Estimate For The Cost Of Maintenance Work Of Information Center At Kumilyin Thekkady Range During 2024-2025.
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
28 Oct 2024
0 days left
EMD
11900
Bank guarantee accepted
Document Fee
1121
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thekkady → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
ESTIMATE FOR THE COST OF MAINTENANCE WORK OF INFORMATION CENTER AT KUMILYIN THEKKADY RANGE DURING 2024-2025.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Oct-2024 | date extension of works | Date | 28-Oct-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | 50.6.2.1Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1cement :6 coarse sand) etc complete |
| 2 | 15.9.2Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceablematerial and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charges:In cement mortar |
| 3 | od21912/2024_2025Engaging Coolie for |
| 4 | 13.3.120 mm cement plaster of mix:1:4 (1 cement : 4 fine sand) |
| 5 | 50.9.1.1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 6 | 50.9.3.1Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size withnecessary screws, excluding paneling which will be paid for separately, all complete as per direction 0fEngineer in- charge. using Anjili/ Jack wood |
| 7 | 11.41.2Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 8 | 14.5.1Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Floatglass panes of thickness 4 mm |
| 9 | 50.9.11.2Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame,backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as perthe direction of site Engineer-in-charge |
| 10 | 50.12.4.1Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality inaluminium frame work with necessary screws etc complete (aluminium frame work shall be paidseparately) |
| 11 | 10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 12 | 13.83.2Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile includingapplying additional coats wherever required to achieve even shade and colour.Two coats |
| 13 | 13.99.1Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give aneven shade :One or more coats on old work |
| 14 | 12.51.1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) totalcoated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinccoating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on bothside of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screwscomplete:Ridges plain (500-600 mm) |
| 15 | 12.51.6Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) totalcoated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinccoating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on bothside of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screwscomplete:Gutter (600 mm over all girth) |
| 16 | 17.6.4Providing and fixing one piece construction white vitreous china squatting plate with an integrallongitudinal flushing pipe, white PVC. automatic flushing cistern, with fittings, standard size, G.I./PVCflush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brasscoupling complete, including painting of fittings and cutting and making good the walls and floors etc.wherever required:Range of four squatting plates with 10 litre PVC automatic flushing cistern |
| 17 | 17.7.1Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps |
| 18 | 17.28.1.2Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semirigid pipe40 mm dia |
| 19 | 17.32.2Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangularshape 453x357 mm |
| 20 | 17.73.2Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour600 mm long towel rail with total lengthof 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms |
| 21 | 18.19.3.1Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominalboreHorizontal |
| 22 | 18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 23 | 18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms.15 mm nominal bore |
| 24 | 18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved qualityconforming to IS: 893115 mm nominal bore |
| 25 | 18.65Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mmwith concealed fittings arrangements, weighing not less than 106 gms |
| 26 | 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundationtrenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides andramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplusexcavated soil as directed, within a lead of 50 m.All kinds of soil |
| 27 | 5.9.2Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) includingattached pilasters, butteresses, plinth and string courses etc. |
| 28 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 29 | 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 30 | 50.18.7.3.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete asper direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall |
| 31 | 50.18.7.5.1Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. Thisincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete asper direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall |
| 32 | 2 Other necessary items |
| 33 | Lumpsum for round off |
AI Tender Summary
Tender Timeline
Oct 28, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 28, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 28, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 30, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender