 | M&L100 mm thick cement concrete 1:2:4, type B–2 (using 40mm graded crushed stone aggregates) laid in panels 1.2 x 2.5 M alternate bay as flooring etc including 3mm thick and 22 mm width of strip glass dividing strip inserting in position and demolition of old cement concrete complete all as specified and directed. |
| 162 | Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and as directed.(Note : Any other items except mentioned in this item, if required, the same shall be measured and paid for separately under respective items) |
| 163 | Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patchesn exc 1 sqmetc, including petty repairs material like sand, cement & aggregate to make it functional & match with existing surfacees if required complete all as specified and as directed.(Note : Any other items except mentioned in this item or major repair , if required, the same shall be measured and paid for separately under respective items) |
| 164 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work andcarryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails, check nuts to make water supply/ plumbing lines functional and leak proof complete all as specified and as directed.(Note : Any other items except mentioned in this item, if required, the same shall be measured and paid for separately under respective items) |
| 165 | Cleaning of sludge from the manholes by taking out loose sediment sand, girt, ash, sludge water, rags, fibres or vegetationincluding removal of sludge/debris to a distance exceeding 250m but n exceeding 500m and buried under groundcomplete all as specified and as directed. |
| 166 | Cleaning of sewage line upto first man holes by any means and removing blockage of WC, EWC, Bathroom, floor trap of WHB/Kitchen pipe etccomplete all as specified and as directed.Note for Item No.162 to 166 :-(i) Contractor or his authorised rep will report daily at 0900 hrs and onwards at complaint cell for collection of complaints from the concerned JEIn chargeand distribute all complaints/ detailing to his trademen, monitoring the work done and taking the complaint slip back from trademen on every working day, re-submit the same to JE in charge after rectifying the complaint at complaint cell. In case contractor or his rep failed to attend & rectify the complaint then a recovery of Rs 1000/- per day shall immediately be effected from the contractor\"s dues in terms of conditions 25, 44 & 45 of IAFW-2249 (General Conditions of contracts).(ii)The complaint of BOQ item No. 162 to 164 shall be attendedand rectified within 08 hrs i.e from 0900 hrs to 1700 hrs (excluding sunday & gazetted holiday), commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.1000/- per complaintshall be levied upon/imposed on the contractor and necessary recovery shall be effected from his dues on this account. In case, after checking & attending the complaint, if it is not possible to rectify the complaint within 08 hrs, the fact shall be brought to the notice of Engr-in-Charge by the contractor/ his rep immediately and if Engineer-in-Charge is satisfied with the facts brought by the contractor, no recovery shall be made on this account. |
| 167 | (iii) The complaint of BOQ item No. 165 & 166 shall be attended & blockage shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs (excluding sunday & gazetted holiday), commencing from date and time of notifying the complaint slip failing which a penalty @ Rs.1000/- per complaint shall be levied upon/imposed on the contractor and necessary recovery shall be effected from his dues on this account. In case, after checking & attending the blockage, if it is not possible to rectify the blockage within 08 hrs, the fact shall be brought to the notice of Engr-in-Charge by the contractor/ his rep immediately and if Engineer-in-Charge is satisfied with the facts brought by the contractor, no recovery shall be made on this account. (iv) All T&P required for attending the complaints shall be provided by the contractor without any extra cost. (v)The above all aspect shall be deemed to be included in the quoted rate of the respective item |
| 168 | S&F 5mm PVC hollow sheet (the thicknees of inner wall 0.7 to 1.00mm) in wall panelling inclusive of solvent cement and fixing at site with U clip and PVC frame/fillet as per specifications and drawing specified in MES SSR Part II complete all as specified and as directed. |
| 169 | Supply and fixing GI Metal powder coated lay in or linear ceiling system at all heights of perforated with fleece 600x600x0.5mm tegular edge tiles in global colour powder coated with 60–70 micron front coating laid on 24mm wide Tee grid – strong section flanges colour white having stitching on the Main Runner, 600 mm and 600 mm Cross Tees with web height of 26mm. The tiles should have Humidity Resistance (RH) of 100%, with Light Reflection of 62%. The main runner spaced at 600 mm max (centre to centre) securely fixed to the structural soffit. Hangers (GI wire of 4 mm dia) to be fixed by approved roof plug, level adjusters and screws etc at 600x600 intervals. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 600mm long cross tees to be interlocked between main runners to form 600 x 600 mm with grid module (24X38X0.3mm). Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 600 mm cross tees. Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), including PVC clips to hold the ceiling tile complete, all as specified and as directed. |
| 170 | Removing old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss small tress etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and as directed. |
| 171 | S&F as in repair PVC tank lid/cover suitable for capacity 500 /1000 ltrs with and including locking arrangments such as nuts, bolts etc complete all as specified and as directed. |
| 172 | S&F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 24\"x30\"x10\" including screws and fixing arrangements complete all as specified and directed. |
| 173 | S&F in repair 32 mm dia PVC waste pipe for wash hand basin /kitchen sink etc of standard length complete all as specified and as complete all as specified and as directed. |
| 174 | S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket and railing 60 cm long complete all as specified and as directed. |
| 175 | S&F in repair glass corner shelf 5.50mm thick including CP railing radius 250mm complete all as specified and as directed. |
| 176 | M & L chipping off spilled and loose concrete, de-rusting of steel reinforcement by sand blasting and applying one layers of guniting by machine n. exc. 25 mm thick in cement mortar 1:2 using ordinary portland cement over and including steel mess 25mmx25mm with 3mm dia steel wire as reinforcement/XPM of weight not less than 4.00 Kg/sqm for strengthening measures as on RCC beams/slabs/lintels/facias/drops and similar works etc. including shuttering, padding necessary chases where required complete all as specified and as directed. Note : (i) Placing the additional reinforcement all concrete surface shall be thoroughly scrubbed with brushes, washed with water and allowed to dry. (ii) Work has to be carried out in patches area shall n.exc 1.00 sqm in each patch. |
| 177 | Taking down rolling shuttergear operated type with bevel gear box and crank handle incl taking down accessories like shaft, top cover, guide channel and straightening/ rectify warped/buckled parts, replacing unserviceable components/parts with new with and including cleaning/overhauling, greasing/oiling, make functional rolling shutter in all respect and refixing the same in same opening to walls/RCC members complete all as specified and as directed. (All new components/accessories will be measured and paid separately as supply only under relevant item of schedule) |
| 178 | Supply only suspension shaft of dia 50 mm mild steel pipe incl springs ( for exc 3 Mtrbut not exc 6 Mtr wide shutter) complete all as specified and as directed. |
| 179 | Supply only mild steel guide channel of width 75 mm deep & 25 mm wide andmade from 3.15mm thick PBI sheet complete all as specified and as directed. |
| 180 | Supply only ball bearing for 40 to 50mm dia shaft of rolling shutter upto 6.0m widthcomplete all as specified and as directed. |
| 181 | Supply only tension spring with new tension spring of size 600mm for shutter exceeding 12 Sqm each complete all as specified and as directed. |
| 182 | Supply onlymild steelwheel gear box with new wheel gear box of suitable for large size shutters having area more then 8 sqm including handle as per existing sizecomplete all as specified and as directed. |
| 183 | Note:-Amount of credit ofRs. 71375.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 17 & 18 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
