|
| 1 | Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets in roof covering complete all as specified and directed. |
| 2 | S & F prepainted colouredgalvaniume aluminium zinc coatingGI basedcorrugated steel sheet 0.50 mm thickof ancolourhaving tensilestregnth of 550 mpaas in roofcovering andgladdingto wall fixed with self tapping screwscomplete all as specified and directed. |
| 3 | S & F prepainted colouredgalvaniume aluminium zinc coatingGI basedPlain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roofcovering /cladding to roof wall, fixed with self tapping screws as specified |
| 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 5 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 6 | M&L for synthetic enamel painting two coats on New Steel surfaces over a coat of red oxide primerincluding preparation of surfaces of any description over 10cm girth or width not other wise described complete all as specified and directed. |
| 7 | M&L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying one coat synthetic enamel paint complete all as specified and directed. |
| 8 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thicknesscomplete all as specified and directed. |
| 9 | S & F in repair ceiling using\"E\" board of size 605 mm x 605 mm x 4 mm thick, white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanised steel sheet and of size 24mmx32mmx300 mm board spaced at 1200 mm maximum centre to centre.Hangers of GI wire 4mm dia to be fixed by approved rawal plug level and fasteners and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 1200mm longercross tee (with double stitching) to be interlocked between main runners at 600mm centre to centre from 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm doubles to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee.(with double stitching) to be interlocked between main runners at 600mm centre to centre from 1200x600mm modules cross tee longer than 600mm to be supported independently. Tee perimeter wall angle shall be 0.45mm thick GS sheet of size 19 mmx19 mm and 300mm long of white colour all as per manufacture\"s instructions compete all as specified & directed. |
| 10 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 11 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed. |
| 12 | S & F Pressed steel frames factory made for doors made of 1.25 mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125 x 60mm including tarring ends and back chowkats and lugs including filling of hollow of frame with PCC 1:3:6& PCC 1:2:4 for block for hold fastincluding two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 13 | S & F Pressed steel frames factory made for doors out of 1.25 mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 105 x 60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fastincluding two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 14 | S & F 35 mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhatcomplete all as specified and directed. |
| 15 | S & F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 16 | S & F35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 17 | Material & Labour preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 18 | S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 19 | S & F factory Made Solid PVC Moulded Door Shutter28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, as per specification & sketch shown in section 8 of SSR part II complete all as specified and directed. |
| 20 | S & F Aluminium anodised handle extruded section of size 150mm complete all as specified and directed. |
| 21 | S & F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 22 | S & F Aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts ofsections or cast-aluminium extruded alloy and fixed complete all as specified and directed. |
| 23 | S & F Aluminium anodised barrel tower bolts extruded section of size 150 mm, all as complete all as specified and directed. |
| 24 | S & F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 25 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed |
| 26 | Supply and fixing factory made UPVC white colour Sliding window Three track area not exceeding 2.0 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) complete all as specified and directed. |
| 27 | M & L forAnodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 28 | M & L for mild steelframed work such as in grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 29 | Supply & Fix 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 30 | S & F in repair25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets, cap both endsfixed to wall complete all as specified and directed. |
| 31 | S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified. |
| 32 | Material and Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over25 mm thick PCC 1:2:4 type B0 including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 33 | Material & Labour vitrified tiles 10 mm thick ,area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm, in floor etc set and jointed in neat cement slurry including 15 mm screed bed CM 1:4 over25 mm thick PCC 1:2:4 type B0including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 34 | M & L for 100 mm thick plain cement concrete1:4:8, type D2 (using 40 mm graded crushed stone aggregate) for in open areabenching etc, finished even and rough to receive the toping layercomplete all as specified and directed. |
| 35 | M&L for 1st quality non skid coloured ceramic Heavy duty outdoor parking tiles area n exc 0.11 Sqm each tiles10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 36 | Material & Labour Glazed ceramic tiles in vertical surface size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding incl 10mm thick plaster in cm 1:4 including dismantling of exsitingtiling/pcc floor/ wall any type and removing dubries outside of Md/OTM accn complete all as specified and directed. |
| 37 | S&F in repairshigh density polythene pipe 32 mm (HDPE) of pressure @ 6 Kgf/Sqcm laid in trenches / wall complete all as specified and directed |
| 38 | S & F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 39 | M & L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed. |
| 40 | M & L Cement concrete 1:4:8 type D-2 using 40mm graded agg and 75mm thick as in sub base of floors complete all as specified and directed. |
| 41 | Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed. |
| 42 | M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings, kerbs including necessary formwork etc complete all as specified and directed. |
| 43 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 44 | M & L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cementsand mortar 1:6.complete all as specified and directd. |
| 45 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 46 | M & L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair complete all as specified and directed. |
| 47 | M & Lfor rendering 10 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and as directed. |
| 48 | M & L for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed.Note: water proofing compound shall be measured & paid seprately. |
| 49 | Supply only liquid water proofing compound complete all as specified and directed. |
| 50 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 51 | M & L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 1 mm thick preparatory to distemperingcomplete all as specified and directed. |
| 52 | M & L forpreparation of newly external plastered surfaces of wall and applying two coats of weather proof paint of APEX of Asian paints or its equivalent over a coat of white primer includingapplying 2mm to 3mm thick wall care putty complete all as specified and directed. |
| 53 | M & L for complete removal of existing treatment on walls with mechanical means, washing, rubbing down and stopping of plastered surfaces of wall and applying two coats of weather proof paintover a coat of white primer includingapplying 2mmthick wall care putty complete all as specified and directed. |
| 54 | M&L for preparation of old woodensurfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synnthetic enamel paint of approved colour / shade complete all as specified and directed. |
| 55 | M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care puttyincluding complete removal of existing treatment complete all as specified and directed. |
| 56 | M&L for 75 mm thick plain cement concrete1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, finished even and smooth wihtoutusing extra cement,complete all as specified and directed. |
| 57 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed. |
| 58 | S & F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed. |
| 59 | Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed. |
| 60 | M & L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed. |
| 61 | Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and including dismantling of old tank complete all as specified and directed. |
| 62 | S & F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 63 | S&F in repair 15 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 64 | S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed. |
| 65 | S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete andand 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and as directed. |
| 66 | Supply & Fixed in repairs vitreous china pedestalpattern (P Trap) type white wash down water closet pan with Antimicrobial Solid Seat Cover Code No.: C8094 but excluding flushing cistern and flush pipe complete all as specified and directed. |
| 67 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed. |
| 68 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 69 | Supply and Fixin repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified and as directed. |
| 70 | Supply and fix in repairsoap dish ,matt finished chromium platedSoap Dish Holder complete all as specified and directed. |
| 71 | Supply and fixin repair toilet paper holder with flap recessed type chromium plated complete all as specified and directed. |
| 72 | S&F in repair Single Lever Basin Mixer with 450 mm long braided hoses complete all as specified and directed. |
| 73 | S & F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed. |
| 74 | S&F in repair 15 mm size bib tapscast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. |
| 75 | S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. |
| 76 | S&F in repairpillar tap cast copper alloywith capstin heads chromimium platedfancy type screweddown high pressure with or without lettered hot or coldwith long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. |
| 77 | S&F in repair Brass chromium plated shower rose125 mm size and fixed complete all as specified and directed. |
| 78 | S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 79 | S&F in repairlooking mirror of size 600 x 450 mm, selected quality5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete all as specified and directed. |
| 80 | S & F in repair 250 mm size mild steel peg stay fixed to steel window (as per sample) complete all as specified and directed. |
| 81 | S & F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 82 | S & F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specifiedand directed. |
| 83 | S & F in repair 75 mm dia PVC (SWR)pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified and directed. |
| 84 | S & F in erpair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding all type earth work complete all as specified. |
| 85 | Taking down carefully aluminum/copper point wiring (light fan socket or power) completeand making good disturbed surfaces of walls, floor to match with existing specification keeping aside serviceable items for reuse within the same bldg and removing U/S items from site complete all as specified and directed. |
| 86 | M&Lfor point wiring in concealedPVC conduit complete including necessary chasing, cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd size (factory made) with top cover 3 mm thick of plastic laminated sheets of required colour painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories andincluding PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match withexisting surface complete all as specified for the following: |
| 87 | One light/fan/exhaust fan point controlled by one switch |
| 88 | One5 amp socket outlet point on same board |
| 89 | One 5 ampsocket outlet point on an independent board |
| 90 | One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core includingPVC insulated2.5 sq mm stranded copper conductor green colour as earth wire complete all as specified and directed. |
| 91 | S&F switch piano, single pole one way 5 Amps 240 Volt complete all as specified and directed. |
| 92 | M & L for switch piano flush button single pole one way 15 amps 240 volt complete all as specified and directed. |
| 93 | M & L for socket 5 amps 5 pin flush type , 230 volts complete all as specified and directed. |
| 94 | M & L for socket 15 amps 6 pin flush type , 230 volts complete all as specified and directed. |
| 95 | M&L ceiling rose three terminals/PVC/polycarbonate,isolated body on PVC board complete all as specified and directed. |
| 96 | S&F for LED tubelight fitting 1 x 20 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. |
| 97 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 98 | S & F inlamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent holder fittings including LED Bulb 9/10W complete all as specified and directed |
| 99 | Supply and fixing fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed. |
| 100 | S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one SPMCB 20 A complete all as specified and directed. |
| 101 | Supply & fix in sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .(Note - MCBs will be measured separately.) |
| 102 | S & F in replacement MCBsingle pole 240 voltfrom 6 to 32 amps , with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed. |
| 103 | S & FMCBsingle pole 240 voltfrom 6 to 32 amps , with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed. |
| 104 | S & F MCB SPN 240 volt from 6 to 32 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. |
| 105 | S & F Sheet metalenclosurefor Vertical TPN DB 4Way 415 Vwith 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands and With provision for 3 pole and 4 Pole MCCB as incomer and SP/TP complete all as specified and directed. |
| 106 | Supply and fixingin in replacementMCCB TPN 100 Amp, 415 volts 10 KA Thermal Release Range complete all as specified and directed. |
| 107 | Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. Note:- The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt. Quoted rates shall deemed to be included for taking down and transportation of the fans and the fans will be disposed off as per policy in vogue. |
| 108 | Supply and fixing ceiling fans complete with blades, down rods and other accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 109 | Supply and fix electric water heater, storage type steel body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 110 | S & F inLT UG PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size cross-sectional area3 1/2 core x95 sq mm , fixed on walls / ceilings / trusses of complete incl taking down the old unserviceable cables complete all as specified and directed. |
| 111 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm for laying of cable and foundation of poles stays and getting out in any type of soil complete all as specified and directed. |
| 112 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed. |
| 113 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 114 | M & L for sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed. Note: Punned thickness of sand shall be measured. |
| 115 | Supply and laying brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat,size 230mm x 115mmx 75mm, complete all as specified and directed. |
| 116 | M&L for Galvanized steel water tubing medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors,back-nuts, caps, plugs, diminishing pieces and sockets etc as per site requirementof 40 mm dia GI pipe line complete all as specified and directed. |
| 117 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. fixing on wall/pole with GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and grouting on wall with necessaryMS nuts, boltsand washers complete all as specified and directed. |
| 118 | Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep belownormal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on complete all as specified and directed. |
| 119 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of suitable hole for exhaust fan and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 120 | Supply, fixing and testing of LT distribution board made out of 2mm thick MS sheet of size not less than 1000x1000x150mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed comprising of the following(Make: LT panel shall be manufactured by one make mentioned in the List of makes under PS) :- (i) Copper bus bar chamber TPN of 250 amps rating (Set of four strip). (ii) Phase indicating lamp Set of three. (iii) Voltmeter (0-500V), three phase, digital type with inbuilt selector switch-01 set(iv) Ammeter (0-300 Amps) three phase, digital type with inbuilt selector switch incl CT\"s - 01 set(v) MCCB four pole 415 volts AC 50 Hz, 200 amps rating breaking capacity 25 KA fixed magnetic and adjustable thermal release - 01 No. (vi) MCCB two pole 415 volts AC 50 Hz, 160 amps rating breaking capacity 25 KA fixed magnetic and adjustable thermal release - 05 No. |
| 121 | Supply and install split AC of capacity 1.5 ton indoor/outdoor complete including stand for installation of out door unit with cordless remote control unit, 5 star rated, copper condensor, dual invertor complete all as specified and directed. |
| 122 | Supply and fix automatic Voltage stablizersingle phase aircooled indoor type & designed for input variation Voltage stablized at 230 V with aacuracy of +- 2.5% of capacity 5 KVA complete all as specified and directed. |
| 123 | M&L for Sub main wiring with two single core PVC insulated unsheathed, grade cable 6.0 sq.mm (nominal area) FRLS type multi stranded copper conductor and one run of 6 sq.mm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire connected to common earth as per IS including provision of cutting chases for conduit and sinking for boxes including making good to walls disturbed surfaces and applying finishes to match existing surfaces and laying through and including provision of 20mm dia \"medium grade\"PVC conduit and fittings,complete all as specified and directed.NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit and its fittings shall be measured as one unit length.(ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly. |
| 124 | S&F TPN DB double door 4 way 415V incl busbar double door and other accessories without MCB complete all as specified and directed. |
| 125 | Supply & fixing MCB , TPN, AC, 415 volts of 100 Amps capacity 10KA, \"C\" series and making connections with suitable size of copper lugs complete all as specified and directed. |
| 126 | Supply, laying,testingXLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ corecomplete all as specified and directed. |
| 127 | S&F 50 mm dia Galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/ floor etc for cable protection, complete all as specified and directed. |
